# DIY: Temporary home-made Ignitor Harness

**URL:** <https://forums.speedlife.net/t/diy-temporary-home-made-ignitor-harness/17044>\
**Category:** Builds\
**Created:** [September 6, 2006, 9:25am UTC](https://forums.speedlife.net/t/diy-temporary-home-made-ignitor-harness/17044 "2006-09-06T09:25:21Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [September 6, 2006, 4:42pm UTC](https://forums.speedlife.net/t/diy-temporary-home-made-ignitor-harness/17044/4 "2006-09-06T16:42:22Z")

</div>

you should have gotten a soldering iron, it would have made things much better and given u piece of mind that the wires arent going to come apart.

ide say that if you did not solder them, you definitely need to get a new harness

asap

---

_[View the full topic](https://forums.speedlife.net/t/diy-temporary-home-made-ignitor-harness/17044)._