# Couple issues with my s14 HELP ME OUT! **URL:** \ **Category:** SON240sx Automotive\ **Created:** [April 25, 2013, 8:31pm UTC](https://forums.speedlife.net/t/couple-issues-with-my-s14-help-me-out/230220 "2013-04-25T20:31:13Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Schaz](https://avatars.discourse-cdn.com/v4/letter/s/ad7895/32.png) [@Schaz](https://forums.speedlife.net/u/Schaz)\ **Post date:** [April 25, 2013, 8:31pm UTC](https://forums.speedlife.net/t/couple-issues-with-my-s14-help-me-out/230220/1 "2013-04-25T20:31:13Z")
I have noticed these items as of late which are bothering me… First off, when i am driving and I hit a bump my car will hesitate/shutter for 1-2 seconds then go back to normal I have tried seafoam, and injector cleaner but still the same issue. I have no idea what it is, I have also replaced the battery and alternator as well. the 2nd thing is that even with my key off I can still turn on my windshield wipers, I have not noticed it before…Is that normal? Thanks in advance for any information provided. -Greg ---
**Author:** ![Bk-87](https://avatars.discourse-cdn.com/v4/letter/b/2acd7d/32.png) [@Bk-87](https://forums.speedlife.net/u/Bk-87)\ **Post date:** [April 26, 2013, 12:07am UTC](https://forums.speedlife.net/t/couple-issues-with-my-s14-help-me-out/230220/2 "2013-04-26T00:07:30Z")
loose conection somewhere im quessing, go threw the maf, cas, and injectors pins to see if somthing is shaking around. if its happening only when you hit a bump try and shake around the wiring around those items on idle and see if it does the same effect. i dont believe seaform or the injector cleaner is gunna help the problem here. but anything is possible. ---
**Author:** ![\_kris](https://avatars.discourse-cdn.com/v4/letter/_/858c86/32.png) [@\_kris](https://forums.speedlife.net/u/_kris)\ **Post date:** [April 26, 2013, 10:21am UTC](https://forums.speedlife.net/t/couple-issues-with-my-s14-help-me-out/230220/3 "2013-04-26T10:21:45Z")
Sr or ka? ---
**Author:** ![Schaz](https://avatars.discourse-cdn.com/v4/letter/s/ad7895/32.png) [@Schaz](https://forums.speedlife.net/u/Schaz)\ **Post date:** [April 26, 2013, 12:50pm UTC](https://forums.speedlife.net/t/couple-issues-with-my-s14-help-me-out/230220/4 "2013-04-26T12:50:51Z")
Ka24de ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [April 26, 2013, 7:53pm UTC](https://forums.speedlife.net/t/couple-issues-with-my-s14-help-me-out/230220/5 "2013-04-26T19:53:17Z")
Lower your car? Check the wireharness’ in the wheel wells. Check them, check them again ---
**Author:** ![Schaz](https://avatars.discourse-cdn.com/v4/letter/s/ad7895/32.png) [@Schaz](https://forums.speedlife.net/u/Schaz)\ **Post date:** [April 30, 2013, 7:42pm UTC](https://forums.speedlife.net/t/couple-issues-with-my-s14-help-me-out/230220/6 "2013-04-30T19:42:34Z")
It is lowered on 350z rims, I was wondering since the tires did cut a hole in the inner wheel well, whats the easiest way to patch that? thin rubber and adhesive? ---
**Author:** ![conky](https://avatars.discourse-cdn.com/v4/letter/c/41988e/32.png) [@conky](https://forums.speedlife.net/u/conky)\ **Post date:** [May 1, 2013, 6:52am UTC](https://forums.speedlife.net/t/couple-issues-with-my-s14-help-me-out/230220/7 "2013-05-01T06:52:20Z")
I had a similar issue with my S14 back when it had a KA. Turns out a wire separated inside the factory rubber sheilded coating. Car would only act up during turns or bumps. Car was bone stock. I found it by letting the car idle and played with the wireing harness. Give it a slight tug at each connector, and pull and push on the factory loom through out. Dont be rough!! Wheel well was also a culprit for me. Shorted out my horn and the car wouldn’t stop honking. Really pissed some people off that day… Tuck the harness!!!good luck