# clanking noise from weight transfer? **URL:** \ **Category:** SON240sx Automotive\ **Created:** [September 11, 2008, 6:56am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382 "2008-09-11T06:56:14Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\ **Post date:** [September 11, 2008, 6:56am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/1 "2008-09-11T06:56:14Z")
Well i just recently got coilovers and upgraded to 30mm iron calipers up front and well ever since i finished the swap i 've been hearing a clanking noise, kind of like something just shifts when i hit the brakes. It only happens if the car was just reversed and then put in drive, for example getting out of my driveway and then going down to the street and pressing the brakes. I ve taken apart that side countless times to pinpoint the noise, and i’ve come the conclusion that it can’t be the coilover, or the rims and tires, only thing i c that could be causing the problem is either the ball joint connection in the tension rod or maybe a bushing somewhere, i ve taken the rim off and shaked the suspension in that corner several times and have never been able to get a sound to come, any ideas. Thanks, Harmit ---
**Author:** ![KA24Power](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ka24power/32/5595_2.png) [@KA24Power](https://forums.speedlife.net/u/KA24Power)\ **Post date:** [September 11, 2008, 7:03am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/2 "2008-09-11T07:03:31Z")
check the tension rod bushings, if they’re shot you might have some play up there. If not, check the lower balljoint. ---
**Author:** ![KA24Power](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ka24power/32/5595_2.png) [@KA24Power](https://forums.speedlife.net/u/KA24Power)\ **Post date:** [September 11, 2008, 7:04am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/3 "2008-09-11T07:04:20Z")
or it might be the sway bar link… but you probably would have seen that when you pulled the wheel off checking for the sound. ---
**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\ **Post date:** [September 11, 2008, 7:04am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/4 "2008-09-11T07:04:44Z")
i replaced the ball joints with s14 ball joints when i put on the new brakes. ---
**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\ **Post date:** [September 11, 2008, 7:06am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/5 "2008-09-11T07:06:31Z")
i replaced the end link bushings when i did the ball joints as well. ---
**Author:** ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)\ **Post date:** [September 11, 2008, 10:52am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/6 "2008-09-11T10:52:47Z")
sounds exactly like the slider bore in the caliper bracket has worn larger… but Z brakes don’t use sliders… weird. did the pads fit on the pins tightly when you put it together? ---
**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\ **Post date:** [September 11, 2008, 11:04am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/7 "2008-09-11T11:04:44Z")
the pins went in with a tiny push, wouldn’t those make a big clanking noise everytime i brake, and would make that big of a noise. ---
**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\ **Post date:** [October 9, 2008, 8:13am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/8 "2008-10-09T08:13:40Z")
alrite so i still got this noise going on, its gotten considerably louder, i took off my calipers fully checked them, they cannot be the problem, and i checked my coils, they do not bind or anything, leading me to the conlclusion that it is most likely just the tension rod, You agree? ---
**Author:** ![sidewayz240](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)\ **Post date:** [October 10, 2008, 8:15am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/9 "2008-10-10T08:15:11Z")
yes, agreed. ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [October 10, 2008, 8:21am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/10 "2008-10-10T08:21:41Z")
if its front to back it’s tension rods. ---
**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\ **Post date:** [October 10, 2008, 8:41am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/11 "2008-10-10T08:41:46Z")
> [@bing"](#): > > if its front to back it’s tension rods. Yes, it shifts to the front while braking, and shifts to the back while accelerating. If that’s what you mean? ---
**Author:** ![sidewayz240](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)\ **Post date:** [October 10, 2008, 9:04pm UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/12 "2008-10-10T21:04:52Z")
yea thats what he means, might as well grab some pillowball tension rods while your in there. ---
**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\ **Post date:** [October 11, 2008, 9:00pm UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/13 "2008-10-11T21:00:01Z")
Yea i was in the process of ordering some of bing’s tension rods. ---
**Author:** ![Lucas180](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lucas180/32/5556_2.png) [@Lucas180](https://forums.speedlife.net/u/Lucas180)\ **Post date:** [October 12, 2008, 8:58am UTC](https://forums.speedlife.net/t/clanking-noise-from-weight-transfer/118382/14 "2008-10-12T08:58:27Z")
I used to have the same type of noise from my front end, tried everything to fix it and coudent find the problem…after a long time looking and trying everything i took it to a Nissan shop Simone performance…they found that my front sub frame had come lose! lol if you drift the car …and drive it hard ide check your subframe in the front …it sounds odd but it could be your problem! Do you feel anything in the floor of the car when it makes the noise ?