# Dynoed the Trans Am **URL:** \ **Category:** PittSpeed Off Topic\ **Created:** [May 13, 2005, 5:42pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299 "2005-05-13T17:42:30Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [May 13, 2005, 5:42pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/1 "2005-05-13T17:42:30Z")
357 hp, 310 ft-lb Not too bad, about what I was expecting. That number is maybe a few hp high since it was kind of a peak. Might be a few more to squeeze out with a little better tune. Checked a/f on both banks separately - until a rocker arm loosened up. :doh: Call up Hybrid and get in on the fun! ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [May 13, 2005, 5:44pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/2 "2005-05-13T17:44:57Z")
damn! Nice numbers jeff! ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [May 13, 2005, 6:01pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/3 "2005-05-13T18:01:43Z")
congrats ---
**Author:** ![Gray05](https://avatars.discourse-cdn.com/v4/letter/g/cc9497/32.png) [@Gray05](https://forums.speedlife.net/u/Gray05)\ **Post date:** [May 13, 2005, 6:03pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/4 "2005-05-13T18:03:07Z")
nice numbers man ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [May 13, 2005, 6:13pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/5 "2005-05-13T18:13:51Z")
🆒 congrats,was there much differants between side on a/f? ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [May 13, 2005, 7:47pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/6 "2005-05-13T19:47:44Z")
> [@PewterSS](#): > > 🆒 congrats,was there much differants between side on a/f? Somewhat, but I only got one partial run on the right side before the rocker arm came loose. Red is left bank, blue is right bank. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [May 14, 2005, 4:09am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/7 "2005-05-14T04:09:23Z")
> [@Jeff95TA](#): > > Somewhat, but I only got one partial run on the right side before the rocker arm came loose. > > Red is left bank, blue is right bank. so two not a bad idea? ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [May 14, 2005, 5:44am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/8 "2005-05-14T05:44:57Z")
Yeah, it was a good idea. One of the plugs stripped out a little though, caught a burr or something. Jay said he’ll thank you later. 🙂 I don’t know if PCMforless can tweak too much by mail without having the car, but I’ll see what he says. ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [May 14, 2005, 5:46am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/9 "2005-05-14T05:46:15Z")
sweet jeff…congrats!!! ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [May 14, 2005, 7:06am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/10 "2005-05-14T07:06:38Z")
> [@Jeff95TA](#): > > Yeah, it was a good idea. One of the plugs stripped out a little though, caught a burr or something. Jay said he’ll thank you later. 🙂 > > . explain! ---
**Author:** ![SonofaBish](https://avatars.discourse-cdn.com/v4/letter/s/ad7895/32.png) [@SonofaBish](https://forums.speedlife.net/u/SonofaBish)\ **Post date:** [May 14, 2005, 7:36am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/11 "2005-05-14T07:36:06Z")
very very nice! what kinda numbers does it run at the track? ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [May 14, 2005, 8:08am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/12 "2005-05-14T08:08:17Z")
> [@PewterSS](#): > > explain! It was nothing, just had to clean up the threads a little when it stripped. Probably got tight from the heat. Just yanking your chain. ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [May 14, 2005, 8:09am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/13 "2005-05-14T08:09:42Z")
> [@SonofaBish](#): > > very very nice! what kinda numbers does it run at the track? 13.77 before the heads/cam. Haven’t had it back yet, having problems with the 1-2 shift hitting the rev limiter. Hopefully a programming issue with the shift points and not a tranny problem. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [May 14, 2005, 8:15am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/14 "2005-05-14T08:15:25Z")
> [@Jeff95TA](#): > > It was nothing, just had to clean up the threads a little when it stripped. Probably got tight from the heat. Just yanking your chain. 🙂 ---
**Author:** ![smokeyburnouts](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/smokeyburnouts/32/5987_2.png) [@smokeyburnouts](https://forums.speedlife.net/u/smokeyburnouts)\ **Post date:** [May 14, 2005, 10:48am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/15 "2005-05-14T10:48:22Z")
wow…thats sweet. cant wait to see how it does this year ---
**Author:** ![brokeasskorean](https://avatars.discourse-cdn.com/v4/letter/b/e19b73/32.png) [@brokeasskorean](https://forums.speedlife.net/u/brokeasskorean)\ **Post date:** [May 14, 2005, 10:53am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/16 "2005-05-14T10:53:35Z")
congrats jeff. just as you were trying to pull in i was leaving…haha i saw go back on the road and turn around cause you tried to go up the alley… ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [May 14, 2005, 10:57am UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/17 "2005-05-14T10:57:41Z")
congrats jeff ---
**Author:** ![lt1power](https://avatars.discourse-cdn.com/v4/letter/l/ea666f/32.png) [@lt1power](https://forums.speedlife.net/u/lt1power)\ **Post date:** [May 14, 2005, 3:17pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/18 "2005-05-14T15:17:09Z")
nice numbers. which LE package is this LE1 or LE2? ---
**Author:** ![bics56](https://avatars.discourse-cdn.com/v4/letter/b/47e85d/32.png) [@bics56](https://forums.speedlife.net/u/bics56)\ **Post date:** [May 14, 2005, 3:22pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/19 "2005-05-14T15:22:13Z")
Nice numbers…get that thing to the track and get a 12 sec slip now!! ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [May 14, 2005, 4:10pm UTC](https://forums.speedlife.net/t/dynoed-the-trans-am/174299/20 "2005-05-14T16:10:00Z")
> [@lt1power](#): > > nice numbers. which LE package is this LE1 or LE2? It’s the LE1 cam with the LE2 heads. My numbers are a little lower than what’s possible. I’m assuming it’s because it’s an auto, I have 1 5/8" midlengths, and the tune may be holding back a few ponies. I’d love to put some long tubes on and see how it affects everything across the rpm range. This is always a big debate on the boards. I’m still not convinced that long tubes would affect my 1/4 mile that much that I would be willing to give up my ground clearance and awesome plug access. (I threw that in for Pewter. ;)) [Next page](https://forums.speedlife.net/t/dynoed-the-trans-am/174299.md?page=2)