# cv axle opions EMPI?

**URL:** <https://forums.speedlife.net/t/cv-axle-opions-empi/261636>\
**Category:** Shift518 Automotive\
**Created:** [December 6, 2011, 12:35pm UTC](https://forums.speedlife.net/t/cv-axle-opions-empi/261636 "2011-12-06T12:35:19Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\
**Post date:** [December 6, 2011, 12:35pm UTC](https://forums.speedlife.net/t/cv-axle-opions-empi/261636/1 "2011-12-06T12:35:19Z")

</div>

Anyone used EMPI axles? according to rock auto i can get A-1 remans, APWI or EMPI. The vw guys have mixed feelings about them apparently but better than auto parts warehouse or a reman?

---

<div class="post-metadata">

**Author:** ![6SPD\_S4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/6spd_s4/32/6326_2.png) [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)\
**Post date:** [December 6, 2011, 1:12pm UTC](https://forums.speedlife.net/t/cv-axle-opions-empi/261636/2 "2011-12-06T13:12:42Z")

</div>

Just put two of them in my heap. Seem quality to me.

---

<div class="post-metadata">

**Author:** ![JVG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jvg/32/6348_2.png) [@JVG](https://forums.speedlife.net/u/JVG)\
**Post date:** [December 6, 2011, 2:25pm UTC](https://forums.speedlife.net/t/cv-axle-opions-empi/261636/3 "2011-12-06T14:25:49Z")

</div>

I have them in my audi 90 work fine. I usually have the oems rebuilt at xcel in schnectady.

---

<div class="post-metadata">

**Author:** ![SDP](https://avatars.discourse-cdn.com/v4/letter/s/e95f7d/32.png) [@SDP](https://forums.speedlife.net/u/SDP)\
**Post date:** [December 6, 2011, 2:44pm UTC](https://forums.speedlife.net/t/cv-axle-opions-empi/261636/4 "2011-12-06T14:44:15Z")

</div>

Run of the mill chinese axles…which means they can be ok or they can suck balls. Quality control and metallurgy consistency is always questionable.

---

<div class="post-metadata">

**Author:** ![6SPD\_S4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/6spd_s4/32/6326_2.png) [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)\
**Post date:** [December 6, 2011, 2:55pm UTC](https://forums.speedlife.net/t/cv-axle-opions-empi/261636/5 "2011-12-06T14:55:47Z")

</div>

Word. Work good on a slower than stock car ; )

---

<div class="post-metadata">

**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\
**Post date:** [December 6, 2011, 3:13pm UTC](https://forums.speedlife.net/t/cv-axle-opions-empi/261636/6 "2011-12-06T15:13:18Z")

</div>

I’ll give them a try. hopefully beter than what i got, xcel hard a hard time findin me cores to make my axles, came out kinda shitty , mad sloppy but they havnt broken yet…except one time but it was their fault apparently… Hopefully this companys not going to give me some bullshit that doesnt fit right.