# Clutch wont Dis-engage- NEED HELP

**URL:** <https://forums.speedlife.net/t/clutch-wont-dis-engage-need-help/211827>\
**Category:** SON240sx Automotive\
**Created:** [April 29, 2011, 9:19am UTC](https://forums.speedlife.net/t/clutch-wont-dis-engage-need-help/211827 "2011-04-29T09:19:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![JonathanPrem](https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/32.png) [@JonathanPrem](https://forums.speedlife.net/u/JonathanPrem)\
**Post date:** [April 29, 2011, 9:19am UTC](https://forums.speedlife.net/t/clutch-wont-dis-engage-need-help/211827/1 "2011-04-29T09:19:58Z")

</div>

Hi guys,

I need some help, I installed clutch master clutch with 600miles on it for my s14 Ka. I bled the system by presses in the pedal few time then holding it down and releasing the bleeder on the slave. I’ve done it over 15 times but i still cant get pressure. I’ve replaced the pivot ball, release bearing, slave, master cylinder and ss lines. I also dont have the dampener box. If i have the rear wheel up in the air i can get it into gear since it has no load on it but cant when its on the ground. I also have the rod adjusted to the fullest as well(pedal highest point).I need help badly guys