# Do you have... **URL:** \ **Category:** SON240sx Automotive\ **Created:** [May 21, 2009, 6:26pm UTC](https://forums.speedlife.net/t/do-you-have/124671 "2009-05-21T18:26:29Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [May 21, 2009, 6:26pm UTC](https://forums.speedlife.net/t/do-you-have/124671/1 "2009-05-21T18:26:29Z")
Okay. I have been searching for 5 days steady now. In all my free time to find information about something extremely simple. I need to know the measurements on a 300zx N/A 5-speed transmissions input shaft. I need a measurement of the spline part (diameter) and the pilot bushing part (diameter) A clutch alignment tool will work as well. I would also like to know if anyone has ever swapped over a main drive shaft (inside transmission) Only the end piece though (the input shaft) Looks to me like it can be swapped over. Although I do not want to tear into my mint KA tranny too much if it will not work. I am having an issue with getting the correct transmission. I finally have an RB20 transmission. Yet my father and myself sincerely believe that the input shaft on my current transmission (in the car now) is bigger. The input shaft on the RB tranny I just got measures exactly the same as KA and SR. For the life of me I can NOT find the alignment tool for the 300zx N/A clutch. If it comes down to it, I will slide my transmission out and measure. Hopefully it is the same, otherwise I’ll start breaking shit on my car for sure lol. So my main question is; Do you have a clutch alignment tool for a 300zx N/A 5-speed. Or the measurements I mentioned above. Bing, Roast and Gonad; If this is in the wrong section…move it. I don’t really find this technical at all. I also thought it would get more attention here. To everyone else. I apologize for opening a stupid ass thread like this. Yet I need an answer, soon. Starting to pop out of gear now. ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [May 21, 2009, 6:28pm UTC](https://forums.speedlife.net/t/do-you-have/124671/2 "2009-05-21T18:28:31Z")
I forgot to mention. My transmission (in the car now) has RB 71C stamped on the side. The RB transmission I got yesterday has RP 71C stamped on the side. ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [May 22, 2009, 8:02am UTC](https://forums.speedlife.net/t/do-you-have/124671/3 "2009-05-22T08:02:15Z")
Anyone…at all? No one has the alignment tool? ---
**Author:** ![DTS](https://avatars.discourse-cdn.com/v4/letter/d/8491ac/32.png) [@DTS](https://forums.speedlife.net/u/DTS)\ **Post date:** [May 22, 2009, 11:20am UTC](https://forums.speedlife.net/t/do-you-have/124671/4 "2009-05-22T11:20:55Z")
Do you like VTEC too? ---
**Author:** ![FUNGC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fungc/32/5539_2.png) [@FUNGC](https://forums.speedlife.net/u/FUNGC)\ **Post date:** [May 22, 2009, 11:48am UTC](https://forums.speedlife.net/t/do-you-have/124671/5 "2009-05-22T11:48:39Z")
i dunno if this would help, but the input shaft of the RB20 tranny and the KA/SR tranny should be the same measurements. this is because on [KA-T.org](http://KA-T.org), i read a few people running a RB20 twin plate clutch on the KA24DE with a KA tranny. or people even do RB flywheel, and 350z clutch setup on the KA tranny. so im guessing all those input shafts should be the same measurements. hope this bit of info will help you out. ---
**Author:** ![Osad](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@Osad](https://forums.speedlife.net/u/Osad)\ **Post date:** [May 22, 2009, 11:57am UTC](https://forums.speedlife.net/t/do-you-have/124671/6 "2009-05-22T11:57:05Z")
Why don’t you try some Z forums? Even TNC. Contact Popcorn or Angie, you’re brampton crew knows howto contact them both. Peter, Chris, Ted… ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [May 22, 2009, 12:04pm UTC](https://forums.speedlife.net/t/do-you-have/124671/7 "2009-05-22T12:04:29Z")
> [@On another topic](https://forums.speedlife.net/t/22081/2): > > Do you like VTEC too? 😕 ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [May 22, 2009, 12:05pm UTC](https://forums.speedlife.net/t/do-you-have/124671/8 "2009-05-22T12:05:33Z")
> [@Initial D This Week](https://forums.speedlife.net/t/initial-d-this-week/22051/23): > > i dunno if this would help, but the input shaft of the RB20 tranny and the KA/SR tranny should be the same measurements. this is because on [KA-T.org](http://KA-T.org), i read a few people running a RB20 twin plate clutch on the KA24DE with a KA tranny. or people even do RB flywheel, and 350z clutch setup on the KA tranny. > > so im guessing all those input shafts should be the same measurements. hope this bit of info will help you out. I’ve read that too. Just, for whatever reason we remember the shaft being bigger. Find out tonight…if I have the time. ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [May 22, 2009, 12:06pm UTC](https://forums.speedlife.net/t/do-you-have/124671/9 "2009-05-22T12:06:50Z")
> [@Osad"](#): > > Why don’t you try some Z forums? Even TNC. > > Contact Popcorn or Angie, you’re brampton crew knows howto contact them both. Peter, Chris, Ted… Because I am tired of people telling me they ARE the same. I want measurements, pictures, or just a god damn alignment tool. lol I have looked on Z forums. Peter told me they are the same The rest of them will do the same thing/ ---
**Author:** ![TorontoGT-R33](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/torontogt-r33/32/5500_2.png) [@TorontoGT-R33](https://forums.speedlife.net/u/TorontoGT-R33)\ **Post date:** [May 22, 2009, 3:26pm UTC](https://forums.speedlife.net/t/do-you-have/124671/10 "2009-05-22T15:26:59Z")
Call Nizztex ask for Amo he might be able to help you out, he is a Nissan specialist. Good luck! [www.nizztex.com](http://www.nizztex.com) 416-245-4964 ---
**Author:** ![Hector](https://avatars.discourse-cdn.com/v4/letter/h/43a26b/32.png) [@Hector](https://forums.speedlife.net/u/Hector)\ **Post date:** [May 22, 2009, 8:40pm UTC](https://forums.speedlife.net/t/do-you-have/124671/11 "2009-05-22T20:40:55Z")
google took 12 seconds … not gonna be a dick but …NOOB u can just send me a check or money order 🙂 Application: Nissan 300ZX 1983-96 (Tool #01) Pilot dia. inch: 0.625 Pilot dia. Metric: 15.875 Spline count: 24 Spline decimal: 1 Spline inch: 1 Spline metric: 25.4 Application: Nissan 240SX 1989-98 (Tool #01) Pilot dia. inch: 0.625 Pilot dia. Metric: 15.875 Spline count: 24 Spline decimal: 1 Spline inch: 1 Spline metric: 25.4Application: Nissan 350ZX 2003-06 (Tool #01) Pilot dia. inch: 0.625 Pilot dia. Metric: 15.875 Spline count: 24 Spline decimal: 1 Spline inch: 1 Spline metric: 25.4Application: Nissan Xterra 2000-04 (Tool #01) Pilot dia. inch: 0.625 Pilot dia. Metric: 15.875 Spline count: 24 Spline decimal: 1 Spline inch: 1 Spline metric: 25.4 [http://www.clutchtools.com](http://www.clutchtools.com) ----- almost silly now dont cha think ? and almost seems that almost all nissan have the same specs … whodathunkethmm ---
**Author:** ![DTS](https://avatars.discourse-cdn.com/v4/letter/d/8491ac/32.png) [@DTS](https://forums.speedlife.net/u/DTS)\ **Post date:** [May 22, 2009, 9:21pm UTC](https://forums.speedlife.net/t/do-you-have/124671/12 "2009-05-22T21:21:25Z")
> [@TRADE: 1GB MiniSD for MicroSD](https://forums.speedlife.net/t/trade-1gb-minisd-for-microsd/22127/3): > > 😕 😕 ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [May 22, 2009, 9:36pm UTC](https://forums.speedlife.net/t/do-you-have/124671/13 "2009-05-22T21:36:43Z")
Wow…thanks Hector. To think. [Clutchtools.com](http://Clutchtools.com) wow… Anyways. It’s all said and done now. After piecing together a transmission to save myself money. I had to take it back out because an RB bell housing with a KA gear box prevails 2" inches too long. So I slammed the RB20 trans in it. 3 hours of non stop bullshit tonight. Swapping bell housings, sensors, seals, clutch forks, ball studs, throw out bearings etc etc etc So yea, she’s good. Thanks again to TorontoJDM. If anyone is wondering wtf happened to my tranny. Well. Third gear (of course) got hit REAL hard racing a 2JZ at cayuga. Took apart the tranny and found a HUGE chunk of aluminum. Ended up being part of the shifter fork!!! 😃 Atleast I beat him…that race 🙂 Thanks everyone. Sorry for being a fuckin moron. ---
**Author:** ![DTS](https://avatars.discourse-cdn.com/v4/letter/d/8491ac/32.png) [@DTS](https://forums.speedlife.net/u/DTS)\ **Post date:** [May 23, 2009, 7:34pm UTC](https://forums.speedlife.net/t/do-you-have/124671/14 "2009-05-23T19:34:51Z")
Knew you didn’t like VTEC, who was I kidding. ---
**Author:** ![driftRPS13](https://avatars.discourse-cdn.com/v4/letter/d/8edcca/32.png) [@driftRPS13](https://forums.speedlife.net/u/driftRPS13)\ **Post date:** [May 24, 2009, 3:54pm UTC](https://forums.speedlife.net/t/do-you-have/124671/15 "2009-05-24T15:54:26Z")
> [@so who can tell me about air injection anti-lag ? (EGR antilag)](https://forums.speedlife.net/t/so-who-can-tell-me-about-air-injection-anti-lag-egr-antilag/22110/2): > > Knew you didn’t like VTEC, who was I kidding. bahahaha