# Cooling panel! **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [November 29, 2006, 5:57pm UTC](https://forums.speedlife.net/t/cooling-panel/145211 "2006-11-29T17:57:53Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![bigmack000](https://avatars.discourse-cdn.com/v4/letter/b/6de8d8/32.png) [@bigmack000](https://forums.speedlife.net/u/bigmack000)\ **Post date:** [January 14, 2007, 9:31pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/61 "2007-01-14T21:31:41Z")
> [@DeathBy240](#): > > Still a good deal for people who don’t have access to that kind of stuff and wouldn’t have a clue how to make it. Believe it or not, not everyone in Alberta works in a machine shop. :lol: > > Still a lot less than paying for a brand name. I dont work in a machine shop either dave :lol: ---
**Author:** ![InitialD](https://avatars.discourse-cdn.com/v4/letter/i/d07c76/32.png) [@InitialD](https://forums.speedlife.net/u/InitialD)\ **Post date:** [January 15, 2007, 6:47pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/62 "2007-01-15T18:47:17Z")
i have to put this mod on freeze for 3 weeks. just heads up. still getting it though. ---
**Author:** ![Slide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slide/32/3301_2.png) [@Slide](https://forums.speedlife.net/u/Slide)\ **Post date:** [January 16, 2007, 7:29am UTC](https://forums.speedlife.net/t/cooling-panel/145211/63 "2007-01-16T07:29:37Z")
I am going to install it so it cools… ---
**Author:** ![usdm.s13](https://avatars.discourse-cdn.com/v4/letter/u/9e8a1a/32.png) [@usdm.s13](https://forums.speedlife.net/u/usdm.s13)\ **Post date:** [January 16, 2007, 10:24am UTC](https://forums.speedlife.net/t/cooling-panel/145211/64 "2007-01-16T10:24:02Z")
Forget it I won’t bother. ---
**Author:** ![Slide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slide/32/3301_2.png) [@Slide](https://forums.speedlife.net/u/Slide)\ **Post date:** [January 16, 2007, 10:35am UTC](https://forums.speedlife.net/t/cooling-panel/145211/65 "2007-01-16T10:35:18Z")
bahahaha badunno, I wouldnt paint it, its the jdm bling factor. ---
**Author:** ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)\ **Post date:** [January 17, 2007, 4:07am UTC](https://forums.speedlife.net/t/cooling-panel/145211/66 "2007-01-17T04:07:41Z")
> [@bigmack000](#): > > [quote=DeathBy240]Still a good deal for people who don’t have access to that kind of stuff and wouldn’t have a clue how to make it. Believe it or not, not everyone in Alberta works in a machine shop. :lol: > > Still a lot less than paying for a brand name. I dont work in a machine shop either dave :lol:[/quote] Machine shops don’t make sheet metal parts believe it or not. and it took alot more than 10 minutes to make these. It took rob a couple hours to mock it all up then a couple hours to draw it and cut the first one. Now it doesnt take much time but ya it is worth the money. Haha machine shop 😛 ---
**Author:** ![Slide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slide/32/3301_2.png) [@Slide](https://forums.speedlife.net/u/Slide)\ **Post date:** [January 17, 2007, 7:46am UTC](https://forums.speedlife.net/t/cooling-panel/145211/67 "2007-01-17T07:46:49Z")
now it should take him couple of hours to send them over here with greyhound. We are still waiting. ---
**Author:** ![DeathBy240](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@DeathBy240](https://forums.speedlife.net/u/DeathBy240)\ **Post date:** [January 17, 2007, 7:50am UTC](https://forums.speedlife.net/t/cooling-panel/145211/68 "2007-01-17T07:50:11Z")
> [@Slide](#): > > now it should take him couple of hours to send them over here with greyhound. We are still waiting. Werd. And machine shop, metal shop, whatever. The only thing metal I work with is staples and paper clips. ---
**Author:** ![silvia\_sr20det\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)\ **Post date:** [January 17, 2007, 4:17pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/69 "2007-01-17T16:17:55Z")
hey guys…i have been wiating for the other people to pay but they obviusly dont want this…i have shipped these to the people that have paid as of TODAY at 4:30 so expect them tomorrow or friday 🙂 sorry for the delays but i offered the price you guys paid if EVERYONE paid me!! but whatever let me know how they work, these are the very first ones i have sold so if any problems you guys let me know 🙂 ---
**Author:** ![silvia\_sr20det\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)\ **Post date:** [January 17, 2007, 4:22pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/70 "2007-01-17T16:22:15Z")
> [@bigmack000](#): > > wow your Deff making money off these. for 7 mins of work 😛 7 mins of work? ok man lets see you get this made FROM scratch in seven minutes…also #4 finish stainless steel is not very cheap and plus the gas used on the cnc plasma costs money to…i am making money yes but you have to factor in the amount of time i spent drawing it and etc etc! ---
**Author:** ![silvia\_sr20det\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)\ **Post date:** [January 17, 2007, 4:23pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/71 "2007-01-17T16:23:50Z")
> [@bigmack000](#): > > [quote=Buddyworm][quote=bigmack000]wow your Deff making money off these. for 7 mins of work 😛 That’s kinda the point 😛 lol B-Wurm :D[/quote] yes on 50 dollar pieces of SS tin. that take under 10 mins to make . hell i should start making these .[/quote] better bust out your tin snips and get cutting unless you have a cnc turret press or cnc laser handy you wont get to far in ten mins! ---
**Author:** ![jdms13rhd](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jdms13rhd](https://forums.speedlife.net/u/jdms13rhd)\ **Post date:** [January 17, 2007, 4:37pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/72 "2007-01-17T16:37:23Z")
HAHAHA Ya Im with Rob on this one. Go ahead with the tin snip’s if you really want… Ive seen Robs in person and they are sexy and fit right!!! ---
**Author:** ![bigmack000](https://avatars.discourse-cdn.com/v4/letter/b/6de8d8/32.png) [@bigmack000](https://forums.speedlife.net/u/bigmack000)\ **Post date:** [January 17, 2007, 5:32pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/73 "2007-01-17T17:32:21Z")
I run a CNC plasma table . no tin snips needed here :E. if you have a 240 to measure from it shouldn’t take more then 15 mins to draw in auto cad and if you dont have auto cad take 20-35 mins to program in G code. So Yes after the initial Drawing I do have a very accurate idea of how long it takes to cut and i am being generous on how much time it takes to make. :finga: ---
**Author:** ![silvia\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@silvia\_s13](https://forums.speedlife.net/u/silvia_s13)\ **Post date:** [January 17, 2007, 6:03pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/74 "2007-01-17T18:03:30Z")
Can we get a cooling panel on this…You guys seem to be getting alittle hot in here. ---
**Author:** ![Last\_Fuse](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/last_fuse/32/5847_2.png) [@Last\_Fuse](https://forums.speedlife.net/u/Last_Fuse)\ **Post date:** [January 17, 2007, 6:20pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/75 "2007-01-17T18:20:01Z")
> [@silvia\_s13](#): > > Can we get a cooling panel on this…You guys seem to be getting alittle hot in here. Nice… ---
**Author:** ![silvia\_sr20det\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)\ **Post date:** [January 17, 2007, 6:43pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/76 "2007-01-17T18:43:52Z")
> [@bigmack000](#): > > I run a CNC plasma table . no tin snips needed here :E. if you have a 240 to measure from it shouldn’t take more then 15 mins to draw in auto cad and if you dont have auto cad take 20-35 mins to program in G code. > So Yes after the initial Drawing I do have a very accurate idea of how long it takes to cut and i am being generous on how much time it takes to make. :finga: liek mike said…cool it in here…thats great you can run a cnc plasma, so can i! so what your saying is you will get the panel made PERFECT the very first try you take a shot at it? it takes no longer then 30 seconds the cut the parts out and it took me about an hour to draw the panel in inventor…it dont take very long at all but man you are acting like a 2 year old coming into MY thread and saying your quite usless post about (wow your Deff making money off these. for 7 mins of work) well if i am making so much money and its such a good thing then why didnt you make it or try to make anything for the good people on this forum? oh thats right its to easy to do so i guess i wont do it at all! jesus christ why is it that everyone on the net thinks they are better then someone else! STOP with the fucking useless posts and go make them somewhere else. thanks! ---
**Author:** ![DeathBy240](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@DeathBy240](https://forums.speedlife.net/u/DeathBy240)\ **Post date:** [January 17, 2007, 6:56pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/77 "2007-01-17T18:56:34Z")
Shipped, thanks!! Can’t wait to get them. As for the Joel, don’t mind him. He’s just jealous that he isn’t making money. ---
**Author:** ![silvia\_sr20det\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)\ **Post date:** [January 17, 2007, 7:17pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/78 "2007-01-17T19:17:05Z")
it just kinda pisses me off sometimes when you work to make stuff and help people out and someone has to come along and be a dink! kinda pointless…i shipped the panels with the protective plastic still on so you will have to pull it off the reveal the finish! ---
**Author:** ![usdm.s13](https://avatars.discourse-cdn.com/v4/letter/u/9e8a1a/32.png) [@usdm.s13](https://forums.speedlife.net/u/usdm.s13)\ **Post date:** [January 17, 2007, 7:35pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/79 "2007-01-17T19:35:31Z")
Out of curiosity how many people actually ended up following through and paying for one of these? Cause there were something like 13 people on that list. ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [January 17, 2007, 7:36pm UTC](https://forums.speedlife.net/t/cooling-panel/145211/80 "2007-01-17T19:36:02Z")
Wow this is getting pretty good Anymore after this are getting deleted. No questions asked ![http://media.travelgolf.com/tg_blog_media/warning%20sign.jpg](http://media.travelgolf.com/tg_blog_media/warning%20sign.jpg) [Previous page](https://forums.speedlife.net/t/cooling-panel/145211.md?page=3) [Next page](https://forums.speedlife.net/t/cooling-panel/145211.md?page=5)