# Domination Chassis
**URL:** https://forums.speedlife.net/t/domination-chassis/171307
**Category:** PittSpeed Off Topic
**Created:** [December 26, 2004, 9:36pm UTC](https://forums.speedlife.net/t/domination-chassis/171307 "2004-12-26T21:36:41Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Dom\_Chassis](https://forums.speedlife.net/u/Dom_Chassis)
#### Post date: [December 26, 2004, 9:36pm UTC](https://forums.speedlife.net/t/domination-chassis/171307/1 "2004-12-26T21:36:41Z")
Ok girls, so you finnally built that car. You think it is quick and, lets face it, you like to show off.
Ok, so in reality you just want to be safe, and follow the rules. You need a cage. You could order a Competition Engineering kit and hope it fits, plus pay a welder to install it. Or you could come down to Domination Chassis and have us build you a custom cage.
Please allow me to introduce myself. I am Dave, I am a buisness partner at Domination Chassis. We are a chassis shop located in Carnegie, PA. We have been in business for over a year, doing mostly roll cages. We got flooded real bad back in September (the water reached 5ft high in the shop) Now that we have cleaned up and the buisiness got back on its feet, we are ready to take on more buisiness as we are expanding.
We have done alot of SCCA, NASA, Honda Challenge, Drag, and Dirt Circle Track cars. We can work with any type of tubing, HREW, DOM, Chromoly, and everything in between. If you, or any one you know is looking or thinking about a cage give us a call. We garantee higher quality, quicker turnaround, and lower cost. Our customers know more than we do. The customer knows what they want. We wont try to convince you otherwise unless you ask us our proffessional opinions. Our cages are tried and true, we built a dirt car for a guy and he rolled it a few times, over the fence, end over end. He walked away. We have done many cages for the folks at [www.racepa.com](http://www.racepa.com).
Here are some pics of cars that we have done. We also do general welding, repair, suspention mods, all the way to custom engines. Myself and my partner both have an associate’s degree in The Applied Science of High Performance Automotive. We have gone to School for this, we live this, and we breathe this. Give us a call, or stop down to the shop and see us. We welcome visitors and customers.
Dave
Domination Chassis
412-999-1910
[www.dominationchassis.com](http://www.dominationchassis.com)
BMW 328i as per customer specs
1st Gen RX7 back half
Nissan 240 SX S-13 Back Half
Honda CRX for Honda Challenge
Ford Focus
Take a look at our web site for more pictures of cars we have done. This is just a few pics of cars that we have recently done.
(On a side note, I’m the GM G-Body guy in the shop) 😃
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 27, 2004, 4:39am UTC](https://forums.speedlife.net/t/domination-chassis/171307/2 "2004-12-27T04:39:27Z")
glad to see ur back up after the flood!😃
---
### Author:  [@starboy](https://forums.speedlife.net/u/starboy)
#### Post date: [December 27, 2004, 4:51am UTC](https://forums.speedlife.net/t/domination-chassis/171307/3 "2004-12-27T04:51:11Z")
very nice work
---
### Author:  [@GNocide](https://forums.speedlife.net/u/GNocide)
#### Post date: [December 27, 2004, 5:59am UTC](https://forums.speedlife.net/t/domination-chassis/171307/4 "2004-12-27T05:59:38Z")
> [@8.1crew](#):
>
> glad to see ur back up after the flood!😃
welcome and nice welds!!!
---
### Author:  [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)
#### Post date: [December 27, 2004, 6:51am UTC](https://forums.speedlife.net/t/domination-chassis/171307/5 "2004-12-27T06:51:51Z")
This is going to be off-topic to street cars, but. . .
I have this:
and want to do something like this:
internal cage…this guys looks half decent:
i’d want the roof X’d, not straight bar’d
I can’t find any good pics of the back bob’d, but if your good, give me a ball park idea on tubing the front and full internal cage, also utilizing coilover mounts in the back.
also…willl you sell me just the tubing if I want to make my own stuff?
---
### Author:  [@Dom\_Chassis](https://forums.speedlife.net/u/Dom_Chassis)
#### Post date: [December 27, 2004, 8:23am UTC](https://forums.speedlife.net/t/domination-chassis/171307/6 "2004-12-27T08:23:04Z")
So want us to do an exo-skeletan on the front, and full cabin protection…
Well, I need to know what kind of tubing you want, how big, how much you are ready to spend, etc. And yes, we will sell tubing from our stock. All of our tubing comes in 20ft sticks. We can cut if so desired. PM me or call us…
Dave
Domination Chassis
412-999-1910
[www.dominationchassis.com](http://www.dominationchassis.com)
---
### Author:  [@German\_with\_a\_Bowtie](https://forums.speedlife.net/u/German_with_a_Bowtie)
#### Post date: [December 28, 2004, 3:55am UTC](https://forums.speedlife.net/t/domination-chassis/171307/7 "2004-12-28T03:55:54Z")
Fellow G body guy here,
$ for a NHRA legal 8 point in an 87 Regal…
Approx turnaround time…
Is car kept secure while onsite…
Thanks,
Barry
---
### Author:  [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)
#### Post date: [December 28, 2004, 7:14am UTC](https://forums.speedlife.net/t/domination-chassis/171307/8 "2004-12-28T07:14:59Z")
> [@Dom Chassis](#):
>
> So want us to do an exo-skeletan on the front, and full cabin protection…
> Well, I need to know what kind of tubing you want, how big, how much you are ready to spend, etc. And yes, we will sell tubing from our stock. All of our tubing comes in 20ft sticks. We can cut if so desired. PM me or call us…
>
> Dave
> Domination Chassis
> 412-999-1910
> [www.dominationchassis.com](http://www.dominationchassis.com)
I was thinking 1.75" .120 wall DOM inside and maybe step it up to 2" on the outside.
How much per stick of .120 wall 1.75" DOM?
---
### Author:  [@Dom\_Chassis](https://forums.speedlife.net/u/Dom_Chassis)
#### Post date: [December 28, 2004, 9:43am UTC](https://forums.speedlife.net/t/domination-chassis/171307/9 "2004-12-28T09:43:20Z")
> [@GeneralG](#):
>
> Fellow G body guy here,
>
> $ for a NHRA legal 8 point in an 87 Regal…
>
> Approx turnaround time…
>
> Is car kept secure while onsite…
>
> Thanks,
> Barry
What do you want as far as 8-point? Do you want an 8-point roll bar? or a cage? The 8 pt bar is Two rear legs, Main hoop, Two kickers off of main hoop, Two door bars.
Or do you want a cage. Which is two rear legs, Main Hoop, Door Bars, A-pillars and halo.
We can do one or the other, the cage will cost more as we have to use more tubing, and time to bend it.
NHRA will alow you to use HREW tubing. We have this in stock as well as DOM which is the next step up, Or if you want to save as much weight as you can, we can get Chro-mo tubing.
As far as turn around, regardless of how we do the cage, in and out in under a week. And yes the car would be locked in the shop every night.
We had a cancellation this week, if you are ready to do it we could have it done by monday.
---
### Author:  [@imported\_SINISTER](https://forums.speedlife.net/u/imported_SINISTER)
#### Post date: [December 28, 2004, 9:50am UTC](https://forums.speedlife.net/t/domination-chassis/171307/10 "2004-12-28T09:50:27Z")
[awsome guys glad to see you made it back after the flood
glad to see you on the site :blue:
---
### Author:  [@1320](https://forums.speedlife.net/u/1320)
#### Post date: [December 29, 2004, 9:22am UTC](https://forums.speedlife.net/t/domination-chassis/171307/11 "2004-12-29T09:22:08Z")
Hopefully Jason from hybridynamics and myself will have our 240sx’s down there for you to do asap. Give you a call soon.
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [December 29, 2004, 10:32am UTC](https://forums.speedlife.net/t/domination-chassis/171307/12 "2004-12-29T10:32:59Z")
> [@unicorn](#):
>
> Hopefully Jason from hybridynamics and myself will have our 240sx’s down there for you to do asap. Give you a call soon.
I hope I am fast this year so I can have a cage put in too.
from what jay has told me these guys know what they are doing and anyone who needs a cage should check em out since they are one of the only places that will do it in the area
---
### Author:  [@Gray05](https://forums.speedlife.net/u/Gray05)
#### Post date: [December 29, 2004, 11:49pm UTC](https://forums.speedlife.net/t/domination-chassis/171307/13 "2004-12-29T23:49:10Z")
I’m also looking very soon for a Cage in Chrom-Mo. 03 Mustang Cobra
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 30, 2004, 5:03am UTC](https://forums.speedlife.net/t/domination-chassis/171307/14 "2004-12-30T05:03:28Z")
how much for a 6 point cage for a hatchback fox body mustang. i want the side bars to be kick down for easy access into the car. also do you make subframe connectors? and if you do would it be possible to tie the cage into the subframes
---
### Author:  [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)
#### Post date: [December 30, 2004, 9:37am UTC](https://forums.speedlife.net/t/domination-chassis/171307/15 "2004-12-30T09:37:47Z")
> [@Blue4](#):
>
> I’m also looking very soon for a Cage in Chrom-Mo. 03 Mustang Cobra
say good-bye to the Benjamins…
---
### Author:  [@Gray05](https://forums.speedlife.net/u/Gray05)
#### Post date: [December 30, 2004, 9:59pm UTC](https://forums.speedlife.net/t/domination-chassis/171307/16 "2004-12-30T21:59:05Z")
> [@gearhead](#):
>
> say good-bye to the Benjamins…
no kidding
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [December 30, 2004, 10:28pm UTC](https://forums.speedlife.net/t/domination-chassis/171307/17 "2004-12-30T22:28:16Z")
> [@Blue4](#):
>
> no kidding
if you are goin to do it though do it with the works
---
### Author:  [@Dom\_Chassis](https://forums.speedlife.net/u/Dom_Chassis)
#### Post date: [December 31, 2004, 8:38am UTC](https://forums.speedlife.net/t/domination-chassis/171307/18 "2004-12-31T08:38:32Z")
> [@Quik](#):
>
> how much for a 6 point cage for a hatchback fox body mustang. i want the side bars to be kick down for easy access into the car. also do you make subframe connectors? and if you do would it be possible to tie the cage into the subframes
Youll have to bring the car down so we can a look at it. Yes, we can make subframe connectors for anything. We custom make all the subframe connectors that we install. As far as pricing goes, again you’d have to bring it down because all prices are subject to change due to the cost of steel.
---
### Author:  [@Dom\_Chassis](https://forums.speedlife.net/u/Dom_Chassis)
#### Post date: [December 31, 2004, 8:41am UTC](https://forums.speedlife.net/t/domination-chassis/171307/19 "2004-12-31T08:41:19Z")
> [@Blue4](#):
>
> I’m also looking very soon for a Cage in Chrom-Mo. 03 Mustang Cobra
Just let us know when you want it done. We will need a couple days advanced notice so we can get the chro-mo in. We dont stock it, we ran out of room on the rack. lol
---
### Author:  [@Gray05](https://forums.speedlife.net/u/Gray05)
#### Post date: [December 31, 2004, 8:55am UTC](https://forums.speedlife.net/t/domination-chassis/171307/20 "2004-12-31T08:55:42Z")
> [@Dom Chassis](#):
>
> Just let us know when you want it done. We will need a couple days advanced notice so we can get the chro-mo in. We dont stock it, we ran out of room on the rack. lol
I ran into someone yesterday, says he knows you, or your sister or something. Name is George, younger guy.
[Next page](https://forums.speedlife.net/t/domination-chassis/171307.md?page=2)