# Dezod New Product **URL:** \ **Category:** Vendor Marketplace\ **Created:** [December 18, 2008, 10:12am UTC](https://forums.speedlife.net/t/dezod-new-product/59970 "2008-12-18T10:12:24Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![dezod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dezod/32/7467_2.png) [@dezod](https://forums.speedlife.net/u/dezod)\ **Post date:** [December 18, 2008, 10:12am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/1 "2008-12-18T10:12:24Z")
Vacuum manifolds. Billet Aluminum, polished only. ![http://www.dezod.com/prod_images_large/DZMVACMANI21.jpg](http://www.dezod.com/prod_images_large/DZMVACMANI21.jpg) $40.78 as pictured, taxed and picked up. ---
**Author:** ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)\ **Post date:** [December 19, 2008, 6:36am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/2 "2008-12-19T06:36:10Z")
clean looking.:tup:…deff looks like it should be more expensive than 40.78 nice work:) ---
**Author:** ![dezod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dezod/32/7467_2.png) [@dezod](https://forums.speedlife.net/u/dezod)\ **Post date:** [December 19, 2008, 9:00am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/3 "2008-12-19T09:00:10Z")
> [@suzukifreek](#): > > clean looking.:tup:…deff looks like it should be more expensive than 40.78 nice work:) Thank you! We are not here to “rake” people for parts. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [December 19, 2008, 9:05am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/4 "2008-12-19T09:05:07Z")
I like the manifold, but i think the NPT barbs kinda make it look like crap. Have you thought about maybe using an SAE ORB barb? ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [December 19, 2008, 9:11am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/5 "2008-12-19T09:11:57Z")
also check for standpipe style barbed fittings, you could eliminate the tapping and switch to a press fit, probably CHEAPER in the long run and a better look. IDK if you can get them in 1/8 though. I’ll look into it. ---
**Author:** ![dezod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dezod/32/7467_2.png) [@dezod](https://forums.speedlife.net/u/dezod)\ **Post date:** [December 19, 2008, 9:14am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/6 "2008-12-19T09:14:42Z")
> [@newman](#): > > also check for standpipe style barbed fittings, you could eliminate the tapping and switch to a press fit, probably CHEAPER in the long run and a better look. IDK if you can get them in 1/8 though. I’ll look into it. It will also work well with one touch pneumatic fittings, which are the cats meow. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [December 19, 2008, 9:22am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/7 "2008-12-19T09:22:04Z")
Yeah, one touch fittings are nice, but they typically require a non-silicone based hose. Typically polypropylene tubing which has low flex… I’m trying to find 1/8th standpipe fittings… This is a 1/4 inch one, it would look super clean and you could drop a step from machining… just a thought, if you can find them ![http://apps.parker.com/PMCIMG/9422.JPG](http://apps.parker.com/PMCIMG/9422.JPG) ---
**Author:** ![dezod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dezod/32/7467_2.png) [@dezod](https://forums.speedlife.net/u/dezod)\ **Post date:** [December 19, 2008, 10:00am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/8 "2008-12-19T10:00:49Z")
> [@newman](#): > > Yeah, one touch fittings are nice, but they typically require a non-silicone based hose. Typically polypropylene tubing which has low flex… > > I’m trying to find 1/8th standpipe fittings… > > This is a 1/4 inch one, it would look super clean and you could drop a step from machining… just a thought, if you can find them Yes true about the tubing. I appreciate the feedback. I will bring this up on the next production run. 🙂 Right now we have 99 left in stock. ---
**Author:** ![dezod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dezod/32/7467_2.png) [@dezod](https://forums.speedlife.net/u/dezod)\ **Post date:** [December 19, 2008, 10:01am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/9 "2008-12-19T10:01:39Z")
![http://www.dezod.com/prod_images_large/DZMVACMANI21.jpg](http://www.dezod.com/prod_images_large/DZMVACMANI21.jpg) ---
**Author:** ![dezod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dezod/32/7467_2.png) [@dezod](https://forums.speedlife.net/u/dezod)\ **Post date:** [January 5, 2009, 11:41am UTC](https://forums.speedlife.net/t/dezod-new-product/59970/10 "2009-01-05T11:41:32Z")
Thanks for the recent orders ladies and gents.