# Do you have an exhaust tubing bender?

**URL:** https://forums.speedlife.net/t/do-you-have-an-exhaust-tubing-bender/234523
**Category:** NYSpeed Automotive
**Created:** [January 13, 2014, 1:00pm UTC](https://forums.speedlife.net/t/do-you-have-an-exhaust-tubing-bender/234523 "2014-01-13T13:00:17Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)
#### Post date: [January 13, 2014, 1:00pm UTC](https://forums.speedlife.net/t/do-you-have-an-exhaust-tubing-bender/234523/1 "2014-01-13T13:00:17Z")

</div>

Need to make (3) 90\* bends and (3) 22.5\* bends in some 1.5" OD exhaust pipe for a bike I’m putting together…I have a 12 ton pump-action pipe bender from Harbor Freight but it simply is not suited for thin-wall tubing like this so I need a quality machine to do this…I would be bringing (6) pieces 12" long to bend real quick like and get out of your hair. Can swap beer for your trouble or something…

---

<div class="post-metadata">

### Author: ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [January 13, 2014, 3:14pm UTC](https://forums.speedlife.net/t/do-you-have-an-exhaust-tubing-bender/234523/2 "2014-01-13T15:14:27Z")

</div>

are you sure the bends can be accomplished with such a short section to hold on to? what I’ve seen requires a fair amount.

---

<div class="post-metadata">

### Author: ![checko](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/checko/32/5422_2.png) [@checko](https://forums.speedlife.net/u/checko)
#### Post date: [January 14, 2014, 8:44pm UTC](https://forums.speedlife.net/t/do-you-have-an-exhaust-tubing-bender/234523/3 "2014-01-14T20:44:05Z")

</div>

It will prolly need to be longer. I wouldn’t cut the 10’ length yet. Bend one then cut, and so on

---

<div class="post-metadata">

### Author: ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)
#### Post date: [January 18, 2014, 5:34am UTC](https://forums.speedlife.net/t/do-you-have-an-exhaust-tubing-bender/234523/4 "2014-01-18T05:34:23Z")

</div>

Txt me. I have a Hook up to a roll bar machine. It might be useful

---

<div class="post-metadata">

### Author: ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [January 18, 2014, 5:52am UTC](https://forums.speedlife.net/t/do-you-have-an-exhaust-tubing-bender/234523/5 "2014-01-18T05:52:38Z")

</div>

I think you’re going to have a hard time bending exhaust tube in even a draw through bender. Why not just buy a few J bends?

---

<div class="post-metadata">

### Author: ![dirtye30](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirtye30/32/7333_2.png) [@dirtye30](https://forums.speedlife.net/u/dirtye30)
#### Post date: [January 18, 2014, 7:16am UTC](https://forums.speedlife.net/t/do-you-have-an-exhaust-tubing-bender/234523/6 "2014-01-18T07:16:05Z")

</div>

theres a mandrel at my shop