# Custom 911 Exhaust **URL:** \ **Category:** Builds\ **Created:** [May 19, 2015, 6:38am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319 "2015-05-19T06:38:14Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\ **Post date:** [May 19, 2015, 3:48pm UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/21 "2015-05-19T15:48:02Z")
I dont like the look of it and the sound is meh especially when you slip the clutch for days going in to 2nd ---
**Author:** ![cretinx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cretinx/32/6121_2.png) [@cretinx](https://forums.speedlife.net/u/cretinx)\ **Post date:** [May 19, 2015, 5:46pm UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/22 "2015-05-19T17:46:18Z")
> [@newman](#): > > Looking at pictures of your old AL exhaust, it was insufficiently supported. I suspect the thermal effects could have been mitigated with proper support. > > If you were that concerned about weight, you could have used a short radius 180 bend at the top and eliminated a lot of pipe. Maybe you should have had a fabricator build your exhaust instead of Harry Potter. > > ![http://media.giphy.com/media/yt50itYQf9apy/giphy.gif](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/d/7/d76fef7d8773d59b2fc2a17f26fe544d938a47f7.gif) Take it up with Emery and STM. They built it. Please tell me more about the races you’ve won, season championships you’ve claimed and records you’ve set with your design and engineering. - - - Updated - - - > [@2TurboZ](#): > > I dont like the look of it and the sound is meh especially when you slip the clutch for days going in to 2nd I appreciate and value the opinion of such a decorated and accomplished driver as yourself. ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [May 19, 2015, 6:38pm UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/23 "2015-05-19T18:38:47Z")
If you like it who really cars. I don’t think it sounds that bad actually. I’m sure there are ways to make it even lighter if you’re obsessing over weight but that could be said about a lot of things. But Newman’s racing success is irrelevant since his design and engineering are arguably used in applications with much higher stakes. ---
**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\ **Post date:** [May 19, 2015, 7:57pm UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/24 "2015-05-19T19:57:14Z")
> [@cretinx](#): > > - > - > - Updated - - - > > I appreciate and value the opinion of such a decorated and accomplished driver as yourself. Oh, I am sorry I dont tool around cones in parking lots and call myself a driver. According to NYS and my insurance company, I am quite the accomplished driver. ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [May 19, 2015, 8:47pm UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/25 "2015-05-19T20:47:07Z")
what a shame, looks and sounds like shit… sorry i should be nice… looks great bud, cant believe it sounds that good 😉 ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [May 20, 2015, 5:19am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/26 "2015-05-20T05:19:14Z")
![http://media.giphy.com/media/GjYjLvGErsggg/giphy.gif](http://media.giphy.com/media/GjYjLvGErsggg/giphy.gif) ---
**Author:** ![Paul\_B](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/paul_b/32/5452_2.png) [@Paul\_B](https://forums.speedlife.net/u/Paul_B)\ **Post date:** [May 20, 2015, 5:23am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/27 "2015-05-20T05:23:15Z")
Much disappoint. Loving these comments though. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [May 20, 2015, 5:52am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/28 "2015-05-20T05:52:20Z")
> [@cretinx](#): > > Please tell me more about the races you’ve won, season championships you’ve claimed and records you’ve set with your design and engineering. WELL i DO LOVE TALKING ABOUT MYSELF… Here’s a just a simple idea that would have “saved weight”. Don’t even try and say the tight radius bend is going to have a greater flow restriction, because that resonator will be 1000 times worse. ![http://i.imgur.com/rnH0mdQ.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/2/1/2149b18636f4c8deb42670988ac1103544be9648.jpeg) It also would have looked a lot better than letting Pythagoras design your exhaust. ![http://gnosticwarrior.com/wp-content/uploads/2014/02/pythagoras-crete.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/b/c/bc90dbc4ca1cc2aaf7084e69d15f80e188499cdb.jpeg) ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [May 20, 2015, 6:06am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/29 "2015-05-20T06:06:58Z")
Best thread in a while :tup: ---
**Author:** ![fairgentleman\_Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fairgentleman_z/32/7263_2.png) [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)\ **Post date:** [May 20, 2015, 6:13am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/30 "2015-05-20T06:13:47Z")
> [@newman](#): > > Here’s a just a simple idea that would have “saved weight”. Don’t even try and say the tight radius bend is going to have a greater flow restriction, because that resonator will be 1000 times worse. > > ![http://i.imgur.com/rnH0mdQ.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/2/1/2149b18636f4c8deb42670988ac1103544be9648.jpeg) Why are you bothering to put anything in the rear fender area? Assuming you needed a “long” resonator and the left bank exits on the right side: ![http://i7.photobucket.com/albums/y293/jwashburn78/center%20muff%20delete_zps3eiqqi8x.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/4/f/4f90514d7e2cf8661b241177c2bf3713f6c16012.jpeg) Now if there was a stubby that could fit in there: ![http://i7.photobucket.com/albums/y293/jwashburn78/center%20muff%20delete_v2_zpslljqtbbo.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/7/4/747139f2081038327a2826532f6b49037fb3031e.jpeg) There could be a stupid rule that the “intent” of a replacement exhaust has to follow the same path as stock, which could be loosely interpreted as that the rear fender should be filled. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [May 20, 2015, 6:22am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/31 "2015-05-20T06:22:52Z")
> [@fairgentleman Z](#): > > Why are you bothering to put anything in the rear fender area? Honestly, I’ve never even seen the underside of a 911 before, but your idea looks good. I’m just seeing a major flaw in what’s shown of Merlin’s design whose only alleged constraint was “lightweight”. I guess when you take your car to a sorcerer, you’re really rolling the… 20 sided dice 🙂 ![https://s-media-cache-ak0.pinimg.com/736x/fb/16/c3/fb16c323753c9f2d2fe129ec1ae5073e.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/b/f/bf5e9168f945ba6f1698c14cbfdd825e3f5af9c2.jpeg) ---
**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\ **Post date:** [May 20, 2015, 6:25am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/32 "2015-05-20T06:25:06Z")
@**[newman](http://www.nyspeed.com/member.php?u=12)** @woz fuckin’ Merlin. ![http://i1023.photobucket.com/albums/af352/italiano1390/D5B99373-6F20-40E2-BD31-81F9FDCE317B_zpsf0bad3bu.png](http://i1023.photobucket.com/albums/af352/italiano1390/D5B99373-6F20-40E2-BD31-81F9FDCE317B_zpsf0bad3bu.png) ---
**Author:** ![fairgentleman\_Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fairgentleman_z/32/7263_2.png) [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)\ **Post date:** [May 20, 2015, 6:26am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/33 "2015-05-20T06:26:32Z")
> [@newman](#): > > Honestly, I’ve never even seen the underside of a 911 before, but your idea looks good. Neither had I until I thought I could show you up. BTW I had DJnick fab my first example. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [May 20, 2015, 6:28am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/34 "2015-05-20T06:28:11Z")
> [@fairgentleman Z](#): > > Neither had I until I thought I could show you up. Haha. I appreciate that. I’m mostly just here for the jokes, though. > [@fairgentleman Z](#): > > BTW I had DJnick fab my first example. The lime green hybrid connection doorstop? ---
**Author:** ![fairgentleman\_Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fairgentleman_z/32/7263_2.png) [@fairgentleman\_Z](https://forums.speedlife.net/u/fairgentleman_Z)\ **Post date:** [May 20, 2015, 6:37am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/35 "2015-05-20T06:37:03Z")
> [@newman](#): > > The lime green hybrid connection doorstop? I remember it as being like a pearly blue. - - - Updated - - - oh and here’s a picture of orko: ---
**Author:** ![King](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/king/32/7329_2.png) [@King](https://forums.speedlife.net/u/King)\ **Post date:** [May 20, 2015, 6:40am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/36 "2015-05-20T06:40:30Z")
I like this guy. Fuk all you guys. Who you think you phggts are…Give em hell cretnix > [@Onyx Z32](#): > > If you like it who really cars. after all…who _really_ ​cars? - - - Updated - - - I’m mirin your MSPaint drawings losers. why don’t you go draw up a cawk to fondle. This guys here to shave lbs, win world championships, and doesn’t have time to have his jimmies rustled by you clowns. ---
**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\ **Post date:** [May 20, 2015, 6:52am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/37 "2015-05-20T06:52:55Z")
granted i never looked into c2 exhaust but these designs are available for a turbo… fabspeed: ![http://cdn2.bigcommerce.com/server6100/fh9wsjv2/products/511/images/1414/996_Turbo_Muffler_Bypass_Exhaust_Product__14405.1405421289.1280.1280.jpg?c=2](http://cdn2.bigcommerce.com/server6100/fh9wsjv2/products/511/images/1414/996_Turbo_Muffler_Bypass_Exhaust_Product__14405.1405421289.1280.1280.jpg?c=2) speedtech: ![http://gallery.rennlist.com/albums/SpeedTech/996TT_X_Pipe_2_logo.sized.jpg](http://gallery.rennlist.com/albums/SpeedTech/996TT_X_Pipe_2_logo.sized.jpg) ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [May 20, 2015, 6:54am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/38 "2015-05-20T06:54:28Z")
@XwalkerX he needed to have mufflers though ---
**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\ **Post date:** [May 20, 2015, 6:57am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/39 "2015-05-20T06:57:39Z")
im sure a wizard could fab up a resonator section in that speedtech design ![http://24.media.tumblr.com/tumblr_mbn4zy6bsH1rdkgfqo1_500.gif](http://24.media.tumblr.com/tumblr_mbn4zy6bsH1rdkgfqo1_500.gif) ---
**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\ **Post date:** [May 20, 2015, 7:07am UTC](https://forums.speedlife.net/t/custom-911-exhaust/272319/40 "2015-05-20T07:07:45Z")
[https://youtu.be/bpgQSbwnWD0](https://youtu.be/bpgQSbwnWD0) NSFW - Language [Previous page](https://forums.speedlife.net/t/custom-911-exhaust/272319.md?page=1) [Next page](https://forums.speedlife.net/t/custom-911-exhaust/272319.md?page=3)