# ef brackets on ITR seats?? **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [April 4, 2008, 9:43am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201 "2008-04-04T09:43:52Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![mickdad246](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mickdad246/32/7274_2.png) [@mickdad246](https://forums.speedlife.net/u/mickdad246)\ **Post date:** [April 4, 2008, 9:43am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/1 "2008-04-04T09:43:52Z")
does anyone kno if ef seat brackets can be transferred to itr seats:pimp:, because i have itr seats in my ef but the 4th bolt is missing on each side because as far as i kno it still has ITR brackets on them… i kno eg, dc, and delsol brackets all transfer with no problem, but im wondering bout ef cause its earlier honda game!? ---
**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\ **Post date:** [April 4, 2008, 9:46am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/2 "2008-04-04T09:46:46Z")
Quick answer off the top of my head, no. They are desinged a little diffferently than the later Honda seats. Basing this on the fact that seat rail swaps on the older Hondas’, pre 91, don’t work out. The older seat rails will not swap over and bolt right up to the newer, '92+, seats. ---
**Author:** ![I\_Have\_an\_STD](https://avatars.discourse-cdn.com/v4/letter/i/50afbb/32.png) [@I\_Have\_an\_STD](https://forums.speedlife.net/u/I_Have_an_STD)\ **Post date:** [April 4, 2008, 9:50am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/3 "2008-04-04T09:50:54Z")
wont work. either drill holes in the floor to mount them, or put the ITR fabric on some EF seats ---
**Author:** ![Mr\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mr_t/32/7454_2.png) [@Mr\_T](https://forums.speedlife.net/u/Mr_T)\ **Post date:** [April 4, 2008, 9:51am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/4 "2008-04-04T09:51:22Z")
> [@civichb](#): > > Quick answer off the top of my head, no. > They are desinged a little diffferently than the later Honda seats. > Basing this on the fact that seat rail swaps on the older Hondas’, pre 91, don’t work out. > The older seat rails will not swap over and bolt right up to the newer, '92+, seats. ill 2nd that, I tried putting da integra seats in my old dc2 teg and they would not fit. Three of of the four holes line up. But the one that doesn’t line up you cant really do anything about because the rails do not come off of da and ef seats. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [April 4, 2008, 9:52am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/5 "2008-04-04T09:52:13Z")
Can’t you just weld on a new mounting point for the 4th bolt? If 3/4 of them bolt up, it would be really easy. ---
**Author:** ![Bull49](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bull49/32/7381_2.png) [@Bull49](https://forums.speedlife.net/u/Bull49)\ **Post date:** [April 4, 2008, 10:05am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/6 "2008-04-04T10:05:16Z")
it won’t work and it’s physically impossible to fabricate any type of solution. so, uh, can i have the seats? ---
**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\ **Post date:** [April 4, 2008, 10:25am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/7 "2008-04-04T10:25:12Z")
> [@95mx6](#): > > you cant really do anything about because the rails do not come off of da and ef seats. EF seat rails do come off from the seat pan, the thing is, they won’t bolt up to any newer Honda seats. ---
**Author:** ![Mr\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mr_t/32/7454_2.png) [@Mr\_T](https://forums.speedlife.net/u/Mr_T)\ **Post date:** [April 4, 2008, 10:41am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/8 "2008-04-04T10:41:06Z")
> [@civichb](#): > > EF seat rails do come off from the seat pan, the thing is, they won’t bolt up to any newer Honda seats. yea i dk why they didnt just stick to the same pattern throw the egs and dc’s too.Da’s i know dont come off because i ripped a 2 inch gash in my arm trying to figure out if they did lol ---
**Author:** ![mickdad246](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mickdad246/32/7274_2.png) [@mickdad246](https://forums.speedlife.net/u/mickdad246)\ **Post date:** [April 4, 2008, 10:56am UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/9 "2008-04-04T10:56:42Z")
> [@newman](#): > > Can’t you just weld on a new mounting point for the 4th bolt? > > If 3/4 of them bolt up, it would be really easy. wanna do it for me? ---
**Author:** ![943kgt](https://avatars.discourse-cdn.com/v4/letter/9/4bbf92/32.png) [@943kgt](https://forums.speedlife.net/u/943kgt)\ **Post date:** [April 4, 2008, 7:50pm UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/10 "2008-04-04T19:50:37Z")
make them work, if i can put integra seats in my toyota pickup i think you can make those work in another honda! ![http://i7.photobucket.com/albums/y264/943kgt/DSCF0003-2.jpg](http://i7.photobucket.com/albums/y264/943kgt/DSCF0003-2.jpg) ---
**Author:** ![97\_B18b1](https://avatars.discourse-cdn.com/v4/letter/9/cdc98d/32.png) [@97\_B18b1](https://forums.speedlife.net/u/97_B18b1)\ **Post date:** [April 4, 2008, 8:04pm UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/11 "2008-04-04T20:04:46Z")
maybe u have to do what is done with prelude seats, ef inner rails and itr outer rails, or vice versa ---
**Author:** ![mickdad246](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mickdad246/32/7274_2.png) [@mickdad246](https://forums.speedlife.net/u/mickdad246)\ **Post date:** [April 4, 2008, 8:18pm UTC](https://forums.speedlife.net/t/ef-brackets-on-itr-seats/46201/12 "2008-04-04T20:18:33Z")
> [@97\_B18b1](#): > > maybe u have to do what is done with prelude seats, ef inner rails and itr outer rails, or vice versa rails arent interchangable between dc/eg and ef…so im just gonna make a little bracket that moves the bolt location…