# CRX PARTS, OBD0-OBD1 ECU JUMPER HARNESS, AND CLUTCH MASTERS LIGHTWEIGHT FLYWHEEL **URL:** \ **Category:** Classifieds\ **Created:** [December 2, 2009, 3:21pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816 "2009-12-02T15:21:53Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [December 2, 2009, 3:21pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/1 "2009-12-02T15:21:53Z")
**OBD0-OBD1 Jumper Harness $60** I ordered a harness from rywire and it goes right to the obd1 ecu plugs so im no longer in need of this _ **SOLD** _ **_DOHC ZC_** The motor runs strong. It has roughly 90,000 miles on it. Oil has been changed religiously every 3000 miles. It does burn a little bit of oil, but is perfect for those of who looking for a motor for your dd. It has a gunmetal powdercoated valve cover, will come with the mounts, shift linkage, and axles (axles and shift linkage are mint and do not have a speck of rust on them) THE WIRING HARNESS WILL NOT BE INCLUDED _ **$150** _ THIS IS JUST FOR THE MOTOR, there is no flywheel, pulley, transmission, or header It comes with the clutch if interested, i can make a package deal with any of the items listed below * * * **Clutch Masters Lightweight Flywheel** I dont have pictures of this yet,its a D series flywheel but its in mint condition and the price of this new was $425…$150 FIRM _ **SOLD** _ **Unorthadox Racing Lightweight Crank Pulley** In really good condition, no cracks, dings, etc…Listed on their website for just over $200 new I think, Im asking $80 ## _ **SOLD** _ **D Series 4-2-1 DC Sport Ceramic Coated Header** It came off of my zc swap and is in good condition. There are absolutly no dents whatsoever, but it does have a little bit of surface rust on the bottom half near where the cataletic converter is. Im asking $150 88-91 CRX PARTS: Stock 1990 CRX HF seats $40 for the pair - The driver side one has a rip in it but the passenger side one is pretty clean, these do come with the seat rails CRX Knuckles $15 - One has a good bearing the other one does not CRX/EF Brake Booster $15 ![http://i860.photobucket.com/albums/ab163/esford90/PC010241.jpg](http://i860.photobucket.com/albums/ab163/esford90/PC010241.jpg) Hood Latch cable $20 - Comes with hood release and handle Throttle Cable $10 ![http://i860.photobucket.com/albums/ab163/esford90/PC010231.jpg](http://i860.photobucket.com/albums/ab163/esford90/PC010231.jpg) E brake Handle $10 Clutch Cable $10 CRX Brake Prop. Valve $10 Speed Sensor Cable $10 ![http://i860.photobucket.com/albums/ab163/esford90/PC010227.jpg](http://i860.photobucket.com/albums/ab163/esford90/PC010227.jpg) Wheel Hubs $30 ![http://i860.photobucket.com/albums/ab163/esford90/PC010218.jpg](http://i860.photobucket.com/albums/ab163/esford90/PC010218.jpg) Gas Door/Hatch Cables $20 ![http://i860.photobucket.com/albums/ab163/esford90/PC010223.jpg](http://i860.photobucket.com/albums/ab163/esford90/PC010223.jpg) Pedal Assembly $30 - Comes with all sensors ![http://i860.photobucket.com/albums/ab163/esford90/PC010239.jpg](http://i860.photobucket.com/albums/ab163/esford90/PC010239.jpg) Gastank filler tube $10 ![http://i860.photobucket.com/albums/ab163/esford90/PC010236.jpg](http://i860.photobucket.com/albums/ab163/esford90/PC010236.jpg) CRX Rear bumper $20 ![http://i860.photobucket.com/albums/ab163/esford90/PC010254.jpg](http://i860.photobucket.com/albums/ab163/esford90/PC010254.jpg) B18A Block and crank $125 B18A Head $50 B18A Intake Mani COMPLETE with all sensors $20 OBD-1 Dizzy $50 \*\*\*SOLD\*\*\*Rear Divider With carpet $20 \*\*\*SOLD\*\*\*CRX Hatch $80 \*\*\*SOLD\*\*\*Cargo case behind seats $20 \*\*\*SOLD\*\*\*CRX Drivers side quarter panel 20 \*\*\*SOLD\*\*\*CRX Drivers side headlight 20 \*\*\*SOLD\*\*\*CRX Rear speaker covers CLEAN $15 \*\*\*SOLD\*\*\*Plastic around Radio $20 \*\*\*SOLD\*\*\*Pretty clean CRX dash $80 \*\*\*SOLD\*\*\*Taillights $20 \*\*\*SOLD\*\*\*CRX Neuspeed Tie Bar $30 \*\*\*SOLD\*\*\*CRX HF Headliner $15 \*\*\*SOLD\*\*\*CRX HF Cluster $20 ---
**Author:** ![FoxyHonda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foxyhonda/32/5425_2.png) [@FoxyHonda](https://forums.speedlife.net/u/FoxyHonda)\ **Post date:** [December 2, 2009, 3:34pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/2 "2009-12-02T15:34:03Z")
PM’d… thx! ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [December 2, 2009, 4:10pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/3 "2009-12-02T16:10:35Z")
Dash, Headliner, Tie Bar, and Taillights PENDING ---
**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\ **Post date:** [December 3, 2009, 4:57am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/4 "2009-12-03T04:57:42Z")
What year Crx is this stuff from, I’m guesssing a '90? > [@esford90"](#): > > CRX Hatch $80 - Complete with all glass and wiring for the rear defrost Wiper-less? ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [December 3, 2009, 8:41am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/5 "2009-12-03T08:41:20Z")
Correct, all of these parts are off a 1990, and yes the hatchback is wiperless ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [December 3, 2009, 4:31pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/6 "2009-12-03T16:31:26Z")
:bump: pics are up dash, tiebar, headliner, and taillights SOLD ---
**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\ **Post date:** [December 4, 2009, 4:35am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/7 "2009-12-04T04:35:23Z")
I assume you are located in or around Buffalo? ---
**Author:** ![Draftinwitjr3815](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/draftinwitjr3815/32/5349_2.png) [@Draftinwitjr3815](https://forums.speedlife.net/u/Draftinwitjr3815)\ **Post date:** [December 4, 2009, 5:05am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/8 "2009-12-04T05:05:21Z")
OP = Orchard Park = 15 minutes from Bflo. ---
**Author:** ![BadnewsMike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/badnewsmike/32/7419_2.png) [@BadnewsMike](https://forums.speedlife.net/u/BadnewsMike)\ **Post date:** [December 4, 2009, 5:05am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/9 "2009-12-04T05:05:28Z")
yes orchard park, ny ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [December 4, 2009, 9:42am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/10 "2009-12-04T09:42:31Z")
yeah 2 mins from chestnut ridge in orchard park ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [December 7, 2009, 11:31pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/11 "2009-12-07T23:31:41Z")
TTT ---
**Author:** ![psphinx81](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@psphinx81](https://forums.speedlife.net/u/psphinx81)\ **Post date:** [December 8, 2009, 3:52am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/12 "2009-12-08T03:52:24Z")
would that clutch cable work in a 87 crx si? ---
**Author:** ![laymone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laymone/32/48908_2.png) [@laymone](https://forums.speedlife.net/u/laymone)\ **Post date:** [December 8, 2009, 9:55am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/13 "2009-12-08T09:55:57Z")
Sell me he driver seat only. Putting the car back to stock. Pm me your number again or text me. Got ba new phone ---
**Author:** ![cfrat1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cfrat1/32/5315_2.png) [@cfrat1](https://forums.speedlife.net/u/cfrat1)\ **Post date:** [December 8, 2009, 11:56am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/14 "2009-12-08T11:56:50Z")
pm’ed ---
**Author:** ![psphinx81](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@psphinx81](https://forums.speedlife.net/u/psphinx81)\ **Post date:** [December 12, 2009, 4:48pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/15 "2009-12-12T16:48:38Z")
> [@psphinx81](#): > > would that clutch cable work in a 87 crx si? bump ---
**Author:** ![laymone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laymone/32/48908_2.png) [@laymone](https://forums.speedlife.net/u/laymone)\ **Post date:** [December 12, 2009, 8:38pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/16 "2009-12-12T20:38:11Z")
is the oem hood for sale? might be intrested in the brake prop. valve. ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [December 13, 2009, 7:06pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/17 "2009-12-13T19:06:18Z")
yes i do have it but idk if im selling the hood yet, ill let you know ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [December 13, 2009, 7:07pm UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/18 "2009-12-13T19:07:50Z")
> [@psphinx81](#): > > would that clutch cable work in a 87 crx si? im almost possitive it will work on an 87 but not 100% sure, sorry i didnt reply i havent been able to get on here in a while ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [December 17, 2009, 9:01am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/19 "2009-12-17T09:01:42Z")
bump ---
**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\ **Post date:** [December 17, 2009, 9:09am UTC](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816/20 "2009-12-17T09:09:01Z")
> [@esford90"](#): > > Rear Divider With carpet $20 > Cargo case behind seats $20 > CRX Hatch $80 - Complete with all glass and wiring for the rear defrost > CRX Drivers side quarter panel $20 - No Rust > CRX HF Cluster $20 > CRX Rear speaker covers CLEAN $15 > Plastic around Radio $20 Those items interest me. Any pics of the rear divider and cargo box? Any rust whatsoever on the rear hatch? If I were to come up, wouldn’t even think of making the trip until after the new year though. [Next page](https://forums.speedlife.net/t/crx-parts-obd0-obd1-ecu-jumper-harness-and-clutch-masters-lightweight-flywheel/76816.md?page=2)