Drones

It can handle the wind surprisingly well. 3s power, carbon fiber and strong brushless motors help a lot. It’s around 75 grams with a 3s 300 battery so it’s chunky compared to a little 1s brushed motor TinyWhoop class.

My Tinyhawk S gets here Thursday and while it’s about the same dimensions it’s only around 40 grams with the 1s 450 so it won’t handle the wind well but it will be way more fun to bash around inside (fully enclosed props).

1 Like

if you are looking to get a little crazy with it I have a 200QX

brushless motors, 250 sized CF racing frame, runs on 2s, maybe also 3s i’d have to look it up, 3d props and normal props included.

get to flying inverted, join the real fun

Getting better all the time. Hung a hula hoop from a branch as an obstacle.

I was expecting you to do a pass between the porch columns, lol. That thing hauls.

I’ve made it between the columns and the house several times but on that flight I was standing in a bad spot to try it.

It’s getting fast. That vid had all the controls, including throttle still mixed to 75%, and even then I’m not going full throttle.

Only did one short outdoor flight today. The wind was pushing it around a little too much for how many things there are to crash into. Instead Jill and I ripped the Tinyhawk around our indoor race course. I need to get a DVR for my goggles so I can record those flights.

Have you crashed yet at speeds like you have in this video? Curious the abuse this takes now that you are flying it faster.
Looks like a pretty solid flyer. How much did the entire setup cost you if you don’t mind. Quad, goggles, controller. (don’t need exacts but a ballpark number)
Thanks

I went high speed into the sided part of my house the other day. Not a glancing blow, dead straight on to a full stop. I was ripping between the white posts and the house and forgot the garage roof sticks out so far and just drilled it. It dislodged the VTX board from it’s rubber mounts and I had to take it inside to loosen everything up so I could pop the board back in. Zero frame damage, zero prop damage. In that last vid I posted you can see where I nailed the hula hoop and didn’t even stop flying. I’ve had several other crashes into tree branches and the ground and I’ve just brushed it off, set it back on the driveway and went right back to flying.

If you want to start out, I’d really recommend the Tinyhawk S over the Larva X. The Tinyhawk is smaller and more durable. It’s just as much fun to fly but it’s much more forgiving. As a huge plus when the weather sucks the Tinyhawk is a blast to fly around the house and because the props are enclosed and it’s outer shell is flexible you don’t have to worry about wrecking your house. The Larva X is carbon fiber, runs on 3s lipos instead of 1s or 2s lipos and is really only good outdoors. I don’t have any video of the Tinyhawk just because it doesn’t have onboard DVR and I haven’t added DVR to my goggles yet. The Larva can fly in winds the Tinyhawk can’t, but if it’s decently calm (10mph or under) I have more fun flying the Tinyhawk in my back yard using my kid’s fort as an obstacle course than I do flying the Larva X. Must more than 10mph it’s honestly not much fun flying either outdoors because all you can do is fly the Larva around above all the obstacles and that gets boring. The Tinyhawk also has turtle mode, which is amazing. You crash the quad somewhere and it ends up upside down. Flip the disarm switch on the radio, flip the turtle mode switch, re-arm the quad and when you use the right stick it runs the motors in reverse, in pairs, so it will flip the quad back upright. Once it flips, disarm, turn off turtle mode, re-arm and fly away. You can’t do this with an exposed prop quad so you have to get up and manually flip it over any time you crash.

Figure around $400 to get all in with gear you’ll be able to use going forward, less if you search around for the best price or find shit on sale (the goggles were $79 and radio $89 when I bought, now they’re $95 and $99). Or buy an RTF Tinyhawk kit for $165. That’s the original Tinyhawk, not the S. The S can be run on 2s cells when you want more power. The problem with the kit is you’re unlikely to ever use that radio or charger for any future quads.

My recommendation:

Radio:

Quad (Tinyhawk S):

Or:
Quad (Larva X):

Goggles:


These are not top of the line goggles. In fact, I guess they’re not really goggles at all since it’s really a headset with 2 mirrors to reflect the little screen directly in front of your face, but the reviews are great, they’re super cheap and the range and video quality is excellent. They’re on several youtubers lists for starter FPV.

Charger:
I had an Onyx 235 from my old heli days and it’s a nice lipo balance charger. I went to Fields because I needed some difference balance adapters and they had a nice $40 balance charger that came with all the leads I needed and by the time I bought the leads separate I just bought their charger. It’s been nice having two chargers so I can charge quad batteries and my radio or goggle batteries at the same time. Either way, figure $40 for a basic balance charger. I’ll update this with a link to the one I bought at fields when I get home because I forgot the model.

Batteries:

For the Tinyhawk:

For the Larva X:

For the goggles:

For the radio:

Misc:
Parallel charge board so you can charge a bunch of quad batteries at once:

2 Likes

One last note, on goggles, I would recommend spending as little as possible because DJI really changed the game with their recently introduced digital FPV system. It’s expensive right now, but I guarantee you there are shops all over China tearing down DJI’s system and in the next year you’re going to see ripoffs of DJI’s system cheap on Banggood and GetFPV.

Check out comparison here:

Great random freestyle vid that showed up in my youtube feed today because I’ve been watching so many drone vids…

2 Likes

Holy shit. Now I know why you dial back the speed, lol.

That’s incredible

Good review of the Skydio 2. I’d buy this in a heartbeat if it was waterproof to get some amazing skiing shots.

1 Like

Not bad

I want to see a Mr Steel vs that laser targeting system video. My money is on Steel.

Couldn’t fly the Larva X in the winter because all the electronics are exposed and if it goes down in the snow the boards are hot enough to instantly melt the snow and then short out. Plus one snowless day in Dec at Bassett park I was doing circuits around the walking path and side slid hard into a bush and ripped the wires clean out of one of my motors. Ordered the upgrade kit with the new frame and slightly hotter motors and it’s just sat ever since.

Fast forward to being locked in my house and decided to tear it down and swap all the components to the new frame with the 4 new motors. Been a while flying outside with wind and lot more power than my tiny indoor quad but it came back pretty fast. Other than hitting the tree at 0:50. :slight_smile:

2 Likes

Man I was just thinking of going out to fly mine because who’s going to stop me, lol.

Getting better at this.

1 Like

Had me nervous in a few spots there, lol. I would have LOL’ed if you had crashed into yourself :upside_down_face:

Watching the replay the only really risky one was where I JUST cleared that teak drink cart going over the pool. Had I clipped it at that speed the crash likely would have ended up in the pool and fried all the electronics. All the other stuff I got close to (like that near miss on my neighbors basketball hoop) worst case I might have broke a part but it would have been a cheap fix.

And yes, I’ve come way to close to crashing it into myself a few times. One I felt it move my hair.