# Dkid15's K24 OEM Vtec killer EP3 **URL:** \ **Category:** Builds\ **Created:** [November 3, 2009, 8:22am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070 "2009-11-03T08:22:46Z")\ **Posts on this page:** 20\ **Page:** 6
**Author:** ![cazwrx187](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cazwrx187/32/6388_2.png) [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)\ **Post date:** [December 19, 2009, 10:37am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/101 "2009-12-19T10:37:47Z")
> [@Versus channel......](https://forums.speedlife.net/t/versus-channel/27463/16): > > oem honda bearings \> acl Does honda make an application for Subarus? :rofl ---
**Author:** ![DB2\_GS-R](https://avatars.discourse-cdn.com/v4/letter/d/a87d85/32.png) [@DB2\_GS-R](https://forums.speedlife.net/u/DB2_GS-R)\ **Post date:** [December 19, 2009, 10:43am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/102 "2009-12-19T10:43:17Z")
> [@Getting hit in the nuts isn't priceless.](https://forums.speedlife.net/t/getting-hit-in-the-nuts-isnt-priceless/27465/9): > > Gotta love stock b series pumps 10k all day :thumb:thumb Keep up the good work bob. Cant wait to see it out this spring ---
**Author:** ![rustyjones](https://avatars.discourse-cdn.com/v4/letter/r/71c47a/32.png) [@rustyjones](https://forums.speedlife.net/u/rustyjones)\ **Post date:** [December 19, 2009, 2:46pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/103 "2009-12-19T14:46:10Z")
Is this the ep3 that I beat with brook’s 4 door gs-r? or is that the other one?..well from a dig…from a roll I think he beat me…but I was teh winnar from the dig 😃 Beleive he said he had a a2 intake mani…and exhaust? i forget…either way dude…great setup…been seeing builds like your making 230whp all day. ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [December 19, 2009, 6:04pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/104 "2009-12-19T18:04:56Z")
Yes it is austin. I had i/rh/e at time. Motor will for sure be done by january 18th ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [December 20, 2009, 7:57pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/105 "2009-12-20T19:57:43Z")
Just wanted to update - I placed an order to honda for a new set of rings, rod bolts, valve stem seals, and a new head gasket. Still trying to figure out the rod situation. The motor is getting measured up tommorow by my friend so hopefully tommorow ill order bearings. Anyway heres some pics of progress. Tommorow Jiggs will help me out hopefully and we can really get this thing going. Finally on the engine stand ![http://i183.photobucket.com/albums/x194/dkid15/complete001.jpg](http://i183.photobucket.com/albums/x194/dkid15/complete001.jpg) Breaker bar on the main bolts ![http://i183.photobucket.com/albums/x194/dkid15/complete002.jpg](http://i183.photobucket.com/albums/x194/dkid15/complete002.jpg) Always Bag your bolts. ![http://i183.photobucket.com/albums/x194/dkid15/complete003.jpg](http://i183.photobucket.com/albums/x194/dkid15/complete003.jpg) One of two prying points. I got the case off easily but many arent so lucky ![http://i183.photobucket.com/albums/x194/dkid15/complete004.jpg](http://i183.photobucket.com/albums/x194/dkid15/complete004.jpg) Looks pretty good ![http://i183.photobucket.com/albums/x194/dkid15/complete005.jpg](http://i183.photobucket.com/albums/x194/dkid15/complete005.jpg) ![http://i183.photobucket.com/albums/x194/dkid15/complete006.jpg](http://i183.photobucket.com/albums/x194/dkid15/complete006.jpg) ![http://i183.photobucket.com/albums/x194/dkid15/complete007.jpg](http://i183.photobucket.com/albums/x194/dkid15/complete007.jpg) ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [December 20, 2009, 8:05pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/106 "2009-12-20T20:05:28Z")
Well im going to be modifying the rockers tommorow and the accepted method to doing so is chewing bubble gum, covering the soon to be removed area with this gum, shave the area and the shavings will stick to the gum. In case your wondering i have to shave the rockers if i ever decide to upgrade to a more agressive cam like the z1, tsx, ITR cams. ![http://i183.photobucket.com/albums/x194/dkid15/complete011.jpg](http://i183.photobucket.com/albums/x194/dkid15/complete011.jpg) LOL i like oem parts like the nogs like menthols ---
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [December 20, 2009, 8:13pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/107 "2009-12-20T20:13:13Z")
hope you are satisfied with the end result partner! ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [December 20, 2009, 8:21pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/108 "2009-12-20T20:21:22Z")
I will be. The car is not going to be a drag racing car but should still be fun. Im modifying the rockers so if i want to push that 260ish WHP i can with a simple cam swap. I still want a TDI ---
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [December 20, 2009, 8:24pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/109 "2009-12-20T20:24:29Z")
> [@Official Playoff Beard Thread](https://forums.speedlife.net/t/official-playoff-beard-thread/27535/23): > > I still want a TDI theres an MK3 blue jetta with 220k yr 97 or 98 for 2500. ---
**Author:** ![DB2\_GS-R](https://avatars.discourse-cdn.com/v4/letter/d/a87d85/32.png) [@DB2\_GS-R](https://forums.speedlife.net/u/DB2_GS-R)\ **Post date:** [December 21, 2009, 8:26am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/110 "2009-12-21T08:26:55Z")
> [@Official Playoff Beard Thread](https://forums.speedlife.net/t/official-playoff-beard-thread/27535/23): > > I will be. The car is not going to be a drag racing car but should still be fun. Im modifying the rockers so if i want to push that 260ish WHP i can with a simple cam swap. I still want a TDI Are you getting it tuned at Morgans shop or going somewhere else? ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [December 21, 2009, 10:13am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/111 "2009-12-21T10:13:39Z")
> [@So what's next?](https://forums.speedlife.net/t/so-whats-next/27543/138): > > Are you getting it tuned at Morgans shop or going somewhere else? I might dyno there for shits and giggles. The motor will be tuned elsewhere. A few tuners have actually pmd me wanting to take a stab at it. Most likely going to either evans, Derek at innovative or mike@elite tuning depending on funds. ---
**Author:** ![Auto0utcast1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/auto0utcast1/32/6546_2.png) [@Auto0utcast1](https://forums.speedlife.net/u/Auto0utcast1)\ **Post date:** [December 21, 2009, 10:32am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/112 "2009-12-21T10:32:14Z")
out of curiosity, why not let synapse tune it? they have a great rep and morgan is a hell of a tuner. i realize its preference… just curious about reasoning. ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [December 21, 2009, 11:42am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/113 "2009-12-21T11:42:00Z")
> [@On another topic](https://forums.speedlife.net/t/27490/10): > > out of curiosity, why not let synapse tune it? they have a great rep and morgan is a hell of a tuner. i realize its preference… just curious about reasoning. Preference. EDIT: Im not bagging on synapse in any way. They build some fast cars. However they have not seen a setup like mine yet. Whereas if i go to evans, mike, d-rob… I know theyre familiar with my setup and completely know what to do with the cam angles, A/f, and VTC. Again i will dyno at synapse at some point i know morgan does great work but i just feel its right to be tuned at one of these other shops. ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [December 21, 2009, 8:42pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/114 "2009-12-21T20:42:59Z")
Some pics from the final day of disassembly. ![http://i183.photobucket.com/albums/x194/dkid15/engine003.jpg](http://i183.photobucket.com/albums/x194/dkid15/engine003.jpg) ![http://i183.photobucket.com/albums/x194/dkid15/engine002.jpg](http://i183.photobucket.com/albums/x194/dkid15/engine002.jpg) ![http://i183.photobucket.com/albums/x194/dkid15/engine001.jpg](http://i183.photobucket.com/albums/x194/dkid15/engine001.jpg) Tommorow i will use carb cleaner to remove the excess honda bond. Hopefully ill finally get the rockers shaved. Also purchased today from honda 4 yellow rod bearings 4 red green rod bearings 10 blue main bearings Oem thrust washers Oil seal From CRSX camshaft alignment tool 3 tubes honda bond clevite plastiguage Blueprint head studs I officially have eveything needed to finish the motor. I should have all parts by the day after xmas. Hopefully. ---
**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\ **Post date:** [December 21, 2009, 8:46pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/115 "2009-12-21T20:46:13Z")
J squared is not looking too keen on this project ---
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [December 21, 2009, 8:49pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/116 "2009-12-21T20:49:14Z")
> [@nyspeed help me decide!](https://forums.speedlife.net/t/nyspeed-help-me-decide/27573/8): > > J squared is not looking too keen on this project AAHAHAHHHaaa ---
**Author:** ![K20power](https://avatars.discourse-cdn.com/v4/letter/k/41988e/32.png) [@K20power](https://forums.speedlife.net/u/K20power)\ **Post date:** [December 21, 2009, 8:50pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/117 "2009-12-21T20:50:27Z")
Should’ve gotten ARP headstuds & WTF, THREE tubes of Hondabond!!!..I used like half of one of the newest stuff from Keeler. ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [December 21, 2009, 8:50pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/118 "2009-12-21T20:50:54Z")
Hes quitting cars… right… blast explaining to me how the motor wasnt even broken in yet. Example Jiggs : Bob do you know what this is on the bearings? Me : Umm oil? Jiggs: No you retard thats the breakin coat from the factory. Me: Ok im buying new bearings anyway dont mix any of them up Jiggs then fondled with something else and mixed up all the damn bearings. Kid has great potential though. He just needs to exploit his skills as a career. ---
**Author:** ![dkid15](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dkid15/32/6398_2.png) [@dkid15](https://forums.speedlife.net/u/dkid15)\ **Post date:** [December 21, 2009, 8:58pm UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/119 "2009-12-21T20:58:20Z")
> [@nyspeed help me decide!](https://forums.speedlife.net/t/nyspeed-help-me-decide/27573/9): > > Should’ve gotten ARP headstuds & WTF, THREE tubes of Hondabond!!!..I used like half of one of the newest stuff from Keeler. It doesnt matter i didnt want to run out. Jiggs said the tubes are mad small. I think that blueprint head studs are just as good. I only ran aftermarket headstuds incase i ever wanted to pull the head. Not because i needed the additional protection. ---
**Author:** ![6spd\_ek](https://avatars.discourse-cdn.com/v4/letter/6/45deac/32.png) [@6spd\_ek](https://forums.speedlife.net/u/6spd_ek)\ **Post date:** [December 22, 2009, 1:15am UTC](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070/120 "2009-12-22T01:15:24Z")
whats so different about tuning non-vtec k-series? :ponder [Previous page](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070.md?page=5) [Next page](https://forums.speedlife.net/t/dkid15s-k24-oem-vtec-killer-ep3/248070.md?page=7)