# Eagle Japan Motor...no good

**URL:** <https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836>\
**Category:** SON240sx Automotive\
**Created:** [April 23, 2009, 2:38pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836 "2009-04-23T14:38:56Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Fobwall](https://avatars.discourse-cdn.com/v4/letter/f/7ea924/32.png) [@Fobwall](https://forums.speedlife.net/u/Fobwall)\
**Post date:** [April 23, 2009, 4:22pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/21 "2009-04-23T16:22:16Z")

</div>

That’s the reason why I’m here on SON. I’ve exposed/called out a lot of scammers to help newbs and have risked my own safety too!

---

<div class="post-metadata">

**Author:** ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)\
**Post date:** [April 23, 2009, 4:25pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/22 "2009-04-23T16:25:59Z")

</div>

front clips save lives.

i feel bad for anyone who buys just a motorset sitting on concrete.

---

<div class="post-metadata">

**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\
**Post date:** [April 23, 2009, 4:28pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/23 "2009-04-23T16:28:15Z")

</div>

I get them to take motor set out of the clip after I see it. Tell them exactly what I want and how I want it. Discuss price, pay then pick up. Makes install VERY easy and I know it runs.

---

<div class="post-metadata">

**Author:** ![Fobwall](https://avatars.discourse-cdn.com/v4/letter/f/7ea924/32.png) [@Fobwall](https://forums.speedlife.net/u/Fobwall)\
**Post date:** [April 23, 2009, 4:30pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/24 "2009-04-23T16:30:07Z")

</div>

> [@87s15lt1"](#):
>
> I get them to take motor set out of the clip after I see it. Tell them exactly what I want and how I want it. Discuss price, pay then pick up. Makes install VERY easy and I know it runs.

They can still easily switch it out for a motorset. The best way to do it is to buy the clip yourself. Start it up and run it for 10 minutes or so to ensure its working fine.

Remove it yourself and then install it into your other chassis.

---

<div class="post-metadata">

**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\
**Post date:** [April 23, 2009, 4:33pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/25 "2009-04-23T16:33:58Z")

</div>

> [@On another topic](https://forums.speedlife.net/t/21669/5):
>
> They can still easily switch it out for a motorset. The best way to do it is to buy the clip yourself. Start it up and run it for 10 minutes or so to ensure its working fine.
> 
> Remove it yourself and then install it into your other chassis.

True, my problem is I trust people to easily.

---

<div class="post-metadata">

**Author:** ![Fobwall](https://avatars.discourse-cdn.com/v4/letter/f/7ea924/32.png) [@Fobwall](https://forums.speedlife.net/u/Fobwall)\
**Post date:** [April 23, 2009, 4:36pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/26 "2009-04-23T16:36:49Z")

</div>

> [@On another topic](https://forums.speedlife.net/t/21669/6):
>
> True, my problem is I trust people to easily.

That’s the problem. =\

---

<div class="post-metadata">

**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\
**Post date:** [April 23, 2009, 4:38pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/27 "2009-04-23T16:38:49Z")

</div>

I know. Yet, I have learned (just in the last day lol) to stick with my two importers.

Riyad for Nissan and Toyota  
Steve @ Engine land for Honda and Subaru.

They both love it when I come by. Huge smiles. Always a pleasure to do business with them. Great deals. And if anything EVER goes wrong. They always help us out.

---

<div class="post-metadata">

**Author:** ![slipperysilvia](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slipperysilvia/32/5485_2.png) [@slipperysilvia](https://forums.speedlife.net/u/slipperysilvia)\
**Post date:** [April 23, 2009, 5:25pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/28 "2009-04-23T17:25:15Z")

</div>

Atleast you got cash back man…many places wont even do that.

next time you know ramesh, buy from me !!

---

<div class="post-metadata">

**Author:** ![lewtz](https://avatars.discourse-cdn.com/v4/letter/l/439d5e/32.png) [@lewtz](https://forums.speedlife.net/u/lewtz)\
**Post date:** [April 23, 2009, 7:52pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/29 "2009-04-23T19:52:38Z")

</div>

im suprised you even bought from them ramesh.

ive been there once and was there a total of 5 minutes before i decided never to come back again. Everything they had was junk.

hope you find a good motor, its about time you got an sr

---

<div class="post-metadata">

**Author:** ![240sxfan](https://avatars.discourse-cdn.com/v4/letter/2/dec6dc/32.png) [@240sxfan](https://forums.speedlife.net/u/240sxfan)\
**Post date:** [April 24, 2009, 2:46pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/30 "2009-04-24T14:46:16Z")

</div>

> [@On another topic](https://forums.speedlife.net/t/21669/8):
>
> Atleast you got cash back man…many places wont even do that.
> 
> next time you know ramesh, buy from me !!

He should have just started with you to begin with!!!

I grabbed my motor from Varun, and a crap loads of parts for my swap, everything was as stated, super smooth transaction and no dicking around. I tested the starter and the alternator before the motor went in and the alternator was bad, called up Varun and within 20 minutes I was at his place getting a new alternator. I never did a compression test as he said he had done it and the motor was good, no reason not to believe him. Two years later, Power FC tuned, 50,000km on an unknown KM motor, stock head gasket and all gaskets, driven hard all the time, 2 drag days one with 15 runs in a row no resting and the second with 26 no resting no cooling off and the car sold just 2 weeks ago with a compession test done reading 150 across the board… now he is getting more money from me for the Z33… why go anywhere else?

---

<div class="post-metadata">

**Author:** ![Polar\_s13](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/polar_s13/32/5572_2.png) [@Polar\_s13](https://forums.speedlife.net/u/Polar_s13)\
**Post date:** [April 25, 2009, 10:45am UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/31 "2009-04-25T10:45:25Z")

</div>

> [@RC Car/Truck thread](https://forums.speedlife.net/t/rc-car-truck-thread/21682/12):
>
> He should have just started with you to begin with!!!
> 
> I grabbed my motor from Varun, and a crap loads of parts for my swap, everything was as stated, super smooth transaction and no dicking around. I tested the starter and the alternator before the motor went in and the alternator was bad, called up Varun and within 20 minutes I was at his place getting a new alternator. I never did a compression test as he said he had done it and the motor was good, no reason not to believe him. Two years later, Power FC tuned, 50,000km on an unknown KM motor, stock head gasket and all gaskets, driven hard all the time, 2 drag days one with 15 runs in a row no resting and the second with 26 no resting no cooling off and the car sold just 2 weeks ago with a compession test done reading 150 across the board… now he is getting more money from me for the Z33… why go anywhere else?

Its true, I bought a front clip plus many many more things and everything is what he said it was…and I dont drive like a granny

---

<div class="post-metadata">

**Author:** ![Gatecrasher3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatecrasher3/32/5617_2.png) [@Gatecrasher3](https://forums.speedlife.net/u/Gatecrasher3)\
**Post date:** [April 26, 2009, 8:05am UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/32 "2009-04-26T08:05:44Z")

</div>

i wish i had an SR… ☹

---

<div class="post-metadata">

**Author:** ![Gatecrasher3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatecrasher3/32/5617_2.png) [@Gatecrasher3](https://forums.speedlife.net/u/Gatecrasher3)\
**Post date:** [April 26, 2009, 8:06am UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/33 "2009-04-26T08:06:16Z")

</div>

WOOO 300th post!

---

<div class="post-metadata">

**Author:** ![imported\_Jared](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_jared/32/5660_2.png) [@imported\_Jared](https://forums.speedlife.net/u/imported_Jared)\
**Post date:** [April 26, 2009, 8:16am UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/34 "2009-04-26T08:16:50Z")

</div>

"He says low compression on the last cylinder is normal "

haha Fail…At least things semi worked out tho

---

<div class="post-metadata">

**Author:** ![TorontoGT-R33](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/torontogt-r33/32/5500_2.png) [@TorontoGT-R33](https://forums.speedlife.net/u/TorontoGT-R33)\
**Post date:** [April 26, 2009, 2:49pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/35 "2009-04-26T14:49:29Z")

</div>

For your next SR20DET purchase I got one word for you and that’s: VARUN

I got my SR20DET type X from him, I let it sit in my garage for over a year before having it installed it in my 240 at Nizztex and it fired up right away without any problem! Even the guys at Nizztex were like WOW! No smoke, no hazitation, no vidrations, nothing! … Just a nice smooth clean start! …Then they took it apart and did the modifications I wanted!

My friend bought a SR20DET from him too and he had no problem either!

These Jap parts guys are hit or miss and when you are spending that kind of money why risk on a hit or miss? You are lucky you got your money back, usualy they would give you a store credit or some shit like that.

---

<div class="post-metadata">

**Author:** ![AhmadG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ahmadg/32/5577_2.png) [@AhmadG](https://forums.speedlife.net/u/AhmadG)\
**Post date:** [April 26, 2009, 10:35pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/36 "2009-04-26T22:35:06Z")

</div>

Threads like these give me deja vu and make me very sad. At least you got your money back man. I didn’t lol.

I appreciate you posting about scammers and bad businesses, this is one major benefit of having a local forum. The first thing I did when I got fucked over was to post.

---

<div class="post-metadata">

**Author:** ![HayMakr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/haymakr/32/5738_2.png) [@HayMakr](https://forums.speedlife.net/u/HayMakr)\
**Post date:** [April 26, 2009, 11:34pm UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/37 "2009-04-26T23:34:54Z")

</div>

the problem with these importers is if your joe blow off the street, they dont give a fuck about you, gotta know someone in there or be friends with someone thats tight with one of the guys to get good shit.

unless you know someone just go to varun and pay the little extra for quality shit and peace of mind

---

<div class="post-metadata">

**Author:** ![Philly](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/philly/32/5748_2.png) [@Philly](https://forums.speedlife.net/u/Philly)\
**Post date:** [April 27, 2009, 4:54am UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/38 "2009-04-27T04:54:16Z")

</div>

> [@FS: (2) XFX GeForce 6800GT](https://forums.speedlife.net/t/fs-2-xfx-geforce-6800gt/20843/9):
>
> Riyad is the shit man!
> 
> Awesome guy. Smart enough to not bother on forums too.
> 
> When my tranny blew, I let him know. It was just over a month after I purchased the motor set. He STILL helped me out! Not going to say how. Because really, it is no ones business. And you can not expect that from him being a joe blow off the street. I run a shop with my dad. Riyad is really good guy. Protects his assets and burns NO bridges. He does really nice work. CLEAN shop.
> 
> Nice cars too. Won best in show JDM at Performance World!

Riyad is doing my swap right now, brought it in last week and should be going to pick it up today. Riyad flys to Japan himself and hand picks everything. My motor is out of an automatic Silvia driven by a handicapped guy. 😃

I can’t wait, I am VERY happy I took my car to him. You can’t ask for more.

Riyad IS the SHIT!!

---

<div class="post-metadata">

**Author:** ![JDMChode](https://avatars.discourse-cdn.com/v4/letter/j/34f0e0/32.png) [@JDMChode](https://forums.speedlife.net/u/JDMChode)\
**Post date:** [April 27, 2009, 5:59am UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/39 "2009-04-27T05:59:10Z")

</div>

Can anyone post some contact information on this elusive Riyad? I’ve searched the forum and found nothing.

---

<div class="post-metadata">

**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\
**Post date:** [April 27, 2009, 6:02am UTC](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836/40 "2009-04-27T06:02:19Z")

</div>

[http://www.riworx.com/](http://www.riworx.com/)

[Previous page](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836.md?page=1)

[Next page](https://forums.speedlife.net/t/eagle-japan-motor-no-good/123836.md?page=3)
