# Coilover camber plate Help

**URL:** <https://forums.speedlife.net/t/coilover-camber-plate-help/195146>\
**Category:** PittSpeed Automotive\
**Created:** [January 30, 2008, 7:19pm UTC](https://forums.speedlife.net/t/coilover-camber-plate-help/195146 "2008-01-30T19:19:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![EvoCats2011](https://avatars.discourse-cdn.com/v4/letter/e/9f8e36/32.png) [@EvoCats2011](https://forums.speedlife.net/u/EvoCats2011)\
**Post date:** [January 30, 2008, 7:19pm UTC](https://forums.speedlife.net/t/coilover-camber-plate-help/195146/1 "2008-01-30T19:19:47Z")

</div>

I got a discount on a set of Coilovers for the Evo that were sent from KSport to be tested by vivid racing. After the test vivid racing said the camber plates rattle and should be redone, something neither me nor my friend has done. Does anyone have an idea and/or advice on how to do it?

---

<div class="post-metadata">

**Author:** ![paNX2K\_SE-R](https://avatars.discourse-cdn.com/v4/letter/p/dfb087/32.png) [@paNX2K\_SE-R](https://forums.speedlife.net/u/paNX2K_SE-R)\
**Post date:** [January 31, 2008, 4:35pm UTC](https://forums.speedlife.net/t/coilover-camber-plate-help/195146/2 "2008-01-31T16:35:41Z")

</div>

Is it just the spherical bearing thats bad? If these plates are built in a similar way as my Ground Control units you can simply remove a snap ring and then press the old bearing out and new one in.

---

<div class="post-metadata">

**Author:** ![06se-r](https://avatars.discourse-cdn.com/v4/letter/0/c5a1d2/32.png) [@06se-r](https://forums.speedlife.net/u/06se-r)\
**Post date:** [February 1, 2008, 6:42pm UTC](https://forums.speedlife.net/t/coilover-camber-plate-help/195146/3 "2008-02-01T18:42:46Z")

</div>

good luck with the ksports, i hear they always leak…