# Cheap LCD for CNC Project **URL:** \ **Category:** Classifieds\ **Created:** [February 5, 2010, 8:27am UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979 "2010-02-05T08:27:57Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![zero5672](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zero5672/32/5255_2.png) [@zero5672](https://forums.speedlife.net/u/zero5672)\ **Post date:** [February 5, 2010, 8:27am UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/1 "2010-02-05T08:27:57Z")
Just like it says… It just has to display data What you guys have on the cheap? ---
**Author:** ![llink78](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/llink78/32/8037_2.png) [@llink78](https://forums.speedlife.net/u/llink78)\ **Post date:** [February 5, 2010, 10:22am UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/2 "2010-02-05T10:22:59Z")
i have a 15ich for $20. has a small 1/4 inch black defect in the bottom right corner of the screen. and its a LCD ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [February 5, 2010, 10:42am UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/3 "2010-02-05T10:42:01Z")
I have a 17" monitor. has a light green stripe down 1" of the left side sometimes. you can have it if you can find a way into my storage unit. I broke the key off of the lock. Its one of those round styles In batavia ---
**Author:** ![zero5672](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zero5672/32/5255_2.png) [@zero5672](https://forums.speedlife.net/u/zero5672)\ **Post date:** [February 5, 2010, 11:52am UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/4 "2010-02-05T11:52:59Z")
> [@llink78](#): > > i have a 15ich for $20. has a small 1/4 inch black defect in the bottom right corner of the screen. and its a LCD brand? ---
**Author:** ![zero5672](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zero5672/32/5255_2.png) [@zero5672](https://forums.speedlife.net/u/zero5672)\ **Post date:** [February 5, 2010, 11:53am UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/5 "2010-02-05T11:53:44Z")
> [@travisn](#): > > I have a 17" monitor. has a light green stripe down 1" of the left side sometimes. > > you can have it if you can find a way into my storage unit. I broke the key off of the lock. Its one of those round styles > > In batavia I’d get charged with B&E lol, just my luck ---
**Author:** ![zero5672](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zero5672/32/5255_2.png) [@zero5672](https://forums.speedlife.net/u/zero5672)\ **Post date:** [February 5, 2010, 11:54am UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/6 "2010-02-05T11:54:35Z")
> [@llink78](#): > > i have a 15ich for $20. has a small 1/4 inch black defect in the bottom right corner of the screen. and its a LCD Is this part of your $150 PC FS? ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [February 5, 2010, 1:10pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/7 "2010-02-05T13:10:24Z")
> [@zero5672](#): > > I’d get charged with B&E lol, just my luck nah, no one is ever there. as far as anyone would know I hired you. regardless I need to figure out how to cut this lock. the key is broke inside and I tried using a large screw driver to turn it and its defintiely ruined now ---
**Author:** ![Hass](https://avatars.discourse-cdn.com/v4/letter/h/51bf81/32.png) [@Hass](https://forums.speedlife.net/u/Hass)\ **Post date:** [February 5, 2010, 3:27pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/8 "2010-02-05T15:27:51Z")
> [@travisn](#): > > nah, no one is ever there. as far as anyone would know I hired you. > > regardless I need to figure out how to cut this lock. the key is broke inside and I tried using a large screw driver to turn it and its defintiely ruined now grinder + cutting wheel? ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [February 5, 2010, 3:55pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/9 "2010-02-05T15:55:06Z")
its in the middle of no where, I doubt there is a power outlet. havent checked yet though. lol my offer still stands… ---
**Author:** ![zero5672](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zero5672/32/5255_2.png) [@zero5672](https://forums.speedlife.net/u/zero5672)\ **Post date:** [February 5, 2010, 5:07pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/10 "2010-02-05T17:07:21Z")
> [@travisn](#): > > its in the middle of no where, I doubt there is a power outlet. havent checked yet though. lol > > my offer still stands… Where is this exactly? and I would have to have you there while I did this ---
**Author:** ![llink78](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/llink78/32/8037_2.png) [@llink78](https://forums.speedlife.net/u/llink78)\ **Post date:** [February 5, 2010, 5:08pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/11 "2010-02-05T17:08:56Z")
yes its the one in my thread. im keeping the tower but everything else is for sale still ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [February 5, 2010, 5:14pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/12 "2010-02-05T17:14:37Z")
> [@travisn](#): > > its in the middle of no where, I doubt there is a power outlet. havent checked yet though. lol > > my offer still stands… LOL… as if shore power was the only way to make power tools work. ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [February 5, 2010, 5:39pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/13 "2010-02-05T17:39:43Z")
but its the only way _I_ have a way to make power tools work. its in Batavia 2 miles from the thruway exit. Ill probably go mess with it tomorrow morning just to see what I can come up with. ---
**Author:** ![llink78](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/llink78/32/8037_2.png) [@llink78](https://forums.speedlife.net/u/llink78)\ **Post date:** [February 5, 2010, 7:26pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/14 "2010-02-05T19:26:55Z")
ill take it 🙂 i have some bolt cutters ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [February 5, 2010, 9:43pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/15 "2010-02-05T21:43:01Z")
> [@llink78](#): > > ill take it 🙂 i have some bolt cutters :ham: ---
**Author:** ![suzukiriderman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/suzukiriderman/32/7421_2.png) [@suzukiriderman](https://forums.speedlife.net/u/suzukiriderman)\ **Post date:** [February 5, 2010, 10:13pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/16 "2010-02-05T22:13:00Z")
> [@travisn](#): > > I have a 17" monitor. has a light green stripe down 1" of the left side sometimes. > > you can have it if you can find a way into my storage unit. I broke the key off of the lock. Its one of those round styles > > In batavia Do you have another key for the lock? ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [February 5, 2010, 10:18pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/17 "2010-02-05T22:18:05Z")
I think I used to at one point. but I jammed a large flat head screwdriver in there to turn the key but i think it got pushed in too far (who knew?!) so its all messed up. ---
**Author:** ![llink78](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/llink78/32/8037_2.png) [@llink78](https://forums.speedlife.net/u/llink78)\ **Post date:** [February 5, 2010, 10:55pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/18 "2010-02-05T22:55:05Z")
ok good point… how about the JAWS OF LIFE 🙂 just find me somewhere to plug the bad boy in ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [February 5, 2010, 10:59pm UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/19 "2010-02-05T22:59:40Z")
> [@llink78](#): > > ok good point… how about the JAWS OF LIFE 🙂 just find me somewhere to plug the bad boy in I cased the joint tonight and there is a plug on the main building about 45 feet away. this is the monitor [LINK](http://cgi.ebay.com/Samsung-SyncMaster-710N-Black-17-inch-LCD-Monitor_W0QQitemZ170307799005QQcmdZViewItemQQptZComputer_Monitors?hash=item27a722c7dd) I have the orginal box and all that jazz too ---
**Author:** ![zero5672](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zero5672/32/5255_2.png) [@zero5672](https://forums.speedlife.net/u/zero5672)\ **Post date:** [February 6, 2010, 5:27am UTC](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979/20 "2010-02-06T05:27:42Z")
> [@travisn](#): > > I cased the joint tonight and there is a plug on the main building about 45 feet away. > > this is the monitor [LINK](http://cgi.ebay.com/Samsung-SyncMaster-710N-Black-17-inch-LCD-Monitor_W0QQitemZ170307799005QQcmdZViewItemQQptZComputer_Monitors?hash=item27a722c7dd) I have the orginal box and all that jazz too When do you wanna make the hit? [Next page](https://forums.speedlife.net/t/cheap-lcd-for-cnc-project/78979.md?page=2)