# Crank Rear Oil Seal Tool **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [March 27, 2006, 6:26pm UTC](https://forums.speedlife.net/t/crank-rear-oil-seal-tool/181287 "2006-03-27T18:26:25Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [March 27, 2006, 6:26pm UTC](https://forums.speedlife.net/t/crank-rear-oil-seal-tool/181287/1 "2006-03-27T18:26:25Z")
Long shot, but anyone happen to have access to the tool for pressing in an LT1 crankshaft rear oil seal (J 35621)? If not, I’ll just use some 4" PVC pipe, a block of wood, and a mallett. ---
**Author:** ![KeithO](https://avatars.discourse-cdn.com/v4/letter/k/4bbf92/32.png) [@KeithO](https://forums.speedlife.net/u/KeithO)\ **Post date:** [March 28, 2006, 2:59am UTC](https://forums.speedlife.net/t/crank-rear-oil-seal-tool/181287/2 "2006-03-28T02:59:10Z")
I don’t have one but would have lent it to you if I did… Your alternate method will work fine, but you might be surprised at the selection of specialty tools at your local NASA/Advance/Pep Boys, etc. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [March 28, 2006, 4:08am UTC](https://forums.speedlife.net/t/crank-rear-oil-seal-tool/181287/3 "2006-03-28T04:08:21Z")
use plane B or i’ll get it from the gm garage for u! ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [March 28, 2006, 4:34am UTC](https://forums.speedlife.net/t/crank-rear-oil-seal-tool/181287/4 "2006-03-28T04:34:18Z")
Plan B it is.