# dimensions for stabalizer link

**URL:** https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577
**Category:** Vendor Marketplace
**Created:** [September 18, 2007, 9:01pm UTC](https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577 "2007-09-18T21:01:54Z")
**Posts on this page:** 8
**Page:** 1

<div class="post-metadata">

### Author: ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)
#### Post date: [September 18, 2007, 9:01pm UTC](https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577/1 "2007-09-18T21:01:54Z")

</div>

i’m interested in the length of the piece  
for the Toe Link  
as well as the Traction Arms  
i’m also interested in the width of the |\_| bracket  
i’m trying to see if this fits another application

---

<div class="post-metadata">

### Author: ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [September 19, 2007, 5:56am UTC](https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577/2 "2007-09-19T05:56:58Z")

</div>

measuring the stock pieces is your best bet.

---

<div class="post-metadata">

### Author: ![jammin1911](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@jammin1911](https://forums.speedlife.net/u/jammin1911)
#### Post date: [September 19, 2007, 6:27am UTC](https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577/3 "2007-09-19T06:27:02Z")

</div>

they are very adjustable so there isnt a “length”

bing maybe you could just provide him the maximum and minimum lengths?

---

<div class="post-metadata">

### Author: ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)
#### Post date: [September 19, 2007, 8:36pm UTC](https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577/4 "2007-09-19T20:36:24Z")

</div>

I will reply this weekend with measurements.

---

<div class="post-metadata">

### Author: ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)
#### Post date: [September 23, 2007, 1:09pm UTC](https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577/5 "2007-09-23T13:09:23Z")

</div>

![http://www.bamdesign.org/CAR/toelink1.jpg](http://www.bamdesign.org/CAR/toelink1.jpg)  
 ![http://www.bamdesign.org/CAR/toelink2.jpg](http://www.bamdesign.org/CAR/toelink2.jpg)

---

<div class="post-metadata">

### Author: ![Matt89](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matt89/32/3202_2.png) [@Matt89](https://forums.speedlife.net/u/Matt89)
#### Post date: [September 23, 2007, 8:25pm UTC](https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577/6 "2007-09-23T20:25:31Z")

</div>

That curve might throw off your measurement.

hahaha.

---

<div class="post-metadata">

### Author: ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)
#### Post date: [September 23, 2007, 8:28pm UTC](https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577/7 "2007-09-23T20:28:12Z")

</div>

you can ignore the curve. it isn’t really needed and there is enough clearance.

---

<div class="post-metadata">

### Author: ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)
#### Post date: [September 25, 2007, 9:24am UTC](https://forums.speedlife.net/t/dimensions-for-stabalizer-link/109577/8 "2007-09-25T09:24:26Z")

</div>

??? BUMP