# Crazyz250's Boosted 30r prelude

**URL:** https://forums.speedlife.net/t/crazyz250s-boosted-30r-prelude/247402
**Category:** Builds
**Created:** [October 7, 2009, 1:25pm UTC](https://forums.speedlife.net/t/crazyz250s-boosted-30r-prelude/247402 "2009-10-07T13:25:19Z")
**Posts on this page:** 1
**Showing post:** 160

<div class="post-metadata">

### Author: ![crazyz250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crazyz250/32/6352_2.png) [@crazyz250](https://forums.speedlife.net/u/crazyz250)
#### Post date: [January 7, 2010, 8:42pm UTC](https://forums.speedlife.net/t/crazyz250s-boosted-30r-prelude/247402/160 "2010-01-07T20:42:31Z")

</div>

> [@:tdown: to Mike Smith GMC/Buick/Pontiac](https://forums.speedlife.net/t/tdown-to-mike-smith-gmc-buick-pontiac/28128/11):
>
> There’s flat spots on the insides of the wheel wells. It’s hard to describe but you’ll see them if you look. Drill through there to the inside of the car and route the lines through there using bulkhead fittings. And there are several people who have entire braided systems. Just make sure you are using specialty brake line.

Yeah im going to do my research before i buy any lines. Thanks for the pic i kno exactly what im going to do now.

stallmer i pwashed and degreased everything back in the fall when it was still warm out. I then used a wire brush/wheel over everything i could get at. Let it sit in front of my heater for about an hr then two coats primer two coats base like 5 coats clear haha. All dupli-color high temp paint. Spent about $25 on the paint. I hope it lasts but if it chips off or something i wont be pissed. When i build the motor im powder coating the whole fucking thing.

and adam I’v been looking at it for a few days and finally got to see it today. Got a smokin deal on it! couldn’t pass it up. I pick it up monday.

---

_[View the full topic](https://forums.speedlife.net/t/crazyz250s-boosted-30r-prelude/247402)._