# Deck Swap... EDIT: AMP Hookup help!

**URL:** <https://forums.speedlife.net/t/deck-swap-edit-amp-hookup-help/143112>\
**Category:** Canada Nissan Automotive\
**Created:** [June 29, 2006, 1:36pm UTC](https://forums.speedlife.net/t/deck-swap-edit-amp-hookup-help/143112 "2006-06-29T13:36:10Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![imported\_BeNDeR](https://avatars.discourse-cdn.com/v4/letter/i/57b2e6/32.png) [@imported\_BeNDeR](https://forums.speedlife.net/u/imported_BeNDeR)\
**Post date:** [June 29, 2006, 1:36pm UTC](https://forums.speedlife.net/t/deck-swap-edit-amp-hookup-help/143112/1 "2006-06-29T13:36:10Z")

</div>

So my car already has a deck installed and it needs to be replaced. I have my old deck that I am going to be throwing in, but when I went to check it out to see how I would go about taking the old one out, I was baffled :?

How do you remove the plastic cover thing to get at the deck? The plastic thing that surrounds the heater stuff as well as the radio etc. I couldn’t see any screws holding it in, and yet it stays solid.

Sorry if this is a noob post, but im a noob!

Chilton’s didn’t give much insight on this particular problem and I dun wana break something :oops:

Thanks guys

---

<div class="post-metadata">

**Author:** ![TyPhOOn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/typhoon/32/5800_2.png) [@TyPhOOn](https://forums.speedlife.net/u/TyPhOOn)\
**Post date:** [June 29, 2006, 2:07pm UTC](https://forums.speedlife.net/t/deck-swap-edit-amp-hookup-help/143112/2 "2006-06-29T14:07:46Z")

</div>

pull it out from the bottom below the shifter as it is only help in by 6 clips and then it will expose everything

---

<div class="post-metadata">

**Author:** ![imported\_BeNDeR](https://avatars.discourse-cdn.com/v4/letter/i/57b2e6/32.png) [@imported\_BeNDeR](https://forums.speedlife.net/u/imported_BeNDeR)\
**Post date:** [June 29, 2006, 2:37pm UTC](https://forums.speedlife.net/t/deck-swap-edit-amp-hookup-help/143112/3 "2006-06-29T14:37:18Z")

</div>

thought so! thanks man

also, kind of a major shift in topic here, but how do you get the antenna nut off of the power antenna at the back? I worked at that bastard for like an hour (totally messing it up :? ) and it wouldn’t unscrew… any ideas?

---

<div class="post-metadata">

**Author:** ![Citystars](https://avatars.discourse-cdn.com/v4/letter/c/97f17d/32.png) [@Citystars](https://forums.speedlife.net/u/Citystars)\
**Post date:** [July 2, 2006, 1:09am UTC](https://forums.speedlife.net/t/deck-swap-edit-amp-hookup-help/143112/4 "2006-07-02T01:09:46Z")

</div>

hmmm maybe you will have this problem, well atleast my speakers were powered by amps and i couldnt figure out WTF it wouldnt work, then i looked at saw them… so you gotta connect the amp power etc etc… if you run into that problem.

---

<div class="post-metadata">

**Author:** ![imported\_BeNDeR](https://avatars.discourse-cdn.com/v4/letter/i/57b2e6/32.png) [@imported\_BeNDeR](https://forums.speedlife.net/u/imported_BeNDeR)\
**Post date:** [July 2, 2006, 5:34pm UTC](https://forums.speedlife.net/t/deck-swap-edit-amp-hookup-help/143112/5 "2006-07-02T17:34:39Z")

</div>

where exactly did you guys put your amp power through the firewall? The cable that goes from the amp to the battery.

Its driving me absolutely freaking nuts (and I would rather not drill through the firewall unless I absolutely have to)! :grrr

Edit: BTW Typh00n, pulling from the bottom worked like a charm 😃

---

<div class="post-metadata">

**Author:** ![monks](https://avatars.discourse-cdn.com/v4/letter/m/4bbf92/32.png) [@monks](https://forums.speedlife.net/u/monks)\
**Post date:** [July 3, 2006, 12:05am UTC](https://forums.speedlife.net/t/deck-swap-edit-amp-hookup-help/143112/6 "2006-07-03T00:05:27Z")

</div>

there are a few holes on the pass side where the heater core comes in

---

<div class="post-metadata">

**Author:** ![imported\_BeNDeR](https://avatars.discourse-cdn.com/v4/letter/i/57b2e6/32.png) [@imported\_BeNDeR](https://forums.speedlife.net/u/imported_BeNDeR)\
**Post date:** [July 4, 2006, 10:24am UTC](https://forums.speedlife.net/t/deck-swap-edit-amp-hookup-help/143112/7 "2006-07-04T10:24:05Z")

</div>

yup, got some help from a mechanic that used to work on Nissans and we got er beat. He managed to get it through a grommet on the passanger side and I finished the install yesterday.

Sounds super awesome :drinkers:
