# Degreeing cam

**URL:** <https://forums.speedlife.net/t/degreeing-cam/180570>\
**Category:** PittSpeed Automotive\
**Created:** [February 26, 2006, 5:43am UTC](https://forums.speedlife.net/t/degreeing-cam/180570 "2006-02-26T05:43:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\
**Post date:** [February 26, 2006, 5:43am UTC](https://forums.speedlife.net/t/degreeing-cam/180570/1 "2006-02-26T05:43:41Z")

</div>

Do you guys (or girls) usually degree your new cam? I didn’t last time, but it’s probably a good check. Some people have had new Comp ones off by a few degrees. I guess I never trust that stuff will just work (like piston to valve clearance, pushrod length, etc).

Anyone have a degreeing kit? Maybe I should just buy one, I wouldn’t mind having a dial indicator anyway.

---

<div class="post-metadata">

**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\
**Post date:** [February 26, 2006, 5:46am UTC](https://forums.speedlife.net/t/degreeing-cam/180570/2 "2006-02-26T05:46:00Z")

</div>

yeah, go buy the kit so i can borrow it. i never degreed one before, but i have wanted to. i was always to cheap to buy the stuff.

---

<div class="post-metadata">

**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\
**Post date:** [February 26, 2006, 5:49am UTC](https://forums.speedlife.net/t/degreeing-cam/180570/3 "2006-02-26T05:49:21Z")

</div>

> [@5ltr eater](#):
>
> yeah, go buy the kit so i can borrow it. i never degreed one before, but i have wanted to. i was always to cheap to buy the stuff.

Hmmmm, this sounds like the comment that my rockers and lifters are probably bad and I should give them to you. 🙂

This adds up fast when you start tacking on $100 here and $200 there. I’m already over budget, gotta start selling the old stuff!

---

<div class="post-metadata">

**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\
**Post date:** [February 26, 2006, 5:53am UTC](https://forums.speedlife.net/t/degreeing-cam/180570/4 "2006-02-26T05:53:21Z")

</div>

> [@Jeff95TA](#):
>
> Hmmmm, this sounds like the comment that my rockers and lifters are probably bad and I should give them to you. 🙂
> 
> This adds up fast when you start tacking on $100 here and $200 there. I’m already over budget, gotta start selling the old stuff!

pm me a price and specs on the lifters and cam and i see what i can do.

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [February 26, 2006, 6:29am UTC](https://forums.speedlife.net/t/degreeing-cam/180570/5 "2006-02-26T06:29:19Z")

</div>

jeff,ask phil my butt down at the west newton garage,he has the tool & can do it or we can get it & do it!