# Complete sr20det swap rebuilt with cosworth, hks, arp with ZERO KM CLEAN!! **URL:** \ **Category:** Classifieds\ **Created:** [January 29, 2013, 1:35pm UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452 "2013-01-29T13:35:56Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![maz](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@maz](https://forums.speedlife.net/u/maz)\ **Post date:** [January 29, 2013, 1:35pm UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/1 "2013-01-29T13:35:56Z")
hey guys i had originally planned to put this in my e30 but i decided to use the sr20 i used for mock up and sell this so i can buy another project car i had in mind… here are the parts… blacktop sr20det originally completely rebuilt with zero miles (named from top to bottom) valve cover wrinkle painted all new oem gaskets valve guides supertech valve seals oem valve springs and retainers circuitsport rocker arm stoppers timing chain kit head machined and resurfaced high temp ceramic painted head cosworth 1.1mm headgasket arp headstuds factory cams block machined and coated with high temp ceramic paint oem crankshaft oem pistons oem rods nissan main and rod bearings oem thrust washers s14 oil pump rebuilt with new pump gear and seal oem crank pulley light weight alt, ps, wp, pullies water pump oem oil pan circuitsports thermal intake manifold gasket cleaned factory intake manifold with ceramic high temp paint high temp ceramic painted oem exhaust manifold oem throttle body s15 480cc injectors factory fuel rail hks ball bearing gtss turbo good year stainless steel lines water and oil lines with thermal sleeves 3 inch stainless o2 housing os giken twin plate clutch sr20det transmission drive shaft no name short shifter hks ssq bov rb26 maf s13 tuned computer for this set up igniter chip coil packs cas all sensors needed for motor plug and play sr wiring harness ready for s13 every single bracket cleaned and painted everything has been documented for this motor and i have lots of pics of the build through out most of the parts came from [frsports.com](http://frsports.com) and a few from members on son240 and machining was done at speedy machine shop in newmarket i put a lot of time in this motor and didnt rush any of it. im sure there is someone that can appreciate this thing as much as i do compression test will be done in front of buyers looking to get $3700obo can be delivered to gta… if further… you can pay for my gas or come get it yourself in Aurora Ontario i will also put this on ebay tonight text, call or pm me at **289threethree84044** please text me if i don’t answer i might be working thanks in advance for looking here are some pics of the motor as it sits right now ![http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0189_zps576d1432.jpg](http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0189_zps576d1432.jpg) ![http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0188_zps08dea797.jpg](http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0188_zps08dea797.jpg) ![http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0186_zps88442b49.jpg](http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0186_zps88442b49.jpg) ![http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0171_zps92ca0446.jpg](http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0171_zps92ca0446.jpg) ![http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0169_zps77718d41.jpg](http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0169_zps77718d41.jpg) ![http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0167_zps8a568c90.jpg](http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0167_zps8a568c90.jpg) ![http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0366_zps1b8bebfe.jpg](http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0366_zps1b8bebfe.jpg) ![http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0190_zpsf29106cd.jpg](http://i30.photobucket.com/albums/c311/mahrod2005/IMAG0190_zpsf29106cd.jpg) ---
**Author:** ![karkas9](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@karkas9](https://forums.speedlife.net/u/karkas9)\ **Post date:** [January 29, 2013, 4:11pm UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/2 "2013-01-29T16:11:31Z")
that’s one hell of a deal! glws 90% of people cant put this together for less than 5 grand. ---
**Author:** ![maz](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@maz](https://forums.speedlife.net/u/maz)\ **Post date:** [January 29, 2013, 8:19pm UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/3 "2013-01-29T20:19:03Z")
> [@karkas9](#): > > that’s one hell of a deal! glws > 90% of people cant put this together for less than 5 grand. thanks for the support ---
**Author:** ![jdm-only](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jdm-only](https://forums.speedlife.net/u/jdm-only)\ **Post date:** [January 29, 2013, 9:59pm UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/4 "2013-01-29T21:59:20Z")
more like 10 gs with part’s and labor insane deal ---
**Author:** ![maz](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@maz](https://forums.speedlife.net/u/maz)\ **Post date:** [January 31, 2013, 8:42am UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/5 "2013-01-31T08:42:14Z")
wow… im really surprised that im getting no response for this setup… if it doesnt sell this week i will probably remove it, and sell it later for the amount i actually want because i already got the money for my next project earlier than i thought ---
**Author:** ![Cadence](https://avatars.discourse-cdn.com/v4/letter/c/9e8a1a/32.png) [@Cadence](https://forums.speedlife.net/u/Cadence)\ **Post date:** [January 31, 2013, 10:45am UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/6 "2013-01-31T10:45:10Z")
everyone’s too poor. even with an amazing deal. ---
**Author:** ![maz](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@maz](https://forums.speedlife.net/u/maz)\ **Post date:** [January 31, 2013, 12:13pm UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/7 "2013-01-31T12:13:16Z")
> [@Cadence](#): > > everyone’s too poor. even with an amazing deal. lol that’s true… ---
**Author:** ![koukis13](https://avatars.discourse-cdn.com/v4/letter/k/d2c977/32.png) [@koukis13](https://forums.speedlife.net/u/koukis13)\ **Post date:** [January 31, 2013, 1:02pm UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/8 "2013-01-31T13:02:47Z")
how much horse power is this motor rated for? ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [February 1, 2013, 5:03am UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/9 "2013-02-01T05:03:15Z")
+1 for the turbo. Had one on my s14. its a rockin setup. Bump for you. ---
**Author:** ![maz](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@maz](https://forums.speedlife.net/u/maz)\ **Post date:** [February 1, 2013, 9:21am UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/10 "2013-02-01T09:21:02Z")
> [@koukis13](#): > > how much horse power is this motor rated for? about 330hp this set up will do even more with bigger injectors > [@sharpe\_corners](#): > > +1 for the turbo. Had one on my s14. its a rockin setup. Bump for you. thanks ---
**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\ **Post date:** [February 1, 2013, 10:46am UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/11 "2013-02-01T10:46:01Z")
I would need compression test numbers for serious interest. ---
**Author:** ![maz](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@maz](https://forums.speedlife.net/u/maz)\ **Post date:** [February 1, 2013, 12:15pm UTC](https://forums.speedlife.net/t/complete-sr20det-swap-rebuilt-with-cosworth-hks-arp-with-zero-km-clean/228452/12 "2013-02-01T12:15:08Z")
> [@Singh](#): > > I would need compression test numbers for serious interest. sure… i can do that tonight