# changing wheel studs

**URL:** <https://forums.speedlife.net/t/changing-wheel-studs/132901>\
**Category:** Canada Nissan Automotive\
**Created:** [February 4, 2007, 5:21am UTC](https://forums.speedlife.net/t/changing-wheel-studs/132901 "2007-02-04T05:21:12Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [February 4, 2007, 7:15am UTC](https://forums.speedlife.net/t/changing-wheel-studs/132901/3 "2007-02-04T07:15:06Z")

</div>

> [@Say Something About the Poster Above You](https://forums.speedlife.net/t/say-something-about-the-poster-above-you/808/393):
>
> I believe the stud is pressed in and the only way to get the stud without a press would be to heat of the hub instead of the stud. At the same time you would probably need to freeze the stud.
> 
> My suggestion is to take off the hub and take it to a machine shop or auto shop with a press to take out and put in the new studs.

i thought of that and i dont know if its safe to remove the pin thing holding the hub to the car. its the double fish hook shapped thing. i also have a blowtorch and was wondering how i can cool the studs while still heating the hub?

---

_[View the full topic](https://forums.speedlife.net/t/changing-wheel-studs/132901)._