# catch can preference???

**URL:** <https://forums.speedlife.net/t/catch-can-preference/192198>\
**Category:** PittSpeed Automotive\
**Created:** [September 4, 2007, 9:20am UTC](https://forums.speedlife.net/t/catch-can-preference/192198 "2007-09-04T09:20:50Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![nitroice40](https://avatars.discourse-cdn.com/v4/letter/n/7bcc69/32.png) [@nitroice40](https://forums.speedlife.net/u/nitroice40)\
**Post date:** [September 4, 2007, 6:55pm UTC](https://forums.speedlife.net/t/catch-can-preference/192198/12 "2007-09-04T18:55:35Z")

</div>

> [@2 yr old raped by pitbull](https://forums.speedlife.net/t/2-yr-old-raped-by-pitbull/32164/89):
>
> top fittings to the valve cover bottom ones to the block…right?

Yes.

You can get them from Tony1 for $250. There is a little more than $100 in the material, so its not really worth it for me to start selling them. But here is a pic installed.

 ![http://i42.photobucket.com/albums/e342/nitroice40/P1010381.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/6/6/66ac7596110885abf8583cff3927a4729470535d.jpeg)

Joe, I almost have that motor mount done I told you I would make you. I had a hard time trying to tig weld it the rubber kept melting so I had to mig weld it and grind it down. Not my best work but will do the job. I just need to weld some more reinforcement around the center shaft.

 ![http://i42.photobucket.com/albums/e342/nitroice40/P1010385.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/b/a/ba6cdaa79caf2ae4f80d692b34d0370cf2c2f4ce.jpeg)  
 ![http://i42.photobucket.com/albums/e342/nitroice40/P1010384-1.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/f/4/f4d2e133f9814b3f4d14dae92d647a944b193099.jpeg)

---

_[View the full topic](https://forums.speedlife.net/t/catch-can-preference/192198)._