# Crush washers..
**URL:** https://forums.speedlife.net/t/crush-washers/242665
**Category:** Shift518 Automotive
**Created:** [March 9, 2009, 1:42pm UTC](https://forums.speedlife.net/t/crush-washers/242665 "2009-03-09T13:42:18Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [March 9, 2009, 1:42pm UTC](https://forums.speedlife.net/t/crush-washers/242665/1 "2009-03-09T13:42:18Z")
Seriously I looked all over the area today to look for a god damn crush washer for my turbo oil feed line. Not one damn place had one of the right size… anyone have any ideas where I can get a couple?
Or if anyone on here has some that might work.
I really dont want to order 2 dollars worth of crushwashers and then have to pay 10 shipping from a dealer…
---
### Author:  [@big\_red](https://forums.speedlife.net/u/big_red)
#### Post date: [March 9, 2009, 1:44pm UTC](https://forums.speedlife.net/t/crush-washers/242665/2 "2009-03-09T13:44:57Z")
> [@7/30 autocross eccn](https://forums.speedlife.net/t/7-30-autocross-eccn/15061/70):
>
> Seriously I looked all over the area today to look for a god damn crush washer for my turbo oil feed line. Not one damn place had one of the right size… anyone have any ideas where I can get a couple?
>
> Or if anyone on here has some that might work.
>
> I really dont want to order 2 dollars worth of crushwashers and then have to pay 10 shipping from a dealer…
shako
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [March 9, 2009, 1:47pm UTC](https://forums.speedlife.net/t/crush-washers/242665/3 "2009-03-09T13:47:05Z")
> [@Audio folks](https://forums.speedlife.net/t/audio-folks/15231/13):
>
> shako
+1.
---
### Author:  [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [March 9, 2009, 1:54pm UTC](https://forums.speedlife.net/t/crush-washers/242665/4 "2009-03-09T13:54:57Z")
> [@7/30 autocross eccn](https://forums.speedlife.net/t/7-30-autocross-eccn/15061/70):
>
> Seriously I looked all over the area today to look for a god damn crush washer for my turbo oil feed line. Not one damn place had one of the right size… anyone have any ideas where I can get a couple?
>
> Or if anyone on here has some that might work.
>
> I really dont want to order 2 dollars worth of crushwashers and then have to pay 10 shipping from a dealer…
Napa, or I think Harbor Freight might sell a kit with a bunch of different sizes.
---
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [March 9, 2009, 2:11pm UTC](https://forums.speedlife.net/t/crush-washers/242665/5 "2009-03-09T14:11:26Z")
> [@you all miss me and my car photoshoots](https://forums.speedlife.net/t/you-all-miss-me-and-my-car-photoshoots/15278/10):
>
> Napa, or I think Harbor Freight might sell a kit with a bunch of different sizes.
Dude I’ve been to every place
Advanced, Auto Zone, Napa, Fasten All, Ace hardware and no place has the damn things…
---
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [March 9, 2009, 2:12pm UTC](https://forums.speedlife.net/t/crush-washers/242665/6 "2009-03-09T14:12:01Z")
and wtf is Shako?
---
### Author:  [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)
#### Post date: [March 9, 2009, 2:12pm UTC](https://forums.speedlife.net/t/crush-washers/242665/7 "2009-03-09T14:12:04Z")
fastenal on Crane
---
### Author:  [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [March 9, 2009, 2:17pm UTC](https://forums.speedlife.net/t/crush-washers/242665/8 "2009-03-09T14:17:03Z")
[http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93324](http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93324)
try that
---
### Author:  [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [March 9, 2009, 2:18pm UTC](https://forums.speedlife.net/t/crush-washers/242665/9 "2009-03-09T14:18:08Z")
[http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=92352](http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=92352)
---
### Author:  [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)
#### Post date: [March 9, 2009, 2:18pm UTC](https://forums.speedlife.net/t/crush-washers/242665/10 "2009-03-09T14:18:35Z")
> [@Official NHL Offseason Thread](https://forums.speedlife.net/t/official-nhl-offseason-thread/14053/149):
>
> and wtf is Shako?
an aeroquip/earls dealer right by the latham circle… go through the circle towards rt2 to watervliet, its right on your right hand side.
---
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [March 9, 2009, 2:20pm UTC](https://forums.speedlife.net/t/crush-washers/242665/11 "2009-03-09T14:20:16Z")
> [@Thank you all.](https://forums.speedlife.net/t/thank-you-all/15092/44):
>
> an aeroquip/earls dealer right by the latham circle… go through the circle towards rt2 to watervliet, its right on your right hand side.
Sweet thanks broski
---
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [March 9, 2009, 2:20pm UTC](https://forums.speedlife.net/t/crush-washers/242665/12 "2009-03-09T14:20:50Z")
And thanks travis, looks ill be making a stop there when I get out of work tommorow
---
### Author:  [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [March 9, 2009, 2:26pm UTC](https://forums.speedlife.net/t/crush-washers/242665/13 "2009-03-09T14:26:49Z")
Worst case, I think you could make one with a couple correct size hole punches and a sheet of material. I’d just source the right ones, though.
---
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [March 9, 2009, 4:11pm UTC](https://forums.speedlife.net/t/crush-washers/242665/14 "2009-03-09T16:11:24Z")
> [@FS- 89 VW Cabrio -southern car- $2200](https://forums.speedlife.net/t/fs-89-vw-cabrio-southern-car-2200/15271/4):
>
> Worst case, I think you could make one with a couple correct size hole punches and a sheet of material. I’d just source the right ones, though.
yeah tru, but getting a copper washer should not be that fuckin difficult lol
---
### Author:  [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [March 9, 2009, 4:22pm UTC](https://forums.speedlife.net/t/crush-washers/242665/15 "2009-03-09T16:22:02Z")
If you can’t get one give me a shout. I have hundreds of various crush washers at my garage. I’m sure I could part with one 😉
---
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [March 9, 2009, 4:39pm UTC](https://forums.speedlife.net/t/crush-washers/242665/16 "2009-03-09T16:39:11Z")
> [@another boostedfoci to look out for](https://forums.speedlife.net/t/another-boostedfoci-to-look-out-for/15247/27):
>
> If you can’t get one give me a shout. I have hundreds of various crush washers at my garage. I’m sure I could part with one 😉
Acctualy I need two adam, and seriously I’d rahter just get a couple from you if I could rather than go buy an assortment of ones I don’t need…
Any chance you have 1/8th adapter fittings as well for an aftermarket oil pressure gauge…
As no one at any parts store around here grasps the concept of a female-\>male adapter fitting
The aftermarket uses a 1/8th something or other fitting versus the 1/8th NPT stock fitting
---
### Author:  [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)
#### Post date: [March 9, 2009, 5:14pm UTC](https://forums.speedlife.net/t/crush-washers/242665/17 "2009-03-09T17:14:37Z")
Dude I bought a couple of the assortment packs of copper crush washers from the Advance in Cobleskill, worked perfect for my Nissan :lol
---
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [March 9, 2009, 5:53pm UTC](https://forums.speedlife.net/t/crush-washers/242665/18 "2009-03-09T17:53:10Z")
> [@Remember the guy stroking it in the library?](https://forums.speedlife.net/t/remember-the-guy-stroking-it-in-the-library/15292/10):
>
> Dude I bought a couple of the assortment packs of copper crush washers from the Advance in Cobleskill, worked perfect for my Nissan :lol
im not spending like 8 bucks for 2 washers…
---
### Author:  [@big\_red](https://forums.speedlife.net/u/big_red)
#### Post date: [March 9, 2009, 6:49pm UTC](https://forums.speedlife.net/t/crush-washers/242665/19 "2009-03-09T18:49:52Z")
> [@Let's talk about Porsche baby](https://forums.speedlife.net/t/lets-talk-about-porsche-baby/15298/3):
>
> im not spending like 8 bucks for 2 washers…
dont cut corners on it, youll end up with car b que
---
### Author:  [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [March 9, 2009, 7:59pm UTC](https://forums.speedlife.net/t/crush-washers/242665/20 "2009-03-09T19:59:46Z")
Call me tomorrow on my cell and let me know what size washers you need. I’m certain to have them in stock, in either copper or magnesium.
What type of fitting do you need? I have lots of 1/8npt through 1/2npt stuff here, but I need to know exactly what you’re looking for.
Call the cell tomorrow, 225-8384
[Next page](https://forums.speedlife.net/t/crush-washers/242665.md?page=2)