# Engine Shipping Hookups?
**URL:** https://forums.speedlife.net/t/engine-shipping-hookups/43603
**Category:** NYSpeed Automotive
**Created:** [February 18, 2008, 1:00am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603 "2008-02-18T01:00:24Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Final\_GTS](https://forums.speedlife.net/u/Final_GTS)
#### Post date: [February 18, 2008, 1:00am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/1 "2008-02-18T01:00:24Z")
Hey guys,
Curious if anyone has any engine shipping hookups? Looking for some decent rates, will make it worth your while… not a one time deal, relationship for heavier shipments?
-Pallet (Boxed in)
-50x36x30 (approx)
-750-800 pounds
-MUST be insured for $35,000
Best quote I have seen was around 350, not including insurance.
Thanks,
---
### Author:  [@psphinx81](https://forums.speedlife.net/u/psphinx81)
#### Post date: [February 18, 2008, 3:54am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/2 "2008-02-18T03:54:01Z")
juicedGT
---
### Author:  [@b5a4](https://forums.speedlife.net/u/b5a4)
#### Post date: [February 18, 2008, 2:14pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/3 "2008-02-18T14:14:20Z")
$350 doesn’t seem too unreasonable. It cost me $200 for a 150lb motorcycle engine shipped from Florida.
---
### Author:  [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [February 18, 2008, 2:39pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/4 "2008-02-18T14:39:43Z")
JuicedGT.
---
### Author:  [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)
#### Post date: [February 18, 2008, 2:47pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/5 "2008-02-18T14:47:28Z")
seriously, use the fucking search button
---
### Author:  [@Anonymity](https://forums.speedlife.net/u/Anonymity)
#### Post date: [February 18, 2008, 3:01pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/6 "2008-02-18T15:01:13Z")
he is:
Dan Lesser
The Viper Doctor
2004 White Mamba Viper SRT-10
2008 Jeep Grand Cherokee SRT-8
And he doesnt need the search button
---
### Author:  [@Violator](https://forums.speedlife.net/u/Violator)
#### Post date: [February 18, 2008, 4:56pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/7 "2008-02-18T16:56:39Z")
I have had good service from R+L Carriers several times shipping trannys on pallets.
[http://www.gorlc.com/](http://www.gorlc.com/)
Get a instant quote online
---
### Author:  [@Coldaccord](https://forums.speedlife.net/u/Coldaccord)
#### Post date: [February 18, 2008, 6:19pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/8 "2008-02-18T18:19:30Z")
^another vote for R+L, just shipped another motor through them a couple weeks ago. got to virginia in 3 days in perfect shape
---
### Author:  [@Final\_GTS](https://forums.speedlife.net/u/Final_GTS)
#### Post date: [February 18, 2008, 8:30pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/9 "2008-02-18T20:30:37Z")
> [@boardjnky4](#):
>
> seriously, use the fucking search button
I did fuckstick, but I dont want to go PMing people who didnt directly reply to me. Most of it was WAY outdated anyway.
---
### Author:  [@Final\_GTS](https://forums.speedlife.net/u/Final_GTS)
#### Post date: [February 18, 2008, 8:31pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/10 "2008-02-18T20:31:06Z")
> [@Anonymity](#):
>
> he is:
> Dan Lesser
> The Viper Doctor
> 2004 White Mamba Viper SRT-10
> 2008 Jeep Grand Cherokee SRT-8
>
> And he doesnt need the search button
Exactly:burnin:
---
### Author:  [@Final\_GTS](https://forums.speedlife.net/u/Final_GTS)
#### Post date: [February 18, 2008, 8:33pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/11 "2008-02-18T20:33:28Z")
> [@b5a4](#):
>
> $350 doesn’t seem too unreasonable. It cost me $200 for a 150lb motorcycle engine shipped from Florida.
350 was via an indirect courier, 6 days shipment time versus 3, no insurance, and god knows what other loopholes to drop/lose/damage my shipment.
I will gladly pay that amount or more to make it as secure as possible. However, the fucking LUDICRIS prices I have recieved from some ranging from 1000-2600 are OUT of the question. I would sooner strap the thing on skateboards and push the fucking thing to Nebraska than pay more to ship an engine than the whole fucking car…
---
### Author:  [@Final\_GTS](https://forums.speedlife.net/u/Final_GTS)
#### Post date: [February 18, 2008, 8:37pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/12 "2008-02-18T20:37:03Z")
R&L is one of the shippers I have contacted. Quote wasnt too bad, about 450, though insurance is the problem. They cap at 10$/lb, and as anyone can figure out, thats WAAAAAAY short of what the shipment is worth. I have already contacted my insurance company about a rider on the shipment, but I would prefer to wait and hear back from another shipper I contacted first. Time is an issue as well, I need to get this thing out of here TOMORROW.
---
### Author:  [@FiftyCheven](https://forums.speedlife.net/u/FiftyCheven)
#### Post date: [February 18, 2008, 8:37pm UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/13 "2008-02-18T20:37:25Z")
PM me the details and i can get you a quote in the morning. need the zip…residential or business etc. I can most likely do better than any of the quotes your getting. my carrier discounts range from 40% to 70% off depending on who is used.
---
### Author:  [@FASTMOFO](https://forums.speedlife.net/u/FASTMOFO)
#### Post date: [February 19, 2008, 12:32am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/14 "2008-02-19T00:32:25Z")
:word: I just shipped something through JuicedGT. He made it easy and cheap.
---
### Author:  [@ezfd](https://forums.speedlife.net/u/ezfd)
#### Post date: [February 19, 2008, 6:08am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/15 "2008-02-19T06:08:32Z")
I paid around $180-$200 through R+L for an FD shortblock from Kentucky, but that fit on a half pallet and weighed just over 200lbs.
---
### Author:  [@FiftyCheven](https://forums.speedlife.net/u/FiftyCheven)
#### Post date: [February 19, 2008, 6:22am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/16 "2008-02-19T06:22:05Z")
Dan, I will call you. I can do it for $267 to $329 depending on if a liftgated truck is needed. That is through Roadway. Regular price = $711
If picked up today, it will be delivered on Friday.
---
### Author:  [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)
#### Post date: [February 19, 2008, 6:36am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/17 "2008-02-19T06:36:12Z")
> [@Final GTS](#):
>
> I did fuckstick, but I dont want to go PMing people who didnt directly reply to me. Most of it was WAY outdated anyway.
Everyone of these threads results in, “pm juicedgt”. It is quite obvious that he is the go-to guy to get a shipping hookup. He has been working there for quite some time, so nothing is “outdated”. Its ok to pm the guy rather then cluttering the board with a repeated discussion that happens on a seemingly weekly basis.
---
### Author:  [@b5a4](https://forums.speedlife.net/u/b5a4)
#### Post date: [February 19, 2008, 10:03am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/18 "2008-02-19T10:03:08Z")
> [@Final GTS](#):
>
> 350 was via an indirect courier, 6 days shipment time versus 3, no insurance, and god knows what other loopholes to drop/lose/damage my shipment.
>
> I will gladly pay that amount or more to make it as secure as possible. However, the fucking LUDICRIS prices I have recieved from some ranging from 1000-2600 are OUT of the question. I would sooner strap the thing on skateboards and push the fucking thing to Nebraska than pay more to ship an engine than the whole fucking car…
Oh, didn’t realise that the other quotes were so rediculously high.
---
### Author:  [@FiftyCheven](https://forums.speedlife.net/u/FiftyCheven)
#### Post date: [February 20, 2008, 7:14am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/19 "2008-02-20T07:14:48Z")
Your man JuicedGT took care of this for a whopping $256.03, direct.
Left you a voice mail Dan.
---
### Author:  [@Karter](https://forums.speedlife.net/u/Karter)
#### Post date: [February 20, 2008, 7:20am UTC](https://forums.speedlife.net/t/engine-shipping-hookups/43603/20 "2008-02-20T07:20:07Z")
makes note that juicedGT is the Go to guy for shipping large stuff.
[Next page](https://forums.speedlife.net/t/engine-shipping-hookups/43603.md?page=2)