# CLEAN LS1 240 **URL:** \ **Category:** Shift518 Automotive\ **Created:** [November 22, 2012, 5:51am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571 "2012-11-22T05:51:10Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![yota](https://avatars.discourse-cdn.com/v4/letter/y/76d3ee/32.png) [@yota](https://forums.speedlife.net/u/yota)\ **Post date:** [November 22, 2012, 5:51am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/1 "2012-11-22T05:51:10Z")
Found this on another site I’m on. This thing is fucking awesome lol Red LS1 97 Nissan 240sx Chassie Mileage 127,000 Engine Mileage less than 1500 Engine Components oil pan to intake \Sikky V2 7qt oil pan ARP rod bolts New main bearings and rod bearings and rings Factory rods and pistons Texas Speed Ported oil pump Texas Speed Ls2 Timing Chain Texas Speed 228r cam shaft on a 112LSA ARP head studs GM MLS Head Gaskets LS7 Lifters and new lifter trays Patriot Stage 2.5 Cylinder heads (243 casting) Patriot Extrem Double Valve Springs GM rockers 7.40 Chromoly push rods Fast 90 intake and throttle body TRE 36lb injectors walbro 255 fuel pump taylor thuder volt plug wires Sikky 1 3/4 long tube headers New GM water Pump Sikky trans mounts and motor mounts Vengance Racing oil catch can Sikky power steering line Sikky oil filter relocation Daft Innovations ls7 fuel filter setup MSD High Torq starter Sikky wiring harness every gasket on the motor is new Transmission and Rear End 12 in Centerforce clutch Centerforce Billet Fly wheel ARP Flywheel Bolts 2004 m12 GTO 6 Speed Trans mission Hurst Shifter GM Clutch slave Cylinder 48" remote bleeder Wilwood clutch Master Cylinder 1 piece Alumium Drive Shaft 3.90 gear rear end with 5 bolt Axels poly unerthane rear end bushings and sun frame bushings SLP 160degree thermostat ISIS 3row Aluminum Radiator Isis dual fans plus Alumium Shroud KYB Shocks with tein S-tech Springs RPM 505 wheels 18x9.5 and 18.8.5 flaken tires sikky 32mm front sway bar New body parts: OEM Front Bumper JDM front spoiler Windsheild and seals new oem corner lights fresh Paint Y pipe into Megan racing muffler Auto Meter digital oil pressure gauge and water temp dakota digital box (for speedo) ![http://i1128.photobucket.com/albums/m487/XSKYSOLDIER/4E3FFC51-E2B2-4D5B-BAC1-C074DB3257B1-2871-0000023D60B0C0F9_zpsf98a722a.jpg](http://i1128.photobucket.com/albums/m487/XSKYSOLDIER/4E3FFC51-E2B2-4D5B-BAC1-C074DB3257B1-2871-0000023D60B0C0F9_zpsf98a722a.jpg) ![http://i1128.photobucket.com/albums/m487/XSKYSOLDIER/2EFCC102-C8A0-472E-BED0-143718EBD623-2871-0000023D66833276_zpsba05c7a2.jpg](http://i1128.photobucket.com/albums/m487/XSKYSOLDIER/2EFCC102-C8A0-472E-BED0-143718EBD623-2871-0000023D66833276_zpsba05c7a2.jpg) ![http://i1128.photobucket.com/albums/m487/XSKYSOLDIER/3671E825-E57F-488C-A242-5C671472FE36-2871-00000240A6DBC296_zps9be1d6f8.jpg](http://i1128.photobucket.com/albums/m487/XSKYSOLDIER/3671E825-E57F-488C-A242-5C671472FE36-2871-00000240A6DBC296_zps9be1d6f8.jpg) ---
**Author:** ![indy440](https://avatars.discourse-cdn.com/v4/letter/i/b5ac83/32.png) [@indy440](https://forums.speedlife.net/u/indy440)\ **Post date:** [November 22, 2012, 5:56am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/2 "2012-11-22T05:56:58Z")
wow thats nuts. is it for sale? ---
**Author:** ![yota](https://avatars.discourse-cdn.com/v4/letter/y/76d3ee/32.png) [@yota](https://forums.speedlife.net/u/yota)\ **Post date:** [November 22, 2012, 6:02am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/3 "2012-11-22T06:02:48Z")
Kinda… The guy that posted it was offered this car in trade for his C5Z. Supposedly there is around $25k in work done to the 240 and the paint is only 2 weeks old. ---
**Author:** ![sbardy](https://avatars.discourse-cdn.com/v4/letter/s/8edcca/32.png) [@sbardy](https://forums.speedlife.net/u/sbardy)\ **Post date:** [November 22, 2012, 6:06am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/4 "2012-11-22T06:06:17Z")
so clean ---
**Author:** ![Skidplate](https://avatars.discourse-cdn.com/v4/letter/s/c2a13f/32.png) [@Skidplate](https://forums.speedlife.net/u/Skidplate)\ **Post date:** [November 22, 2012, 5:43pm UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/5 "2012-11-22T17:43:51Z")
holy cleanliness ---
**Author:** ![Alpine](https://avatars.discourse-cdn.com/v4/letter/a/4da419/32.png) [@Alpine](https://forums.speedlife.net/u/Alpine)\ **Post date:** [November 22, 2012, 7:14pm UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/6 "2012-11-22T19:14:23Z")
> Y pipe into Megan racing muffler Car is ruined. Lock 1 ---
**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\ **Post date:** [November 23, 2012, 5:53am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/7 "2012-11-23T05:53:38Z")
For NY state the car is ruined. Good luck ever getting that to pass inspection when they go to scan the ecu and get chevy codes ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [November 23, 2012, 6:31am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/8 "2012-11-23T06:31:59Z")
> [@Items For Sale](https://forums.speedlife.net/t/items-for-sale/51091/5): > > For NY state the car is ruined. Good luck ever getting that to pass inspection when they go to scan the ecu and get chevy codes Vermont registration will fix that. I think you just need a PO box there to get it registered and in VT anything goes. ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [November 23, 2012, 6:33am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/9 "2012-11-23T06:33:29Z")
Vt is going emmisions this yr as well ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [November 23, 2012, 12:10pm UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/10 "2012-11-23T12:10:08Z")
97 ohhh balls. (time to buy that rusted out 95 or older shell with clean title) ---
**Author:** ![GD3Skier](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gd3skier/32/6400_2.png) [@GD3Skier](https://forums.speedlife.net/u/GD3Skier)\ **Post date:** [November 23, 2012, 12:12pm UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/11 "2012-11-23T12:12:24Z")
NY should seriously offer the ability to opt out of the emmissions side of an inspection and have the customer pay an additional “environmental” fee or something like that. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [November 23, 2012, 12:19pm UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/12 "2012-11-23T12:19:11Z")
/\ sign me up! Or… Allow you to ask to be put on the sniffer. and if your shit passes give me my sticker. (+obvious safety inspections too) That car, with that engine running right is probably cleaner running than half the questionable shitbox’s you see misfiring down the road with flappy rotted fenders with current inspection stickers becasue they are pre 1995. ---
**Author:** ![car\_ramrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/car_ramrod/32/6441_2.png) [@car\_ramrod](https://forums.speedlife.net/u/car_ramrod)\ **Post date:** [November 23, 2012, 3:16pm UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/13 "2012-11-23T15:16:52Z")
it looks nice, don’t get me wrong, but does anyone else think its redonkulous to pay close to 20k for what, at the end of the day, is still a Nissan 240sx ---
**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\ **Post date:** [November 23, 2012, 3:26pm UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/14 "2012-11-23T15:26:57Z")
sweet. A car for 20k with a ls1 go buy a c5 or a f-body for 10k and put the other 10k you just saved into it and mop up. ---
**Author:** ![AVB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/avb/32/6751_2.png) [@AVB](https://forums.speedlife.net/u/AVB)\ **Post date:** [November 23, 2012, 3:37pm UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/15 "2012-11-23T15:37:25Z")
> [@\*\*\*\*Official: Southgate Meet Thread\*\*\*\*](https://forums.speedlife.net/t/official-southgate-meet-thread/29171/2988): > > sweet. A car for 20k with a ls1 > > go buy a c5 or a f-body for 10k and put the other 10k you just saved into it and mop up. Agreed. Or for $20k buy a s15. S14’s look like shit IMO. ---
**Author:** ![toomanycamaros](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toomanycamaros](https://forums.speedlife.net/u/toomanycamaros)\ **Post date:** [November 24, 2012, 5:35pm UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/16 "2012-11-24T17:35:03Z")
> [@Items For Sale](https://forums.speedlife.net/t/items-for-sale/51091/5): > > For NY state the car is ruined. Good luck ever getting that to pass inspection when they go to scan the ecu and get chevy codes 97 is pre vin recognition so depending on what year PCM and tuning software is used it might not be a problem ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [November 28, 2012, 7:30am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/17 "2012-11-28T07:30:24Z")
So let me get this straight. As long as the ecu running the motor isnt vin encoded/etched/what have you, (IE when its plugged in to NYSDMV it doesnt show up a VIN number and look like you just plugged a vette in to the computer while trying to inspect a nissan). NYS DMV doesnt know enough to realize anything is a miss. More or less it will look for readyness and MIL codes and either pass or fail. I know for a fact that even if the car you are tyring to inspect has a VIN encoded ecu, and the VIN on the ECU doesnt match the one you scanned on the windshield to start the inspection, YET the motor and ecu are running 100% fine and will pass… it will pass and you walk out with a sticker. BUT when they upload to DMV, they might get flagged becasue of the missmatch. So either the shop or the registered owner might get a letter. So, that tells me the first assumption is correct. If say this ECU is wiped clean of any trace what car the donor was, NYS will be none the wiser. it will pass as long as its running fine. And even if its vin encoded with some other car it will still pass, but might get caught once its uploaded to nys. My next question for you GM ecu gurus, how hard is it to take say an LS3,6,7 or what ever out of a newer chassis than the classic LS1 and blow out the VIN and donor vehicle information so its more or less an empty ecu running the engine? ---
**Author:** ![GD3Skier](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gd3skier/32/6400_2.png) [@GD3Skier](https://forums.speedlife.net/u/GD3Skier)\ **Post date:** [November 28, 2012, 10:36am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/18 "2012-11-28T10:36:56Z")
I think you’re giving dmv too much credit. To my knowledge looking at inspection records at work if there’s no vin recognition and the machine doesn’t pick up on it all the DMV sees is the VIN scanned and the result (pass or fail) ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [November 28, 2012, 11:51am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/19 "2012-11-28T11:51:10Z")
> [@On another topic](https://forums.speedlife.net/t/51152/50): > > I think you’re giving dmv too much credit. To my knowledge looking at inspection records at work if there’s no vin recognition and the machine doesn’t pick up on it all the DMV sees is the VIN scanned and the result (pass or fail) Thats good then. I figured the software was smart enough to atleast see that the scan’d vin XXXXX didnt match the PCM vin ZZZZZZ and flag it. (KK looks around at the agency he works for) NM, shouldnt have assumed that the software would A: make sense or B: even work right. hahahahahaha ---
**Author:** ![GD3Skier](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gd3skier/32/6400_2.png) [@GD3Skier](https://forums.speedlife.net/u/GD3Skier)\ **Post date:** [November 28, 2012, 11:54am UTC](https://forums.speedlife.net/t/clean-ls1-240/265571/20 "2012-11-28T11:54:20Z")
Yup there very well could be something behind the scenes I’m not a programmer lol. But from what I see its the vin entered and a simple pass/fail. But like you said when does the state make something that involved lol. [Next page](https://forums.speedlife.net/t/clean-ls1-240/265571.md?page=2)