# Clocking a turbo,

**URL:** <https://forums.speedlife.net/t/clocking-a-turbo/92760>\
**Category:** SON240sx Automotive\
**Created:** [February 10, 2006, 4:26pm UTC](https://forums.speedlife.net/t/clocking-a-turbo/92760 "2006-02-10T16:26:19Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [February 10, 2006, 4:26pm UTC](https://forums.speedlife.net/t/clocking-a-turbo/92760/1 "2006-02-10T16:26:19Z")

</div>

Alright my T28 need to be clocked but I need to move the compressor side and the exhaust side, they are both off,

how do I move each side independant of the center???

---

<div class="post-metadata">

**Author:** ![Ed1](https://avatars.discourse-cdn.com/v4/letter/e/958977/32.png) [@Ed1](https://forums.speedlife.net/u/Ed1)\
**Post date:** [February 10, 2006, 8:42pm UTC](https://forums.speedlife.net/t/clocking-a-turbo/92760/2 "2006-02-10T20:42:12Z")

</div>

try to make it so that the exhaust side only needs to be adjusted…  
which is way easier than the compressor  
the compressor requires that you to loose the 4/6 bolts that’s attached to the middle

edit: oh the exhaust all you need is some long bent nose plier to hold the c ring while you turn the exhaust

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [February 11, 2006, 12:12pm UTC](https://forums.speedlife.net/t/clocking-a-turbo/92760/3 "2006-02-11T12:12:29Z")

</div>

ya I have to move both sides, the compressor and the center section are not where they should be to eachother,

---

<div class="post-metadata">

**Author:** ![Jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@Jesse](https://forums.speedlife.net/u/Jesse)\
**Post date:** [February 11, 2006, 2:51pm UTC](https://forums.speedlife.net/t/clocking-a-turbo/92760/4 "2006-02-11T14:51:39Z")

</div>

3 words

big fuckin hammer… 🙂

---

<div class="post-metadata">

**Author:** ![MR.Large](https://avatars.discourse-cdn.com/v4/letter/m/eada6e/32.png) [@MR.Large](https://forums.speedlife.net/u/MR.Large)\
**Post date:** [February 11, 2006, 3:25pm UTC](https://forums.speedlife.net/t/clocking-a-turbo/92760/5 "2006-02-11T15:25:29Z")

</div>

benson bring it over when im home i’ll clock it for you had to do the same to my last turbo

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [February 12, 2006, 12:01pm UTC](https://forums.speedlife.net/t/clocking-a-turbo/92760/6 "2006-02-12T12:01:09Z")

</div>

Whoot Whoot Mikey

ill call you this week so msn me your Schedual, I am always around