# Chrome spacers **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [November 18, 2006, 11:03am UTC](https://forums.speedlife.net/t/chrome-spacers/186295 "2006-11-18T11:03:58Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)\ **Post date:** [November 18, 2006, 11:03am UTC](https://forums.speedlife.net/t/chrome-spacers/186295/1 "2006-11-18T11:03:58Z")
looking for some chrome spacer for my bike, the spacers that look like cylinders, or stainless, tried summit, and jegs and pepboys. nothing any speciality shops around? ---
**Author:** ![obi-1](https://avatars.discourse-cdn.com/v4/letter/o/ac8455/32.png) [@obi-1](https://forums.speedlife.net/u/obi-1)\ **Post date:** [November 18, 2006, 11:58am UTC](https://forums.speedlife.net/t/chrome-spacers/186295/2 "2006-11-18T11:58:49Z")
Are you looking for axle spacers? Try this place: [http://www.krooners.com](http://www.krooners.com) I bought spacers and other parts off of them before. If you know the length and diameter, you can order them already cut. Or else, you might have to buy a 6 inch piece of spacer stock and find a local machinist to part it. (That’s what I had to do.) Lots of bike shops, Harley or other, carry aftermarket catalogs. Kustom Khrome, Chrome Specialties, Dennis Kirk, Biker’s Choice… You can probably walk in to any of them and they could help you out. ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [November 19, 2006, 8:41pm UTC](https://forums.speedlife.net/t/chrome-spacers/186295/3 "2006-11-19T20:41:29Z")
i think there may still be a stainless spacerat the shop still but would have to look though ---
**Author:** ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)\ **Post date:** [November 20, 2006, 6:43pm UTC](https://forums.speedlife.net/t/chrome-spacers/186295/4 "2006-11-20T18:43:54Z")
i tried jp, they dont carry anything for the dims I need they have spacers for are .5 in length, or they just dont know what they have, but I need chrome spacers .75" in length and ID no more the .5, 3/8 is doable. I went to lowes and go steel but I dont know the cost of chroming such a small piece or just have them coated black, or can they be coated silver. ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [November 21, 2006, 10:10pm UTC](https://forums.speedlife.net/t/chrome-spacers/186295/5 "2006-11-21T22:10:02Z")
might be easier to go to machine shop to have them made. it should be too much since you are looking at a small simple piece to make. having them coated would be very cheap to do. chrome on the other hand would be different story.