# edelbrock or holley **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [June 25, 2004, 6:26pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365 "2004-06-25T18:26:27Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![TKR\_Mustang](https://avatars.discourse-cdn.com/v4/letter/t/b77776/32.png) [@TKR\_Mustang](https://forums.speedlife.net/u/TKR_Mustang)\ **Post date:** [June 25, 2004, 6:26pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/1 "2004-06-25T18:26:27Z")
Im goin to rebuild my 302 this summer and i was wondering what package u guys like… edelbrock RPM kit (heads, cam, upper/lower intake manifold, 70mm throttlebody) or the holley systemax package offering similar components? ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [June 25, 2004, 6:30pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/2 "2004-06-25T18:30:19Z")
I’d get rid of the Shitty Tranny before anything. Then Mismatch companys Trick flow intake C&L Throttle Body/ Air Meter Trick flow heads a Custom Grind Cam ---
**Author:** ![TKR\_Mustang](https://avatars.discourse-cdn.com/v4/letter/t/b77776/32.png) [@TKR\_Mustang](https://forums.speedlife.net/u/TKR_Mustang)\ **Post date:** [June 25, 2004, 6:37pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/3 "2004-06-25T18:37:12Z")
i got the Tremec 5 speed transmission, alum flywheel and hase 1200 hp clutch put in over the winter so i could build the motor this fall and get it ready for the stage 3 procharger ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [June 25, 2004, 6:43pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/4 "2004-06-25T18:43:07Z")
Removing the Alteezas could add 43.8 hp your confusing me, you want a edelbrock or holley or a Procharger 3 ---
**Author:** ![TKR\_Mustang](https://avatars.discourse-cdn.com/v4/letter/t/b77776/32.png) [@TKR\_Mustang](https://forums.speedlife.net/u/TKR_Mustang)\ **Post date:** [June 25, 2004, 6:54pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/5 "2004-06-25T18:54:56Z")
im goin to strip the motor completely down and start from the bottom up and completely rebuild the entire motor but hopefully my cyclinders arent 2 disfigured that i dont need to get the block drilled out… i was asking for opinons on what manufacture i should go with on building my motor either the edelbrock RPM package or the holley systemax and then in the spring im goin to buy the procharger… im looking for a mild build up that i can get alot of horsepower but still can drive it on the street ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [June 25, 2004, 7:00pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/6 "2004-06-25T19:00:27Z")
> [@Shaggy](#): > > I’d get rid of the Shitty Tranny before anything. > > Then Mismatch companys > Trick flow intake > C&L Throttle Body/ Air Meter > Trick flow heads > a Custom Grind Cam what he said !!! :blue: ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [June 25, 2004, 7:13pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/7 "2004-06-25T19:13:24Z")
This will save you alot of time, money and aggrevation. Find the steepest, Least populated hill by a water source. collect the insurance $ and buy LS1 :boink ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [June 25, 2004, 7:14pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/8 "2004-06-25T19:14:17Z")
> [@Shaggy](#): > > This will save you alot of time, money and aggrevation. > Find the steepest, Least populated hill by a water source. and baptize it! ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [June 25, 2004, 7:15pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/9 "2004-06-25T19:15:18Z")
> [@Jeff95TA](#): > > and baptize it! 🤣 ---
**Author:** ![TKR\_Mustang](https://avatars.discourse-cdn.com/v4/letter/t/b77776/32.png) [@TKR\_Mustang](https://forums.speedlife.net/u/TKR_Mustang)\ **Post date:** [June 25, 2004, 7:25pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/10 "2004-06-25T19:25:37Z")
If i had to do a motorswap id drop in a 460 cobra jet and eat a ls1 without any mods… and if i brought home a gm my dad would turn into rambo and have a rocket launcher bbq… this is ford country… or hick country… w/e u preffer for the redneck sticks out here in slickville ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [June 25, 2004, 7:28pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/11 "2004-06-25T19:28:08Z")
> [@TKR Mustang](#): > > If i had to do a motorswap id drop in a 460 cobra jet and eat a ls1 without any mods… and if i brought home a gm my dad would turn into rambo and have a rocket launcher bbq… this is ford country… or hick country… w/e u preffer for the redneck sticks out here in slickville 🤣🤣 not ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [June 25, 2004, 7:33pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/12 "2004-06-25T19:33:39Z")
If i was your dad, I woulda kicked your ass. Just for putting Alteezas on a legendary car :doh: ---
**Author:** ![venom](https://avatars.discourse-cdn.com/v4/letter/v/8c91f0/32.png) [@venom](https://forums.speedlife.net/u/venom)\ **Post date:** [June 27, 2004, 4:55pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/13 "2004-06-27T16:55:56Z")
> [@Shaggy](#): > > C&L Throttle Body/ Air Meter :nono: PRO-M = :bowdown: ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [June 27, 2004, 5:00pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/14 "2004-06-27T17:00:40Z")
> [@venom](#): > > :nono: > > PRO-M = :bowdown: :nuts: ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [June 27, 2004, 7:24pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/15 "2004-06-27T19:24:36Z")
Pro-M mass air \> C&L if you already have updated injectors, go with the Pro-m, if not, get the C&L, that way you only need to replace the blow through tube when you get bigger injectors. As far as the intake/heads/cam choice… I **HIGHLY HIGHLY** reccomend a set of Trick Flow Twisted wedge heads… also for intake wise, see if you can find an intake manifold from a 96-98 V8 explorer, It’s a GT40 intake which are very good. best bang for the buck is definately the Cobra Upper and Lower manifold. I am running the Cobra upper and lower intake, twisted wedge heads, a custom cam, and a 70MM BBK Throttle body. you can probably shop around and put your own package together for much much less ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [June 27, 2004, 7:34pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/16 "2004-06-27T19:34:43Z")
thousands of Companys for the same product :nuts: ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [June 27, 2004, 10:30pm UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/17 "2004-06-27T22:30:39Z")
> [@TKR Mustang](#): > > If i had to do a motorswap id drop in a 460 cobra jet and eat a ls1 without any mods… and if i brought home a gm my dad would turn into rambo and have a rocket launcher bbq… this is ford country… or hick country… w/e u preffer for the redneck sticks out here in slickville dude with as much knowledge of 5.0s i have i could so easily own the shit outt of you for that bullshit statement but since im feeling in good mood ill help your young punk ass out. if i was you i would go with the trick flow package deal instead of the overpriced holley or even the eldebrock. [eldebrock can stick with gms and hondas]. trickflow have been working with ford for the longest time. this combo is the cheaper then the holley and IMO alot better quailty. one your clutch is way to strong. youll never make 1200 hp on a stock casting block. so you just wasted money and can actually hurt performance. you say you want a procharger along with these combos. what are your goals of speed and dont tell me you just want hp. a properly setup car can go faster then a car with all power. from the way your speaking i dont think you have anyclue about a mustang but if you dont act a fool we will help you along. if you come incorrect we will own you to the point you leave this site. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [June 28, 2004, 4:18am UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/18 "2004-06-28T04:18:43Z")
> [@Quik](#): > > dude with as much knowledge of 5.0s i have i could so easily own the shit outt of you for that bullshit statement but since im feeling in good mood ill help your young punk ass out. > > if i was you i would go with the trick flow package deal instead of the overpriced holley or even the eldebrock. [eldebrock can stick with gms and hondas]. trickflow have been working with ford for the longest time. this combo is the cheaper then the holley and IMO alot better quailty. one your clutch is way to strong. youll never make 1200 hp on a stock casting block. so you just wasted money and can actually hurt performance. you say you want a procharger along with these combos. what are your goals of speed and dont tell me you just want hp. a properly setup car can go faster then a car with all power. > > from the way your speaking i dont think you have anyclue about a mustang but if you dont act a fool we will help you along. if you come incorrect we will own you to the point you leave this site. do it ,the book man has spoken!!! :blah: 💤 :finger: ---
**Author:** ![oneslowbowtie](https://avatars.discourse-cdn.com/v4/letter/o/d78d45/32.png) [@oneslowbowtie](https://forums.speedlife.net/u/oneslowbowtie)\ **Post date:** [June 28, 2004, 8:11am UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/19 "2004-06-28T08:11:26Z")
> [@8.1crew](#): > > do it ,the book man has spoken!!! :blah: 💤 :finger: I will take "Quik kinda has a Clue’’ for $500 – Alex ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [June 28, 2004, 8:15am UTC](https://forums.speedlife.net/t/edelbrock-or-holley/167365/20 "2004-06-28T08:15:01Z")
> [@oneslowbowtie](#): > > I will take "Quik kinda has a Clue’’ for $500 – Alex 🤣🤣 [Next page](https://forums.speedlife.net/t/edelbrock-or-holley/167365.md?page=2)