# Ebay auction opinion **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [September 26, 2007, 12:16pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991 "2007-09-26T12:16:12Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![RedDawg](https://avatars.discourse-cdn.com/v4/letter/r/dfb087/32.png) [@RedDawg](https://forums.speedlife.net/u/RedDawg)\ **Post date:** [September 26, 2007, 12:16pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/1 "2007-09-26T12:16:12Z")
I was thinking of sending this guy an offer of $10,000. Think that’s too high, too low?? [http://cgi.ebay.com/ebaymotors/Acura-Integra-Gsr-2001-Acura-Integra-Gsr-Full-race-Skunk-2-Type-r-Jdm-B16\_W0QQcmdZViewItemQQcategoryZ5335QQihZ013QQitemZ230174145796QQrdZ1QQsspagenameZWDVW](http://cgi.ebay.com/ebaymotors/Acura-Integra-Gsr-2001-Acura-Integra-Gsr-Full-race-Skunk-2-Type-r-Jdm-B16_W0QQcmdZViewItemQQcategoryZ5335QQihZ013QQitemZ230174145796QQrdZ1QQsspagenameZWDVW) > **Vehicle Description** > The [car](http://www.hondamarketplace.com/zerothread?id=2099972#) is a 2001 Integra GSR. Only the best parts have been put on this car. This car has been my daily driver and have had zero issues. The only flaws to the car is there is a minor crack in the left tail light and the passenger side mirror has a chip in it. Both are pictured. There is also a minor ding in the driver side fender. It is barely noticable and could not get a really good picture because it was so small but I took one to show how small it is. I also swapped in a JDM B16 trans and unfortunaltey it had a second and slight third gear grind but the car is still 100% driveable. The mod list is as follows. > Body > 2001 Nighthawk Black Pearl GSR 75,000 miles > OEM optional lip kit > Shaved rear hatch including wing, [ACURA](http://www.hondamarketplace.com/zerothread?id=2099972#), and the center “A” > Tint on rear hatch, rear windows, and front windows > Battery relocated to trunk > GSR Blades wrapped in BFG KDW 205 50 15 [tires](http://www.hondamarketplace.com/zerothread?id=2099972#) > Interior > Alpine Head Unit with Boston Acoustic front and rear speakers > Black [leather](http://www.hondamarketplace.com/zerothread?id=2099972#) interior > Apexi S-AFC located in front of gauge cluster for easy view > Suspension > Koni Yellow Shocks > H&R Sport Springs > ASR rear subframe brace and rear swaybar kit > Function 7 rear lca’s > King Motorsports adjustable Upper [Control](http://www.hondamarketplace.com/zerothread?id=2099972#) Arms > Mugen front lower sway bar with energy suspension endlink bushings > Password JDM triangulated front strut bar > C pillar brace > Full Race [traction](http://www.hondamarketplace.com/zerothread?id=2099972#) bar > 4 Point custom trunk brace > Brake master cylinder brace > Engine \*\* Car was tuned by Jeff Evans on Hondata and made 180whp \*\* > OBD2-OBD1 Coversion harness > Skunk 2 Stage 1 cams > Skunk2 adustable cam gears > Custom DTR Race Header > Full metal spun cat > Greddy SP2 catback exhaust > ENDYN ported Skunk2 intake manifold > JG Edelbrock Type R throttle body > Type R valve cover cut to have acces to cam gears > RC 440cc injectors > AEM fuel rail > AEM adustable fuel pressure regulator > AEM fuel filter and gauge > Walbro 255 intank fuel pump > ENDYN recirculating catch can > KOYO dual core radiator with FAL slim fan and AC fan still installed for AC > Cold air intake with velocity stack in front bumper > JDM B16 trans with second and slight third gear grind > ACT Heavy Duty Pressure Plate with street clutch disc > ACT street Light flywheel > Fastbrakes stainless steel cluch line > Enjo motor mounts > Enjo axles [Brakes](http://www.hondamarketplace.com/zerothread?id=2099972#) Fastbrake kit with 12" front rotors and Legend dual piston front calipers with Hawk Pads > Fastbrakes 11" rear rotors with hawk pads > Goodrich stainless steel brake lines ---
**Author:** ![93dx\_hatch](https://avatars.discourse-cdn.com/v4/letter/9/90ced4/32.png) [@93dx\_hatch](https://forums.speedlife.net/u/93dx_hatch)\ **Post date:** [September 26, 2007, 12:17pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/2 "2007-09-26T12:17:40Z")
for $10k you can buy Notch-Dc5s k20 jdm front end 2000 teg ---
**Author:** ![Bull49](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bull49/32/7381_2.png) [@Bull49](https://forums.speedlife.net/u/Bull49)\ **Post date:** [September 26, 2007, 12:21pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/3 "2007-09-26T12:21:01Z")
[quote=“93dx–hatch,post:2,topic:35991"”] for $10k you can buy Notch-Dc5s k20 jdm front end 2000 teg [/quote] a much better option. ---
**Author:** ![RedDawg](https://avatars.discourse-cdn.com/v4/letter/r/dfb087/32.png) [@RedDawg](https://forums.speedlife.net/u/RedDawg)\ **Post date:** [September 26, 2007, 12:25pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/4 "2007-09-26T12:25:50Z")
[quote=“93dx–hatch,post:2,topic:35991"”] for $10k you can buy Notch-Dc5s k20 jdm front end 2000 teg [/quote] no thanks, don’t want a cage and gutted interior. Also need it to pass inspection/emissions without having to “rewire” things ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [September 26, 2007, 12:28pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/5 "2007-09-26T12:28:24Z")
[quote=“RedDawg,post:4,topic:35991"”] no thanks, don’t want a cage and gutted interior. Also need it to pass inspection/emissions without having to “rewire” things [/quote] you can put the interior back in and take out the cage… but whatever ---
**Author:** ![BluBalls](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bluballs/32/7212_2.png) [@BluBalls](https://forums.speedlife.net/u/BluBalls)\ **Post date:** [September 26, 2007, 12:30pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/6 "2007-09-26T12:30:11Z")
not worth 10k to me. ---
**Author:** ![woz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/woz/32/7605_2.png) [@woz](https://forums.speedlife.net/u/woz)\ **Post date:** [September 26, 2007, 12:30pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/7 "2007-09-26T12:30:42Z")
this teg is converted to obd1, wont you run into problems with inspection anyways? this\ **Author:** ![RedDawg](https://avatars.discourse-cdn.com/v4/letter/r/dfb087/32.png) [@RedDawg](https://forums.speedlife.net/u/RedDawg)\ **Post date:** [September 26, 2007, 12:32pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/8 "2007-09-26T12:32:35Z") [quote=“originalsin,post:7,topic:35991"”] this teg is converted to obd1, wont you run into problems with inspection anyways? this\ **Author:** ![woz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/woz/32/7605_2.png) [@woz](https://forums.speedlife.net/u/woz)\ **Post date:** [September 26, 2007, 12:41pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/9 "2007-09-26T12:41:05Z") yea, the k20 has a sticker too… just need to know someone, like he very well might. ---
**Author:** ![91CRXSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91crxsi/32/7247_2.png) [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)\ **Post date:** [September 26, 2007, 1:46pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/10 "2007-09-26T13:46:08Z")
at least the K20 has an OBD2 engine and ECU in it and could be made to pass NYSI pretty easily. This car prolly has an OBD1 engine and ecu since it was converted to OBD1. and it has a tranny grind. for the amount of money you could sell the cage out of gregs car you could buy the rest of the interior panels. ---
**Author:** ![Paulo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/paulo/32/7328_2.png) [@Paulo](https://forums.speedlife.net/u/Paulo)\ **Post date:** [September 26, 2007, 1:47pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/11 "2007-09-26T13:47:48Z")
[quote=“93dx–hatch,post:2,topic:35991"”] for $10k you can buy Notch-Dc5s k20 jdm front end 2000 teg [/quote] Greg’s selling it?! Or just open to selling it if the right offer comes along? I love that car. ---
**Author:** ![91CRXSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91crxsi/32/7247_2.png) [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)\ **Post date:** [September 26, 2007, 2:19pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/12 "2007-09-26T14:19:29Z")
he moved to Chicago and needs to sell it ---
**Author:** ![JoesTypeS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/joestypes/32/7190_2.png) [@JoesTypeS](https://forums.speedlife.net/u/JoesTypeS)\ **Post date:** [September 26, 2007, 2:57pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/13 "2007-09-26T14:57:47Z")
[quote=“91CRXSI,post:10,topic:35991"”] at least the K20 has an OBD2 engine and ECU in it and could be made to pass NYSI pretty easily. This car prolly has an OBD1 engine and ecu since it was converted to OBD1. and it has a tranny grind. for the amount of money you could sell the cage out of gregs car you could buy the rest of the interior panels. [/quote] Whoa Whoa Whoa The Teg is OBDII, has always been OBDII There **was** a Conversion harness AT THE ECU when it had the b-series in there. The OBDII scan port on the K20 harness works and will pass inspection if you choose to “turn off” the codes using kpro. Car will pass smog if you run a cat The roll bar in the car is removable and all you need are the rear panels & carpet. I believe greg still has the **JDM ITR** rear seats WTF since when did it have a tranny grind? The car you’re looking at would not pass a plug in inspection btw ---
**Author:** ![mindless](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mindless/32/7286_2.png) [@mindless](https://forums.speedlife.net/u/mindless)\ **Post date:** [September 26, 2007, 5:53pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/14 "2007-09-26T17:53:12Z")
UMM y does it have 440cc injectors and a 255 fuel pump for all of the 180 hp… buy gregs car u wont be disappointed with it. ---
**Author:** ![Supraman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/supraman/32/7307_2.png) [@Supraman](https://forums.speedlife.net/u/Supraman)\ **Post date:** [September 26, 2007, 6:25pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/15 "2007-09-26T18:25:42Z")
[quote=“JoesTypeS,post:13,topic:35991"”] WTF since when did it have a tranny grind? The car you’re looking at would not pass a plug in inspection btw [/quote] snip i think he meant the car on ebay… ---
**Author:** ![ultradriver10000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ultradriver10000/32/7397_2.png) [@ultradriver10000](https://forums.speedlife.net/u/ultradriver10000)\ **Post date:** [September 26, 2007, 6:37pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/16 "2007-09-26T18:37:41Z")
I saw greg at UB the other day, the car looks great, I think he said he was trading the shell for a bike? (Then selling the engine off) So I’d say jump on that car man you’d be way better off. ---
**Author:** ![notch-dc5](https://avatars.discourse-cdn.com/v4/letter/n/919ad9/32.png) [@notch-dc5](https://forums.speedlife.net/u/notch-dc5)\ **Post date:** [September 26, 2007, 8:45pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/17 "2007-09-26T20:45:38Z")
I still have the car. And no it doesn’t have any tranny grinds. Yes, it is still for sale, and I have the back interior pannels. ---
**Author:** ![91CRXSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91crxsi/32/7247_2.png) [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)\ **Post date:** [September 26, 2007, 9:06pm UTC](https://forums.speedlife.net/t/ebay-auction-opinion/35991/18 "2007-09-26T21:06:22Z")
[quote=“JoesTypeS,post:13,topic:35991"”] Whoa Whoa Whoa The Teg is OBDII, has always been OBDII There **was** a Conversion harness AT THE ECU when it had the b-series in there. The OBDII scan port on the K20 harness works and will pass inspection if you choose to “turn off” the codes using kpro. Car will pass smog if you run a cat The roll bar in the car is removable and all you need are the rear panels & carpet. I believe greg still has the **JDM ITR** rear seats WTF since when did it have a tranny grind? The car you’re looking at would not pass a plug in inspection btw [/quote] you got everything i said backwards. what iu said was at least gregs car is all OBDII. and then i said “this car” as in the one he’s posting has all OBD1 and has the tranny grinds