# CF Hood

**URL:** <https://forums.speedlife.net/t/cf-hood/110556>\
**Category:** SON240sx Automotive\
**Created:** [October 26, 2007, 5:32pm UTC](https://forums.speedlife.net/t/cf-hood/110556 "2007-10-26T17:32:09Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![logik23](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/logik23/32/5548_2.png) [@logik23](https://forums.speedlife.net/u/logik23)\
**Post date:** [October 26, 2007, 5:32pm UTC](https://forums.speedlife.net/t/cf-hood/110556/1 "2007-10-26T17:32:09Z")

</div>

So I need a new hood because of an accident and was looking at CF hoods, but there are many out there with different levels of quality, rolled edges, decent clear coat, squeleton, etc…who makes a good one?

---

<div class="post-metadata">

**Author:** ![BAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bas/32/5540_2.png) [@BAS](https://forums.speedlife.net/u/BAS)\
**Post date:** [October 26, 2007, 10:00pm UTC](https://forums.speedlife.net/t/cf-hood/110556/2 "2007-10-26T22:00:24Z")

</div>

look for a CF hood that made using EPOXY w/a clear coat, anything else is crap for a hood. ‘esters’ loose their strength ( sag temp) around 180 F this is where hoods start to get shrinkage around the edges, surface droop and in some cases bubbling in the resin.

---

<div class="post-metadata">

**Author:** ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)\
**Post date:** [October 27, 2007, 7:03am UTC](https://forums.speedlife.net/t/cf-hood/110556/3 "2007-10-27T07:03:41Z")

</div>

siebon is good? which i hear all the time.

---

<div class="post-metadata">

**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\
**Post date:** [October 27, 2007, 7:07am UTC](https://forums.speedlife.net/t/cf-hood/110556/4 "2007-10-27T07:07:40Z")

</div>

yeah. big money try a place called cf technologies

---

<div class="post-metadata">

**Author:** ![logik23](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/logik23/32/5548_2.png) [@logik23](https://forums.speedlife.net/u/logik23)\
**Post date:** [October 27, 2007, 9:46am UTC](https://forums.speedlife.net/t/cf-hood/110556/5 "2007-10-27T09:46:39Z")

</div>

k thanks for the asnwers guys, i doubt ill get one cause its costing me so much to pull out the rad support lol

---

<div class="post-metadata">

**Author:** ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)\
**Post date:** [October 27, 2007, 9:47am UTC](https://forums.speedlife.net/t/cf-hood/110556/6 "2007-10-27T09:47:42Z")

</div>

^what happened?

---

<div class="post-metadata">

**Author:** ![logik23](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/logik23/32/5548_2.png) [@logik23](https://forums.speedlife.net/u/logik23)\
**Post date:** [October 27, 2007, 9:54am UTC](https://forums.speedlife.net/t/cf-hood/110556/7 "2007-10-27T09:54:38Z")

</div>

I wasn’t paying attention like a retard and slid into a van in traffic.