# DE into a 90 240

**URL:** <https://forums.speedlife.net/t/de-into-a-90-240/85184>\
**Category:** SON240sx Automotive\
**Created:** [April 20, 2005, 7:55pm UTC](https://forums.speedlife.net/t/de-into-a-90-240/85184 "2005-04-20T19:55:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [April 20, 2005, 7:55pm UTC](https://forums.speedlife.net/t/de-into-a-90-240/85184/1 "2005-04-20T19:55:07Z")

</div>

wat is involved in putting a DE into a 90240 and how hard would the power steering be do relocate because i kno i wont find n e 91 power steering lines

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [April 20, 2005, 7:56pm UTC](https://forums.speedlife.net/t/de-into-a-90-240/85184/2 "2005-04-20T19:56:52Z")

</div>

This is the list of stuff you need, I got it from Andrew…Thank him

:arrow: power steering pump (non-hicas)  
:arrow: de power steering lines (not completely necessary, you can make the E ones work)  
:arrow: distributor  
:arrow: uncut harness  
:arrow: ecu  
:arrow: throttle cable (not necessary if you don’t mind the one you have going over the valve cover)  
:arrow: exhaust manifold with EGR pipe connected  
:arrow: intake piping and MAP sensor  
:arrow: change guage cluster harness plug on new engine harness to plug from sohc harness (cut and solder in sohc plug)  
:arrow: DE tach or full cluster  
:arrow: alternator belt, water pump belt and AC belt if you have AC (new recommended)  
:arrow: downpipe to manifold gaskets