# CONVERTED my Focus SVT into an RS!

**URL:** <https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439>\
**Category:** Builds\
**Created:** [May 31, 2012, 6:20am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439 "2012-05-31T06:20:17Z")\
**Posts on this page:** 20\
**Page:** 21

<div class="post-metadata">

**Author:** ![Cornercarver82](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cornercarver82/32/6241_2.png) [@Cornercarver82](https://forums.speedlife.net/u/Cornercarver82)\
**Post date:** [January 21, 2013, 8:49pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/401 "2013-01-21T20:49:47Z")

</div>

Mondeo? and I really like the wheels as well

---

<div class="post-metadata">

**Author:** ![Super\_Sedan](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/super_sedan/32/6167_2.png) [@Super\_Sedan](https://forums.speedlife.net/u/Super_Sedan)\
**Post date:** [January 22, 2013, 2:01pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/402 "2013-01-22T14:01:17Z")

</div>

Just read through this whole thread and wanted to say that I am very impressed with the project. Great work - I’m looking forward to seeing the bodywork complete!

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [February 16, 2013, 11:13am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/403 "2013-02-16T11:13:39Z")

</div>

mini-update. Decided to go out and swap the REAL fenders on to see if I have any tweaking to do for molding them…driver side literally sat perfect…passenger side seems to have gotten a touch bent during shipping, so I have a few things to do before molding that one.

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-02-16125252_zps5c0eebf2.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-02-16125252_zps5c0eebf2.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-02-16125241_zps2bf336c5.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-02-16125241_zps2bf336c5.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-02-16125300_zps2dc0e7c2.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-02-16125300_zps2dc0e7c2.jpg)

COME ON WARM WEATHER! I HAVE STUFF TO DOOOOOOOOO

---

<div class="post-metadata">

**Author:** ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)\
**Post date:** [February 16, 2013, 1:01pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/404 "2013-02-16T13:01:52Z")

</div>

:tup: so far!

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 4, 2013, 12:04pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/405 "2013-03-04T12:04:32Z")

</div>

Hit the junkyard this weekend for some various items and noticed a wrecked mercury cougar…it was hit in the driver fender and the bumper had sorta cracked up in various pieces which caused me to notice the foglights are actually projector/HID, and that they MAY fit nicely in the RS bumper’s foglight holes…so I snagged them for $12 for the pair!

the housings were busted up a bit and the clear lenses over them were cracked right off, but I knew the projectors themselves were still in-tact so I brought them home and cracked the open. going to need to come up with a way to get a round lens over them to seal them up and make a mount, but I think they’ll work great!

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-03194409_zps4968e2e6.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-03194409_zps4968e2e6.jpg)

had a thought last night that I might be able to grab a 2-pack of some cheapy flashlights like the ones people usually keep under their kitchen sink and hack them up to make foglight housings to use these projectors…might go try to snag some flashlights at dollar general to give it a try.

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 9, 2013, 3:11pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/406 "2013-03-09T15:11:46Z")

</div>

started working on setting up the mold for the rear wing…more as I get further along tonight…waiting for silicone to dry before applying mold release followed by gelcoat and fiberglass…

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-09180445_zpsaa44d210.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-09180445_zpsaa44d210.jpg)

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 9, 2013, 5:18pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/407 "2013-03-09T17:18:05Z")

</div>

in gelcoat!

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-09200547_zpsaed96478.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-09200547_zpsaed96478.jpg)

---

<div class="post-metadata">

**Author:** ![Motocrossx23](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/motocrossx23/32/5120_2.png) [@Motocrossx23](https://forums.speedlife.net/u/Motocrossx23)\
**Post date:** [March 9, 2013, 6:00pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/408 "2013-03-09T18:00:47Z")

</div>

Looks super sexual.

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 9, 2013, 7:26pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/409 "2013-03-09T19:26:58Z")

</div>

indeed it is very sexual.

laying tons of fiberglass matt

![http://img.photobucket.com/albums/v112/focusinprogress/IMG-20130309-00302_zps0d41cedd.jpg](http://img.photobucket.com/albums/v112/focusinprogress/IMG-20130309-00302_zps0d41cedd.jpg)

![http://img.photobucket.com/albums/v112/focusinprogress/IMG-20130309-00303_zpscfea215c.jpg](http://img.photobucket.com/albums/v112/focusinprogress/IMG-20130309-00303_zpscfea215c.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-09220633_zpsfaefc94a.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-09220633_zpsfaefc94a.jpg)

got about 5 layers on there, will let cure until tomorrow and pop it off, then lay up the other said against the flange I’ve now made…

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 10, 2013, 11:55am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/410 "2013-03-10T11:55:29Z")

</div>

sooooooo, good news bad news…

the good news is the mold is going to work out, but the heat and whatnot generated in the chemical reaction from the gelcoat caused the paint on the wing to bubble and peel.

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-10140942_zps3e0b6a1c.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-10140942_zps3e0b6a1c.jpg)

---

<div class="post-metadata">

**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\
**Post date:** [March 11, 2013, 9:13am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/411 "2013-03-11T09:13:19Z")

</div>

I’m realizing that I don’t really understand what a gel coat is and when and why it’s used?

---

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [March 11, 2013, 9:20am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/412 "2013-03-11T09:20:29Z")

</div>

gelcoat is basically a type of paint for fiberglass, loosely speaking. But it’s much harder and much more difficult to scratch.

It’s the primary way to color/paint a boat. So when you see a boat, it’s not actually painted (usually), you’re seeing the gelcoat.

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 11, 2013, 9:42am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/413 "2013-03-11T09:42:20Z")

</div>

Gelocoat comes in a few different formulations AND pigments. Or you can add color to white gelcoat to acheive custom colors/pigments. It’s not REALLY like paint…

the orange stuff I’ve been using on molds is a tooling gel, it’s a bit thicker consistency and is a touch softer than the white stuff I use on the production pieces…tooling gel is meant to be used to give a smooth surface in/on your mold that can be repaired and/or re-touched throughout repetative production of parts from the mold.

the gelcoats used on production parts are a bit harder and generally thinner as a means of a smooth surface finish that can just be scuffed and cleaned with wax-remover for primer/paint. If not for gelcoat the surface of a fiberglass part would require a TON of contour sanding and labor just to get it to a point where it could be painted.

---------- Post added at 12:42 PM ---------- Previous post was at 12:30 PM ----------

FYI, I’m always willing to show somebody else how I do this stuff…it can even be a benefit to me because having a second set of hands to help lay down pieces of fiberglass while I wet it out is a majorly huge help…which is why 90% of the time either pirite or checko are involved in the process lol.

---

<div class="post-metadata">

**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\
**Post date:** [March 11, 2013, 9:50am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/414 "2013-03-11T09:50:56Z")

</div>

so it just goes over the fiberglass to make a smooth and tough skin. It can be painted, tinted, or left raw. can you sand it or does that break the seal?

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 11, 2013, 9:53am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/415 "2013-03-11T09:53:47Z")

</div>

> [@theblue](#):
>
> so it just goes over the fiberglass to make a smooth and tough skin. It can be painted, tinted, or left raw. can you sand it or does that break the seal?

it can be sanded, and generally is. It’s usually the first thing to go down, not last…as most molds are constructed to be of the female type, you first put down the gelcoat, then fiberglass over it…when you remove the part, the gelcoat is the exact male counter-part to the mold and can just be trimmed, sanded, cleaned, and painted.

---

<div class="post-metadata">

**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\
**Post date:** [March 11, 2013, 10:00am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/416 "2013-03-11T10:00:43Z")

</div>

cool info. how do you stop the gel coat from sticking to the mold?

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 11, 2013, 11:36am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/417 "2013-03-11T11:36:46Z")

</div>

> [@theblue](#):
>
> cool info. how do you stop the gel coat from sticking to the mold?

I apply a paste wax to the mold and then lighly hand-buff…once that hazes/dries I apply a mold release agent using a harbor freight $14 HVLP spray gun…it’s similar to a quick-wax product like McGuires and the like (which I have used successfully on smaller lay-ups in a pinch to avoid running the compressor and whatnot). after the mold release is dry you lay down your gelcoat, wait about 15-20mins for that to start setting up/hardening and get to laying down matt/resin and wetting that out. You only get like a 20-30min window once the gelcoat starts hardening up before it won’t laminate to fiberglass…and then when you pull out your part the gelcoat just falls off like old wallpaper

---

<div class="post-metadata">

**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\
**Post date:** [March 11, 2013, 11:46am UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/418 "2013-03-11T11:46:06Z")

</div>

nice… thanks for sharing.

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 22, 2013, 8:27pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/419 "2013-03-22T20:27:31Z")

</div>

mini project: got the quarter panel rub strips shaped up and ready for some high-build…Didn’t have any adhesion promoter around so decided to spray with krylon fusion I had sitting around…going to wetsand again after it dries and spray down with filler primer (probably tomorrow)

used the driver-side that I already cut to shape as a template for the passenger side, then filled in the spots where I broke into the voids in the casting and wetsanded in 320

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224040_zps798d666b.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224040_zps798d666b.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224028_zpsda8f56a6.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224028_zpsda8f56a6.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224015_zpsf5463024.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224015_zpsf5463024.jpg)

then sprayed with the krylon fusion

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224808_zps555d26ff.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224808_zps555d26ff.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224835_zps052fbf64.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224835_zps052fbf64.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224844_zps78bd1e35.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-22224844_zps78bd1e35.jpg)

for anyone unfamilier, these started out life as the rear rubstrips from a 4dr sedan focus…I cut them to fit the RS quarterpanel. I don’t know how the “plastic weld” epoxy will hold up long-term…so I might buy casting urethane to make flexible molds of these and make solid ones from two-part urethane mix (and then sell replicas LOL)

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 22, 2013, 9:19pm UTC](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439/420 "2013-03-22T21:19:52Z")

</div>

Just brought them in…I couldn’t get all of the scratches totally out pre-paint because of how soft the urethane is once you’re through the paint…so I’ll let these cure more over night and wetsand them with 400 and filler-prime them and repeat until smooth/perfect.

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-23000548_zps551daec3.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-23000548_zps551daec3.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-23000300_zpsad474501.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-23000300_zpsad474501.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-23000233_zps17a9ae65.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-23000233_zps17a9ae65.jpg)

 ![http://img.photobucket.com/albums/v112/focusinprogress/2013-03-23000522_zpscb85a1dc.jpg](http://img.photobucket.com/albums/v112/focusinprogress/2013-03-23000522_zpscb85a1dc.jpg)

[Previous page](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439.md?page=20)

[Next page](https://forums.speedlife.net/t/converted-my-focus-svt-into-an-rs/223439.md?page=22)
