# DIY InlinePro Turbo s2000(done, now w/vids./dyno graphs) **URL:** \ **Category:** Builds\ **Created:** [February 26, 2009, 7:05pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693 "2009-02-26T19:05:25Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\ **Post date:** [February 26, 2009, 7:05pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/1 "2009-02-26T19:05:25Z")
Well as many of you remember, I popped my dads motor at dunnville when I money shifted, not once, but twice and each time saying, “its a honda…itll be okay” only to have the second time be the TKO. bought a 46K mile motor from Inlinepro, that was taken out for a customer’s fully built motor. also bought Inlinepro’s entire s2000 setup([http://www.inlinepro.com/s2k.html](http://www.inlinepro.com/s2k.html)) " **S2000 Turbo Kit** [FONT=arial][SIZE=1] [FONT=Arial Black][COLOR=black]InlinePRO offers a turbo kit like no other. With the ability to produce over 450rwhp on pump gas and a starting price of $3995, every S2000 enthusiast can have the extra reliable power they have been searching for. Our turbo kit features inlinePRO’s very own turbo manifold. With careful research and development, we have created a true production, cast design manifold to create a strong manifold that will not crack. With a centralized wastegate location, boost creep/boost spike is kept to a minimum. We have designed and manufactured many parts in our turbo kit, from the blow-off valve to the chargepipe it is mounted on. Our custom designed charge pipes create an OEM look and feel in the engine. With a mirror polished finish, you can impress the judges at the carshows and still puts down good power! Mirror finished downpipe and dumptube is also included to release the exhaust gases. An engine management system is required to properly tune your S2000 along with the turbo kit. ``` [SIZE=2] Turbo Kit Parts List [SIZE=1] ``` inlinePRO Cast Iron T3/T4 Turbo Exhaust Manifold Precision Turbo GT T3/T4(b/e) (Any SC or GT non-ball bearing series turbo) Turbosmart 38mm Wastegate inlinePRO Billet Blow-Off Valve 2.5" Mandrel-Bent Aluminum Charge Pipes (mirror polished) inlinePRO 600hp Front Mount Intercooler High Temp Charge Pipe Couplers & Reducers 3” Stainless Steel Downpipe (mirror polished) Stainless Steel Wastegate Dump Tube (mirror polished) High Pressure 600hp In-Tank Fuel Pump Turbo Oil Feed Kit Turbo Oil Return Kit Air Filter Kit Hardware Kit [/SIZE][/SIZE][/FONT][/COLOR][/SIZE][/FONT][FONT=arial][SIZE=3][FONT=arial][SIZE=1][COLOR=#ffffff][FONT=arial][SIZE=2][COLOR=#b10000][FONT=arial][SIZE=1][COLOR=#ffffff][FONT=arial][SIZE=2][COLOR=#b10000]Optional Equipment [FONT=arial][SIZE=1][COLOR=#808080] [FONT=Arial Black][SIZE=1][COLOR=black]AEM Plug & Play Engine Management System Ball Bearing Turbo Upgrade Ball Bearing Turbo Coolant Line Kit inlinePRO 3mm Turbo Headgasket 1000cc Injectors Fuel Rail Adaptor Kit Injector Clip Set 3-Bar Map Sensor with Connector & Billet Adaptor Plate [/SIZE][/FONT][/COLOR][/SIZE][/FONT][/COLOR][/SIZE][/FONT][/COLOR][/SIZE][/FONT][/COLOR][/SIZE][/FONT][/COLOR][/SIZE][/FONT][/COLOR][/SIZE][/FONT] [FONT=arial][SIZE=1][FONT=Arial Black][SIZE=2][COLOR=black][SIZE=1] [/SIZE][/SIZE][/FONT][/COLOR][/SIZE][/FONT] ---
**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\ **Post date:** [February 26, 2009, 7:05pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/2 "2009-02-26T19:05:41Z")
I decided to turbo my dads honda for christmas because he was without it for almost 2 months and when he bought the car he said he felt it was lacking in the “oomph” department. so i figured that my next project would be for him. its a FANTASTiC car from the factory, but it was always the torque-less wonder. now it will be torque-less but fast. here she is…parts pics will be coming up in a few minutes. install begins this weekend(just got my ARP headstuds in today and was waiting for everything to begin the project) this is the most recent shot with the SSRs ![http://i31.photobucket.com/albums/c355/viggenman/img_6422.jpg](http://i31.photobucket.com/albums/c355/viggenman/img_6422.jpg) ![http://i31.photobucket.com/albums/c355/viggenman/crw_9025.jpg](http://i31.photobucket.com/albums/c355/viggenman/crw_9025.jpg) ![http://i31.photobucket.com/albums/c355/viggenman/pIMG_16691.jpg](http://i31.photobucket.com/albums/c355/viggenman/pIMG_16691.jpg) [http://video.google.com/videoplay?docid=-476834616230526011](http://video.google.com/videoplay?docid=-476834616230526011) ^^Got the drift the first time0:34 in(at a whopping 38 miles an hour in 1st) [http://video.google.com/videoplay?docid=1401502317459195219](http://video.google.com/videoplay?docid=1401502317459195219) ^^did not get it the second time in the cool camera location=( 0:34 in(at a ridiculous 49mph in 1st. lol) and a video of me sucking at life for the first 5 minutes i ever drove a RWD car on a “track”(i was at dunnville…) and the madness that ensued… [http://nyspeed.com/forums/showthread.php?t=51455&highlight=soloIIscoob+lapping+dunnville](http://nyspeed.com/forums/showthread.php?t=51455&highlight=soloIIscoob+lapping+dunnville) the kit has everything i will need to safely run 400+rwhp(i already had the spec clutch and flywheel installed with the used engine by joe at Lia Honda, thanks again Joe!)but to be extra cautious i got ARP headstuds that are not included(paid 80$, too=) or pictured ![http://i31.photobucket.com/albums/c355/viggenman/VACandINLINEPRODIYpics015.jpg](http://i31.photobucket.com/albums/c355/viggenman/VACandINLINEPRODIYpics015.jpg) ![http://i31.photobucket.com/albums/c355/viggenman/VACandINLINEPRODIYpics016.jpg](http://i31.photobucket.com/albums/c355/viggenman/VACandINLINEPRODIYpics016.jpg) …and MJ guarding my parts corner so btfu ![http://i31.photobucket.com/albums/c355/viggenman/VACandINLINEPRODIYpics018.jpg](http://i31.photobucket.com/albums/c355/viggenman/VACandINLINEPRODIYpics018.jpg)… ---
**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\ **Post date:** [February 26, 2009, 7:06pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/3 "2009-02-26T19:06:06Z")
this is a reservation ---
**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\ **Post date:** [February 26, 2009, 7:06pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/4 "2009-02-26T19:06:23Z")
this also is being reserved ---
**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\ **Post date:** [February 26, 2009, 7:06pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/5 "2009-02-26T19:06:43Z")
another spot ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [February 26, 2009, 7:08pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/6 "2009-02-26T19:08:54Z")
wat ---
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [February 26, 2009, 7:09pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/7 "2009-02-26T19:09:01Z")
that sucks. shoudda gone ultimate racinggggg :tspry: ---
**Author:** ![boostedhatch](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedhatch/32/5327_2.png) [@boostedhatch](https://forums.speedlife.net/u/boostedhatch)\ **Post date:** [February 26, 2009, 7:11pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/8 "2009-02-26T19:11:53Z")
sounds like what happened to my buddies s2k…bounced it off rev limiter at a stop light and it just shut off…valve float put a valve right into his piston ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [February 26, 2009, 7:15pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/9 "2009-02-26T19:15:07Z")
> [@boostedhatch](#): > > sounds like what happened to my buddies s2k…bounced it off rev limiter at a stop light and it just shut off…valve float put a valve right into his piston i swear im having dejavu ---
**Author:** ![brent\_strong](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/brent_strong/32/7203_2.png) [@brent\_strong](https://forums.speedlife.net/u/brent_strong)\ **Post date:** [February 26, 2009, 7:16pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/10 "2009-02-26T19:16:07Z")
> [@boostedhatch](#): > > sounds like what happened to my buddies s2k…bounced it off rev limiter at a stop light and it just shut off…valve float put a valve right into his piston :picard: I guess that’d God’s way of saying he hates ricers. ---
**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\ **Post date:** [February 26, 2009, 7:28pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/11 "2009-02-26T19:28:09Z")
> [@Toda Party](#): > > that sucks. > > shoudda gone ultimate racinggggg :tspry: why is that? ---
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [February 26, 2009, 7:52pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/12 "2009-02-26T19:52:03Z")
YOU’LL SEE VROOM VROOM! (ninja matt would appreciate this) ---
**Author:** ![psychopjv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psychopjv/32/7251_2.png) [@psychopjv](https://forums.speedlife.net/u/psychopjv)\ **Post date:** [February 26, 2009, 9:16pm UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/13 "2009-02-26T21:16:48Z")
> [@Toda Party](#): > > YOU’LL SEE > > VROOM VROOM! > > (ninja matt would appreciate this) i miss our shadow toda…my brother may be selling his 87 shelby soon… ---
**Author:** ![MrSmith](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mrsmith/32/5254_2.png) [@MrSmith](https://forums.speedlife.net/u/MrSmith)\ **Post date:** [March 3, 2009, 7:43am UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/14 "2009-03-03T07:43:00Z")
> [@SoloIIscoob](#): > > why is that? Off the top of my head no cutting and hacking required for the ic pipe, Tial instead of turbosmart, oil filter relocation kit that does not leak. I dont get why you paid to install another stock longblock when you were already spending a pretty penny. Probably ran low on funds? You should invest in stage 8 bolts so you don’t have to worry about nuts and bolts backing out. How are you planning on passing inspection with the Aem? Do you have a tuner lined up? Good luck with the build. We should do some pulls when your car is done. :tup: ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [March 3, 2009, 8:08am UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/15 "2009-03-03T08:08:49Z")
How mad is your dad going to be if your X-mas present pops his new motor? ---
**Author:** ![Xander](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xander/32/7597_2.png) [@Xander](https://forums.speedlife.net/u/Xander)\ **Post date:** [March 3, 2009, 8:58am UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/16 "2009-03-03T08:58:16Z")
> [@Viper966](#): > > How mad is your dad going to be if your X-mas present pops his new motor? LOL if or when… 😉 It will be cool to see how this stacks up to Smith’s car. X… ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [March 3, 2009, 9:17am UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/17 "2009-03-03T09:17:02Z")
I think if I blew my fathers motor I’d be getting a beating for an x-mas present ---
**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\ **Post date:** [March 3, 2009, 9:18am UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/18 "2009-03-03T09:18:56Z")
> [@MrSmith](#): > > Off the top of my head no cutting and hacking required for the ic pipe, Tial instead of turbosmart, oil filter relocation kit that does not leak. > I dont get why you paid to install another stock longblock when you were already spending a pretty penny. Probably ran low on funds? You should invest in stage 8 bolts so you don’t have to worry about nuts and bolts backing out. > How are you planning on passing inspection with the Aem? Do you have a tuner lined up? > Good luck with the build. We should do some pulls when your car is done. :tup: car is reg.'d in hotlanta and has no emissions/inspections…tuner will be inline pro. i was going to use Evanstuning but he is way booked. used stock longblock with 46K miles was $3400 and a rebuild/build-up is 10K-30K depending upon parts/how in depth i wanted to go. car will be conservative for my father at 340 or so whp. and will be ran like that most frequently. plan on getting a race-gas tune eventually. ---
**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\ **Post date:** [March 3, 2009, 9:20am UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/19 "2009-03-03T09:20:11Z")
> [@BREETIME](#): > > I think if I blew my fathers motor I’d be getting a beating for an x-mas present even he let you race it regularly(SCCA, HPDEs, etc) and is aware of the consequences of such an action? i paid for everything to be replaced and now to perform better, so he cant be THAT upset/angry/etc. ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [March 3, 2009, 9:28am UTC](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693/20 "2009-03-03T09:28:57Z")
> [@SoloIIscoob](#): > > even he let you race it regularly(SCCA, HPDEs, etc) and is aware of the consequences of such an action? > > i paid for everything to be replaced and now to perform better, so he cant be THAT upset/angry/etc. i cant imagine turbocharging my dads car… why not just buy your own at this point? [Next page](https://forums.speedlife.net/t/diy-inlinepro-turbo-s2000-done-now-w-vids-dyno-graphs/63693.md?page=2)