# Coolant return/feed line fittings for t25.

**URL:** https://forums.speedlife.net/t/coolant-return-feed-line-fittings-for-t25/126131
**Category:** SON240sx Automotive
**Created:** [July 9, 2009, 11:19pm UTC](https://forums.speedlife.net/t/coolant-return-feed-line-fittings-for-t25/126131 "2009-07-09T23:19:40Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![nigelsenchez](https://avatars.discourse-cdn.com/v4/letter/n/77aa72/32.png) [@nigelsenchez](https://forums.speedlife.net/u/nigelsenchez)
#### Post date: [July 9, 2009, 11:19pm UTC](https://forums.speedlife.net/t/coolant-return-feed-line-fittings-for-t25/126131/1 "2009-07-09T23:19:40Z")

</div>

Would any one recommend a place that sells these fittings. I would prefer to pick them up locally.

14mm Banjo to 1/4 NPT

1/4" NPT to 5/16

I am trying to replicate this setup for the coolant return/feed line. I already have the oil stuff covered.

[http://www.sr20-forum.com/240sx/3102-oil-coolant-feed-return-line-ka24det.html](http://www.sr20-forum.com/240sx/3102-oil-coolant-feed-return-line-ka24det.html)

If you feel there is a safer/cheaper/more effective way to set this up on a ka24de please comment. Thank you.

---

<div class="post-metadata">

### Author: ![rex\_thugs](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rex_thugs/32/5598_2.png) [@rex\_thugs](https://forums.speedlife.net/u/rex_thugs)
#### Post date: [July 10, 2009, 9:21am UTC](https://forums.speedlife.net/t/coolant-return-feed-line-fittings-for-t25/126131/2 "2009-07-10T09:21:25Z")

</div>

couldnt you just use the banjo off the original lines cut it and flare the end so the pipe cant slide off. i think its a safe way to go aslong as u flare the ends.

---

<div class="post-metadata">

### Author: ![nigelsenchez](https://avatars.discourse-cdn.com/v4/letter/n/77aa72/32.png) [@nigelsenchez](https://forums.speedlife.net/u/nigelsenchez)
#### Post date: [July 10, 2009, 12:45pm UTC](https://forums.speedlife.net/t/coolant-return-feed-line-fittings-for-t25/126131/3 "2009-07-10T12:45:04Z")

</div>

I probably could but the turbo i bought didn’t come with banjo fittings.

---

<div class="post-metadata">

### Author: ![minimum](https://avatars.discourse-cdn.com/v4/letter/m/e47774/32.png) [@minimum](https://forums.speedlife.net/u/minimum)
#### Post date: [July 10, 2009, 2:31pm UTC](https://forums.speedlife.net/t/coolant-return-feed-line-fittings-for-t25/126131/4 "2009-07-10T14:31:00Z")

</div>

try a local hydraulic shop like motion or paca.

---

<div class="post-metadata">

### Author: ![nigelsenchez](https://avatars.discourse-cdn.com/v4/letter/n/77aa72/32.png) [@nigelsenchez](https://forums.speedlife.net/u/nigelsenchez)
#### Post date: [July 10, 2009, 2:57pm UTC](https://forums.speedlife.net/t/coolant-return-feed-line-fittings-for-t25/126131/5 "2009-07-10T14:57:10Z")

</div>

Thanks for the info, i will give them a try.

---

<div class="post-metadata">

### Author: ![jeff93eg](https://avatars.discourse-cdn.com/v4/letter/j/58956e/32.png) [@jeff93eg](https://forums.speedlife.net/u/jeff93eg)
#### Post date: [July 13, 2009, 3:09pm UTC](https://forums.speedlife.net/t/coolant-return-feed-line-fittings-for-t25/126131/6 "2009-07-13T15:09:23Z")

</div>

Brofasco (sp)