# Dkid15's K24 OEM Vtec killer EP3 **URL:** \ **Category:** Builds\ **Created:** [November 3, 2009, 8:22am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070 "2009-11-03T08:22:46Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [November 3, 2009, 8:22am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/1 "2009-11-03T08:22:46Z")
UPDATE PICS PAGE 3 [http://shift518.gom-host.com/showthread.php?t=13650&page=4](http://shift518.gom-host.com/showthread.php?t=13650&page=4) Bottom end assembled PAGE 4 [http://shift518.gom-host.com/showthread.php?t=13650&page=4](http://shift518.gom-host.com/showthread.php?t=13650&page=4) So im in the same boat as many of you. I dont have much money to spend on my car and i want to go fast but still be reliable. I didnt think that was possible until i saw a new way of utilizing the non vtec exhaust rockers of “economy vtec” engines. My goals for this build are to use as many oem parts as possible. I believe everything internally will be oem except for ARP head studs. Anyway heres my build and i hope it can be a guideline for many of you. If you have kpro and wanted to do this to your ep3 it can be done for under 250dollars. I will take plenty of pics and videos as this build progresses. I wasnt going to post this up but its almost done. I just need some time and bearings from honda. Im not going to give any estimates but a stock compression k24a4 running a2 cams put down 234whp and 180wtq and went 13.1 on street tires. Anyway hope you guys enjoy the build as much as i am. Ill post alot up over thanksgiving break, i have so much work for school right now so i might not be able to answer all your questions about the setup. Plans for the build k24a4 block (already have) k20a2 oil pump (already have modified) k20a2 pan ( already have) K24a1 head(RECIEVED 10/31) k20a2 vlavetrain ( have) crv exhaust rockers ( recieved) k20a2 cams and gears ( recieved ) type-r baffle (already have) Tsx pistons(RECIEVED 10/31) Crv mount (have) oem rings (RECIEVED 10/31) oem bearings ( have) oem head gasket ( have) PRB intake manifold to start with ( already have) Maybe a ported RBB or just an RBC Modified 270cc ep3 injectors sent out to Injector rehab for cleaning and flowing New clutch? Kpro (have) New Honda valve stem seals (recieved) 3 inch CAI/VStack/KN filter (have) Tune from mike @elite tuning most likely. Ill probably upgrade my shitty obx header to the kiddracing setup as well out to 2.5 inch piping and an obx twinloop. Few teaser pics: ![http://i183.photobucket.com/albums/x194/dkid15/110_0532.jpg](http://i183.photobucket.com/albums/x194/dkid15/110_0532.jpg) These puppies make it wall work along with my A2 cams ![http://i183.photobucket.com/albums/x194/dkid15/110_0531.jpg](http://i183.photobucket.com/albums/x194/dkid15/110_0531.jpg) The heart of a champion ![http://i183.photobucket.com/albums/x194/dkid15/110_0530.jpg](http://i183.photobucket.com/albums/x194/dkid15/110_0530.jpg) Already modified and ready to go. Thanks LKSI ![http://i183.photobucket.com/albums/x194/dkid15/110_0529.jpg](http://i183.photobucket.com/albums/x194/dkid15/110_0529.jpg) TSX pistons ready to give me a bump in compression ![http://i183.photobucket.com/albums/x194/dkid15/110_0528.jpg](http://i183.photobucket.com/albums/x194/dkid15/110_0528.jpg) I took the liberty of removing those bullshit k24a1 cams and rocker assembly already 🙂 ![http://i183.photobucket.com/albums/x194/dkid15/Picture006.jpg](http://i183.photobucket.com/albums/x194/dkid15/Picture006.jpg) And finally the beast ![http://i183.photobucket.com/albums/x194/dkid15/autox.jpg](http://i183.photobucket.com/albums/x194/dkid15/autox.jpg) ---
**Author:** ![big\_red](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/big_red/32/6328_2.png) [@big\_red](https://forums.speedlife.net/u/big_red)\ **Post date:** [November 3, 2009, 8:25am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/2 "2009-11-03T08:25:28Z")
this car and killer shouldnt be in the same line, you gay beat by the kramers gay parade mobile. ---
**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\ **Post date:** [November 3, 2009, 8:37am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/3 "2009-11-03T08:37:21Z")
cant wait to witness the assembly of this POS and possibly call stallmer over to spin yo’ bearings real quick > [@Ok, who is the idiot that crashed his WRX on Sheradin this morning?](https://forums.speedlife.net/t/ok-who-is-the-idiot-that-crashed-his-wrx-on-sheradin-this-morning/24905/65): > > this car and killer shouldnt be in the same line, you gay beat by the kramers gay parade mobile. lolololololol play nice, david. spring '10 the ep3 will be faster and the mr2 will be slower. no moar fun battlez. ---
**Author:** ![big\_red](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/big_red/32/6328_2.png) [@big\_red](https://forums.speedlife.net/u/big_red)\ **Post date:** [November 3, 2009, 8:44am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/4 "2009-11-03T08:44:08Z")
yea this may need the 6speg bearing mod ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [November 3, 2009, 8:49am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/5 "2009-11-03T08:49:47Z")
I said killer due to the cams. Not because the car is killer. ---
**Author:** ![Murrdog9000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/murrdog9000/32/6391_2.png) [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)\ **Post date:** [November 3, 2009, 8:59am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/6 "2009-11-03T08:59:04Z")
should of charged you extra for the oil pump since it was modified by lance haha ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [November 3, 2009, 9:05am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/7 "2009-11-03T09:05:10Z")
Its got frivilous hair precision lol. I put it on the other night and its beautiful. Half the people who read this thread arent going to understand the setup. ---
**Author:** ![Murrdog9000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/murrdog9000/32/6391_2.png) [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)\ **Post date:** [November 3, 2009, 9:12am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/8 "2009-11-03T09:12:40Z")
> [@Newman's 1986 BMW 326rb build thread.](https://forums.speedlife.net/t/newmans-1986-bmw-326rb-build-thread/22123/676): > > Its got frivilous hair precision lol. I put it on the other night and its beautiful. Half the people who read this thread arent going to understand the setup. haha… he did a good job on it, he seriously probably had to go at the thing 15-20 times, constantly checking to see if it was good or not. Then I just bought the s2k pump, he was riled. ---
**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\ **Post date:** [November 3, 2009, 9:16am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/9 "2009-11-03T09:16:38Z")
> [@FS: 19 ft sailboat](https://forums.speedlife.net/t/fs-19-ft-sailboat/24940/7): > > haha… he did a good job on it, he seriously probably had to go at the thing 15-20 times, constantly checking to see if it was good or not. Then I just bought the s2k pump, he was riled. lolol ---
**Author:** ![DB2\_GS-R](https://avatars.discourse-cdn.com/v4/letter/d/a87d85/32.png) [@DB2\_GS-R](https://forums.speedlife.net/u/DB2_GS-R)\ **Post date:** [November 3, 2009, 9:42am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/10 "2009-11-03T09:42:41Z")
Nice build thread you have there. Should be fun once you get it done. You might be able to get away with the 310cc injectors but might want to think about upgrading in the future ---
**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\ **Post date:** [November 3, 2009, 10:24am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/11 "2009-11-03T10:24:55Z")
isnt this the car that got beat with 3 ppl were in marks stock si? Then i come flying by in the m3 :rofl Looks good none the less. I never knew there was such a difference fro different SI motors. Looks like its finally time to step up my Honda knowledge. ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [November 3, 2009, 10:42am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/12 "2009-11-03T10:42:11Z")
we beat marks SI lol ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [November 3, 2009, 10:58am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/13 "2009-11-03T10:58:44Z")
> [@Newman's 1986 BMW 326rb build thread.](https://forums.speedlife.net/t/newmans-1986-bmw-326rb-build-thread/22123/676): > > Its got frivilous hair precision lol. I put it on the other night and its beautiful. **Half the people who read this thread arent going to understand the setup.** I am included in this 50%. Care to elaborate for me? :thumbup ---
**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\ **Post date:** [November 3, 2009, 11:04am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/14 "2009-11-03T11:04:07Z")
> [@old skool nerd... anyone play Dune 2 - The Sleeper Has Awakened](https://forums.speedlife.net/t/old-skool-nerd-anyone-play-dune-2-the-sleeper-has-awakened/25250/10): > > I am included in this 50%. Care to elaborate for me? :thumbup +1 Im in that 50% also. ---
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [November 3, 2009, 11:05am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/15 "2009-11-03T11:05:59Z")
13.1 @ how fast??? ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [November 3, 2009, 3:00pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/16 "2009-11-03T15:00:04Z")
> [@old skool nerd... anyone play Dune 2 - The Sleeper Has Awakened](https://forums.speedlife.net/t/old-skool-nerd-anyone-play-dune-2-the-sleeper-has-awakened/25250/10): > > I am included in this 50%. Care to elaborate for me? :thumbup > [@FS: IPOD NANO 2GB White Face](https://forums.speedlife.net/t/fs-ipod-nano-2gb-white-face/25222/5): > > +1 > > Im in that 50% also. Well since the ECONOMY vtec motors k20a3/k24a1/k24a4 only ride one lobe on the exhaust side. So basically im running exhaust rockers on both sides of the head. Now that ive switched to an ivtec cam you run on the vtec lobe all the time. hence the term vtec killer setup. This all using oem parts. Its relatively new and very reliable. > [@people with paint/body experience and good ideas...](https://forums.speedlife.net/t/people-with-paint-body-experience-and-good-ideas/25265/30): > > 13.1 @ how fast??? 13.1 @ 105. The owner has since ran slicks and managed a 12.8 @106. Ill have a nice bump in compression over him also. Im not too concerned about the 1/4 mile though. ---
**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\ **Post date:** [November 3, 2009, 3:06pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/17 "2009-11-03T15:06:14Z")
essentially he’ll “be in vtec” all the time, on a 2.4 block instead of the 2.0 that came in his Si and RSX’s. this’ll make a pretty nice tq bump, too. should be a nice auto x power curve and still pull mid 100’s in the 1/4 mile, and on a very small budget, too (all OEM parts) ---
**Author:** ![6SPD\_S4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/6spd_s4/32/6326_2.png) [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)\ **Post date:** [November 3, 2009, 3:18pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/18 "2009-11-03T15:18:34Z")
Want me to hook you up with some dope bearing modz? ---
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [November 3, 2009, 3:22pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/19 "2009-11-03T15:22:31Z")
105 is movin nice ---
**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\ **Post date:** [November 3, 2009, 3:48pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/20 "2009-11-03T15:48:35Z")
> [@Newman's 1986 BMW 326rb build thread.](https://forums.speedlife.net/t/newmans-1986-bmw-326rb-build-thread/22123/701): > > Want me to hook you up with some dope bearing modz? joe jiggs will rape your family if you fuck up this ride > [@tdi\_logik"](#): > > 105 is movin nice i sense sarcasm :rofl [Next page](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070.md?page=2)