# Dont know what to do first!!

**URL:** <https://forums.speedlife.net/t/dont-know-what-to-do-first/109804>\
**Category:** SON240sx Automotive\
**Created:** [September 26, 2007, 10:02pm UTC](https://forums.speedlife.net/t/dont-know-what-to-do-first/109804 "2007-09-26T22:02:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Driftime\_240sx](https://avatars.discourse-cdn.com/v4/letter/d/46a35a/32.png) [@Driftime\_240sx](https://forums.speedlife.net/u/Driftime_240sx)\
**Post date:** [September 26, 2007, 10:02pm UTC](https://forums.speedlife.net/t/dont-know-what-to-do-first/109804/1 "2007-09-26T22:02:37Z")

</div>

😕…heres the deal, i have a 93 240sx with 280 000 kms on it and a pretty much busted tranny, And the other this is the front driver/passanger frame rails are rusted and rotten…so the question here is what should the plan be…to go ahead with the engine swap i was planning on and then do the under body or is it important to have the underbody wealded and boxed in before i do the swap?

---

<div class="post-metadata">

**Author:** ![Osad](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@Osad](https://forums.speedlife.net/u/Osad)\
**Post date:** [September 26, 2007, 10:11pm UTC](https://forums.speedlife.net/t/dont-know-what-to-do-first/109804/2 "2007-09-26T22:11:47Z")

</div>

Do both. I’d say do the frame work first, just as a precaution.

---

<div class="post-metadata">

**Author:** ![Multisynclg](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/multisynclg/32/5328_2.png) [@Multisynclg](https://forums.speedlife.net/u/Multisynclg)\
**Post date:** [September 26, 2007, 11:38pm UTC](https://forums.speedlife.net/t/dont-know-what-to-do-first/109804/3 "2007-09-26T23:38:30Z")

</div>

strip your chassis down  
clean it up  
i garantee it is disgusting once you get it naked  
fix it, paint it , seal it, build it for a successful car that you wont want to sell from headaches months later.

---

<div class="post-metadata">

**Author:** ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)\
**Post date:** [September 26, 2007, 11:59pm UTC](https://forums.speedlife.net/t/dont-know-what-to-do-first/109804/4 "2007-09-26T23:59:36Z")

</div>

i rolled on a shit frame rail with a sr for about 2 weeks.  
i know a shop that more then enough 240 guys on here have gotten work done for cheap and quality. 200 for a rail and floor pan.  
if u wanna contact me i can get the info or you can just search my post’s i have posted his contact and address plenty of times, he is also a referred insurance place. quality work. and he is cool as fuck 🙂