# Couple changes this year - update 2/21 w pics **URL:** \ **Category:** Builds\ **Created:** [January 18, 2010, 4:25pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357 "2010-01-18T16:25:56Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\ **Post date:** [January 18, 2010, 4:25pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/1 "2010-01-18T16:25:56Z")
dropped my tank cause it leaked, got a new one. swapped pumps from a 190 to a 255. made pickup to keep as much volume possible for feed and return line without over killing it. I want to keep a stock pump for a couple reasons. 1. clean install 2. barely any pump noise 3. works flawlessly 4. cheap it took a little futzin to get right but i have everything lined up and feels solid. Sorry for the pics, this camera was the best thing out, 5 years ago. lol. seems to focus good on everything but what i want it to Tomorrow morning ill go to Ferrys and get the two fittings that will connect the compression fitting to a -6 male so i can connect my fuel lines. removed old lines, drilled out holes ![http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs121.snc3/16866_255175070035_631645035_3342963_3098161_n.jpg](http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs121.snc3/16866_255175070035_631645035_3342963_3098161_n.jpg) ![http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175075035_631645035_3342964_5249282_n.jpg](http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175075035_631645035_3342964_5249282_n.jpg) made new lines ![http://hphotos-snc3.fbcdn.net/hs141.snc3/16866_255175085035_631645035_3342965_1176181_n.jpg](http://hphotos-snc3.fbcdn.net/hs141.snc3/16866_255175085035_631645035_3342965_1176181_n.jpg) started tacking together ![http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175095035_631645035_3342966_3793891_n.jpg](http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175095035_631645035_3342966_3793891_n.jpg) ![http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175105035_631645035_3342967_3259747_n.jpg](http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175105035_631645035_3342967_3259747_n.jpg) ![http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs121.snc3/16866_255175125035_631645035_3342969_6601394_n.jpg](http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs121.snc3/16866_255175125035_631645035_3342969_6601394_n.jpg) Got Flow? ![http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175135035_631645035_3342971_1993425_n.jpg](http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175135035_631645035_3342971_1993425_n.jpg) Together ![http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175145035_631645035_3342972_2146970_n.jpg](http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs141.snc3/16866_255175145035_631645035_3342972_2146970_n.jpg) ![http://hphotos-snc3.fbcdn.net/hs141.snc3/16866_255175150035_631645035_3342973_431613_n.jpg](http://hphotos-snc3.fbcdn.net/hs141.snc3/16866_255175150035_631645035_3342973_431613_n.jpg) dont worry about the connectors, they shouldnt touch :lol: I already got 500 bucks worth the fittings and lines from Ferrys, so now my car will be legit for tech. instead of 30 feet of rubber hose next will be fuel and trans lines. Also I had to pull the motor and tranny out in order to drop the gas tank… =]. As i keep doing things ill keep throwing up pics and little write ups ---
**Author:** ![Jack](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jack/32/7613_2.png) [@Jack](https://forums.speedlife.net/u/Jack)\ **Post date:** [January 18, 2010, 4:37pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/2 "2010-01-18T16:37:08Z")
Great pics of that pop can. Good job using the focus. lol. Good stuff:tup: ---
**Author:** ![psychopjv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psychopjv/32/7251_2.png) [@psychopjv](https://forums.speedlife.net/u/psychopjv)\ **Post date:** [January 18, 2010, 4:51pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/3 "2010-01-18T16:51:42Z")
nice!! Jack he is merely learning to not always use the subject as the focal point!!! ---
**Author:** ![Jack](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jack/32/7613_2.png) [@Jack](https://forums.speedlife.net/u/Jack)\ **Post date:** [January 18, 2010, 4:56pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/4 "2010-01-18T16:56:07Z")
haha… I know, it takes some “thinking out of the box” to take pictures of an old bath towel and random objects on the shelves in the background. lol BTW - D&W is doing all of the lines and fittings you could ever need, give them a call before you go to Ferry’s, I bet they will beat the prices. ---
**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\ **Post date:** [January 18, 2010, 5:10pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/5 "2010-01-18T17:10:32Z")
Mike and Justin at Ferrys hook me up ---
**Author:** ![nitroinsane](https://avatars.discourse-cdn.com/v4/letter/n/d26b3c/32.png) [@nitroinsane](https://forums.speedlife.net/u/nitroinsane)\ **Post date:** [January 18, 2010, 5:40pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/6 "2010-01-18T17:40:11Z")
Use macro setting on camera. ---
**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\ **Post date:** [January 18, 2010, 6:11pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/7 "2010-01-18T18:11:32Z")
plz use an insulated spade connector? pretty plz? ---
**Author:** ![FourEyed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foureyed/32/7216_2.png) [@FourEyed](https://forums.speedlife.net/u/FourEyed)\ **Post date:** [January 18, 2010, 7:40pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/8 "2010-01-18T19:40:48Z")
Nice :tup: good idea on those lines. It’s a lot better than buying the pre-made pump setup like that for $130. This car defies all logic with that fuel system lol. Did you solder those on? If you need something welded call me, I have been practicing a lot. ---
**Author:** ![LittleFoot](https://avatars.discourse-cdn.com/v4/letter/l/e9a140/32.png) [@LittleFoot](https://forums.speedlife.net/u/LittleFoot)\ **Post date:** [January 18, 2010, 7:50pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/9 "2010-01-18T19:50:30Z")
:tup: Nice ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [January 18, 2010, 8:06pm UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/10 "2010-01-18T20:06:05Z")
I have always wondered, how do welds hold up when exposed to gas? will it rust faster than normal? etc… ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 19, 2010, 7:17am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/11 "2010-01-19T07:17:51Z")
Nice JT, i started tearing into my wiring harness last night…i have sooo many more wires than you! haha btw the headers came out sick ---
**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\ **Post date:** [January 19, 2010, 8:47am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/12 "2010-01-19T08:47:12Z")
> [@FourEyed](#): > > Nice :tup: good idea on those lines. It’s a lot better than buying the pre-made pump setup like that for $130. This car defies all logic with that fuel system lol. Did you solder those on? If you need something welded call me, I have been practicing a lot. i might just call ya ---
**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\ **Post date:** [January 23, 2010, 6:19am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/13 "2010-01-23T06:19:56Z")
heading back out today, ill get some more pics of whats going on ---
**Author:** ![challengermike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/challengermike/32/5106_2.png) [@challengermike](https://forums.speedlife.net/u/challengermike)\ **Post date:** [January 23, 2010, 6:56am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/14 "2010-01-23T06:56:23Z")
Im guessing your going with a warlbro 255? I just wanted to let you know that the warlbro for the turbo buicks arent lasting very long,they have had alot of them failing within 1 yr,may not apply to the ford ones.Alot of people are going with the denso toyota supra twinturbo pumps instead. ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [January 23, 2010, 7:00am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/15 "2010-01-23T07:00:18Z")
I have never heard of a Ford warlbro failing. Get some more pics JT, if you’re going to the banquet tonight i’ll see ya there ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [January 23, 2010, 7:00am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/16 "2010-01-23T07:00:42Z")
Nice work man, but I’d definitely do something to insulate those connectors… that would make me uneasy, lol. ---
**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\ **Post date:** [January 25, 2010, 6:06am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/17 "2010-01-25T06:06:02Z")
> [@Onyx Z32](#): > > Nice work man, but I’d definitely do something to insulate those connectors… that would make me uneasy, lol. … you rode in the car how many times so far… ;)what u dont know wont kill u. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [January 25, 2010, 6:14am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/18 "2010-01-25T06:14:15Z")
There is no way you’re leaving those connectors like that, lol. But you guys don’t know shit about PITA wiring: ![http://onyxsyndicate.com/newman/e30gtr/img/mess.jpg](http://onyxsyndicate.com/newman/e30gtr/img/mess.jpg) The only factory wiring is the 6" or so that I used on the factory plugs. ---
**Author:** ![psphinx81](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@psphinx81](https://forums.speedlife.net/u/psphinx81)\ **Post date:** [January 25, 2010, 6:15am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/19 "2010-01-25T06:15:49Z")
LOL wow! ---
**Author:** ![Xander](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xander/32/7597_2.png) [@Xander](https://forums.speedlife.net/u/Xander)\ **Post date:** [January 25, 2010, 6:57am UTC](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357/20 "2010-01-25T06:57:25Z")
> [@newman](#): > > There is no way you’re leaving those connectors like that, lol. > > But you guys don’t know shit about PITA wiring: > > The only factory wiring is the 6" or so that I used on the factory plugs. There’s a one-upper in every thread!! 😃 X… [Next page](https://forums.speedlife.net/t/couple-changes-this-year-update-2-21-w-pics/78357.md?page=2)