# Creo Schematic/Cabling

**URL:** <https://forums.speedlife.net/t/creo-schematic-cabling/218989>\
**Category:** NYSpeed Off Topic\
**Created:** [December 8, 2011, 6:16pm UTC](https://forums.speedlife.net/t/creo-schematic-cabling/218989 "2011-12-08T18:16:23Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\
**Post date:** [December 8, 2011, 6:16pm UTC](https://forums.speedlife.net/t/creo-schematic-cabling/218989/1 "2011-12-08T18:16:23Z")

</div>

Does anyone use these programs? I have to model the harness in our car along with make a schematic. I just got Creo Schematic and no one knows how to use it. PTC University is about worthless too. I have a schematic drawn in tiny cad but I’d really like to see a schematic and model that communicate and just work better than the freeware versions. I imagine proE offers a great solution but with all of their programs the learning curve is steep as hell.

I’ve done a couple of the tutorials but nothing really helps you get started from scratch.

Does anyone have any experience with this?

This is a little old but it’s close:  
 ![http://img502.imageshack.us/img502/9999/f20masterschematic.png](http://img502.imageshack.us/img502/9999/f20masterschematic.png)

---

<div class="post-metadata">

**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\
**Post date:** [December 23, 2011, 10:07am UTC](https://forums.speedlife.net/t/creo-schematic-cabling/218989/2 "2011-12-23T10:07:59Z")

</div>

Bump. No one here uses these? Cmon

---

<div class="post-metadata">

**Author:** ![yunvme666](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yunvme666/32/5065_2.png) [@yunvme666](https://forums.speedlife.net/u/yunvme666)\
**Post date:** [December 23, 2011, 11:20am UTC](https://forums.speedlife.net/t/creo-schematic-cabling/218989/3 "2011-12-23T11:20:09Z")

</div>

i had something i was making harness diagrams on, it has symbols for components, and you can make plugs and all that shit. its close to what you posted but i cant remember the name, it was on my old laptop… i tried smartdraw too but i didnt like the layout and you couldnt make the connectors

---

<div class="post-metadata">

**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\
**Post date:** [December 23, 2011, 11:44am UTC](https://forums.speedlife.net/t/creo-schematic-cabling/218989/4 "2011-12-23T11:44:55Z")

</div>

I (obviously) have a program that works for making a schematic but I am trying to use the proE version. That is what the chassis is made in so the hope is to be able to route the harness correctly and create ‘prints’ to have the harness complete before the chassis is done.

---

<div class="post-metadata">

**Author:** ![yunvme666](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yunvme666/32/5065_2.png) [@yunvme666](https://forums.speedlife.net/u/yunvme666)\
**Post date:** [December 23, 2011, 11:49am UTC](https://forums.speedlife.net/t/creo-schematic-cabling/218989/5 "2011-12-23T11:49:35Z")

</div>

oh no i get ya, im just curious to see other programs that could make it easier… now i look at creo, is it like solidworks and also does wiring?

---

<div class="post-metadata">

**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\
**Post date:** [December 23, 2011, 12:29pm UTC](https://forums.speedlife.net/t/creo-schematic-cabling/218989/6 "2011-12-23T12:29:19Z")

</div>

Yea, kinda sorta. It’s a pain in the dick but works well when used properly.

---

<div class="post-metadata">

**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\
**Post date:** [January 14, 2012, 7:47am UTC](https://forums.speedlife.net/t/creo-schematic-cabling/218989/7 "2012-01-14T07:47:32Z")

</div>

Bump. updated tiny cad file:

![http://img694.imageshack.us/img694/1474/f20masterschematicrev3.png](http://img694.imageshack.us/img694/1474/f20masterschematicrev3.png)

full size:[http://img694.imageshack.us/img694/1474/f20masterschematicrev3.png](http://img694.imageshack.us/img694/1474/f20masterschematicrev3.png)