# Diagnose My Spark Plugs Please

**URL:** <https://forums.speedlife.net/t/diagnose-my-spark-plugs-please/48241>\
**Category:** NYSpeed Automotive\
**Created:** [May 11, 2008, 9:11am UTC](https://forums.speedlife.net/t/diagnose-my-spark-plugs-please/48241 "2008-05-11T09:11:57Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![JustinH](https://avatars.discourse-cdn.com/v4/letter/j/9fc29f/32.png) [@JustinH](https://forums.speedlife.net/u/JustinH)\
**Post date:** [May 13, 2008, 5:05pm UTC](https://forums.speedlife.net/t/diagnose-my-spark-plugs-please/48241/21 "2008-05-13T17:05:53Z")

</div>

> [@Dr.Stevil](#):
>
> if the head is aluminum, I wouldn’t do it. I made that mistake once… bout a month later I blew a plug out of the head on NFB. I had to take apart the top end of the motor and re-tap 6 of the holes using “time-certs”.
> 
> took around a month or so from start to finish… not fun

Yeah I agree steve.

I remember when you had to heil coil that motor in your garage.

---

<div class="post-metadata">

**Author:** ![Dr.Stevil](https://avatars.discourse-cdn.com/v4/letter/d/da6949/32.png) [@Dr.Stevil](https://forums.speedlife.net/u/Dr.Stevil)\
**Post date:** [May 13, 2008, 6:01pm UTC](https://forums.speedlife.net/t/diagnose-my-spark-plugs-please/48241/22 "2008-05-13T18:01:40Z")

</div>

yeah, that was a royal pain in the ass. Didn’t you come over to help out with it?

to this day, I wont check/change my plugs unless the motor is cold lol

---

<div class="post-metadata">

**Author:** ![JustinH](https://avatars.discourse-cdn.com/v4/letter/j/9fc29f/32.png) [@JustinH](https://forums.speedlife.net/u/JustinH)\
**Post date:** [May 14, 2008, 3:14pm UTC](https://forums.speedlife.net/t/diagnose-my-spark-plugs-please/48241/23 "2008-05-14T15:14:02Z")

</div>

> [@Dr.Stevil](#):
>
> yeah, that was a royal pain in the ass. Didn’t you come over to help out with it?
> 
> to this day, I wont check/change my plugs unless the motor is cold lol

Nah, I stood over it and drank beers, and acted like I knew what the hell I was doing…

When I did the plugs in my ecotech saturn with an aluminum head, I let it sit overnight, and used a torque wrench.

[Previous page](https://forums.speedlife.net/t/diagnose-my-spark-plugs-please/48241.md?page=1)
