# dash pad
**URL:** https://forums.speedlife.net/t/dash-pad/184100
**Category:** PittSpeed Automotive
**Created:** [August 8, 2006, 9:46am UTC](https://forums.speedlife.net/t/dash-pad/184100 "2006-08-08T09:46:30Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@subhumanzz](https://forums.speedlife.net/u/subhumanzz)
#### Post date: [August 8, 2006, 9:46am UTC](https://forums.speedlife.net/t/dash-pad/184100/1 "2006-08-08T09:46:30Z")
anyone know how to remove the dash pad to get access to the gauges to install white faces on a 94 camaro?❌
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [August 8, 2006, 10:22am UTC](https://forums.speedlife.net/t/dash-pad/184100/2 "2006-08-08T10:22:53Z")
just remove the two 7mm screws above the colum,than pop it out!
4, 7mm screws hold in the cluster remove & pull out!
---
### Author:  [@subhumanzz](https://forums.speedlife.net/u/subhumanzz)
#### Post date: [August 8, 2006, 10:31am UTC](https://forums.speedlife.net/t/dash-pad/184100/3 "2006-08-08T10:31:12Z")
i thought the pad itself was held in with a few plastic push in studs. then after the pad came off there were 2 7mm bolts to take out?
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [August 8, 2006, 11:13am UTC](https://forums.speedlife.net/t/dash-pad/184100/4 "2006-08-08T11:13:46Z")
than why u asking,u dont need to take off the pad,just the cluster cover
---
### Author:  [@subhumanzz](https://forums.speedlife.net/u/subhumanzz)
#### Post date: [August 8, 2006, 11:34am UTC](https://forums.speedlife.net/t/dash-pad/184100/5 "2006-08-08T11:34:50Z")
im asking because i didnt know of an easier way to do it. thanks for the help though.:bigok:
---
### Author:  [@HaLLaSS](https://forums.speedlife.net/u/HaLLaSS)
#### Post date: [August 8, 2006, 1:20pm UTC](https://forums.speedlife.net/t/dash-pad/184100/6 "2006-08-08T13:20:31Z")
white faced guages for tha muthafikin lose. fag.
---
### Author:  [@imported\_SINISTER](https://forums.speedlife.net/u/imported_SINISTER)
#### Post date: [August 8, 2006, 1:26pm UTC](https://forums.speedlife.net/t/dash-pad/184100/7 "2006-08-08T13:26:52Z")
i think if pewterss charge for all the free advice and diagonosing he does he be i millionair
---
### Author:  [@subhumanzz](https://forums.speedlife.net/u/subhumanzz)
#### Post date: [August 8, 2006, 1:39pm UTC](https://forums.speedlife.net/t/dash-pad/184100/8 "2006-08-08T13:39:10Z")
> [@HaLLaSS](#):
>
> white faced guages for tha muthafikin lose. fag.
suck a dick :greddy: :tool:
---
### Author:  [@Silver\_SS](https://forums.speedlife.net/u/Silver_SS)
#### Post date: [August 8, 2006, 5:18pm UTC](https://forums.speedlife.net/t/dash-pad/184100/9 "2006-08-08T17:18:51Z")
97 and up, 2 7mm for the bezzal and 4 7mm that hold the cluster down. 93-96 snap the top dash panal off, then drop the lower panel under the sterring column, then there should be a few 7mm holding the mid section in place, then 4 7mm the pull the cluster out. becareful when pulling the top dash peice off. they break easy and people ask big bucs for that. on ebay they go over 100