# Eric's GSXR Buggy **URL:** \ **Category:** Builds\ **Created:** [March 4, 2010, 11:15am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706 "2010-03-04T11:15:01Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [March 4, 2010, 11:15am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/1 "2010-03-04T11:15:01Z")
I picked this thing up a while ago, but just started on it. Future plans: Full Front double A-Arm setup w/ disk brakes Full rear double A-Arm w/ CV shafts Racing Seat Quick release steering wheel Lights (even brake lights!) **_Current Plans_** 07’ GSXR 600 engine swap GSXR Gauges GSXR rear caliper swap knobby ass tires When bought (Yes, Underboosted picked one up too!) ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/bug.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/bug.jpg) ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/car5.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/car5.jpg) Old Honda 13hp engine ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/bug3.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/bug3.jpg) New GSXR 600 Engine ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture009.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture009.jpg) Pulled the engine, and trans today. ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture010.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture010.jpg) ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture011.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture011.jpg) Just seeing how to fit everything. ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture015.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture015.jpg) ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture016.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture016.jpg) ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture020.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture020.jpg) Custom exhaust needed as usual. ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture021.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture021.jpg) ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture024.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture024.jpg) Engine lines up great with the original FNR trans. ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture023.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture023.jpg) Trans cuts it to close to the engine. I need to do a little triming to the egine mount to fit the trans better. ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture019.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture019.jpg) ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture017.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/Picture017.jpg) ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [March 4, 2010, 11:19am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/2 "2010-03-04T11:19:40Z")
i would like to drive this sir. that is all. ---
**Author:** ![GermanPSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/germanpsi/32/6353_2.png) [@GermanPSI](https://forums.speedlife.net/u/GermanPSI)\ **Post date:** [March 4, 2010, 11:19am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/3 "2010-03-04T11:19:57Z")
Dude ur nuts and can’t wait to see it done! ---
**Author:** ![Justin\_GSR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin_gsr/32/6412_2.png) [@Justin\_GSR](https://forums.speedlife.net/u/Justin_GSR)\ **Post date:** [March 4, 2010, 11:24am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/4 "2010-03-04T11:24:20Z")
My friend Dom (welder for synapse) is doing somthing very similar to this, with the same motor. Good luck, should be a ton of fun ---
**Author:** ![psi2high](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psi2high/32/6320_2.png) [@psi2high](https://forums.speedlife.net/u/psi2high)\ **Post date:** [March 4, 2010, 11:26am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/5 "2010-03-04T11:26:15Z")
Ha ha good work dude ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 4, 2010, 11:27am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/6 "2010-03-04T11:27:02Z")
YESSSS. I am very jellous! I have some sick ass plans in my head for a road maybelegal one myself. Dude if you want to jump this thing over anything more than a curb. Get yourself some long travel ATV shocks. Elka, PEP, FOX, AXIS… I know a YFZ LT setup is a 18.5" long one, but I have seen them 20"+ They can be valved to any weight, and you can just cut off the stock front end arm tabs and weld some new ones in to hold an entire ATV long travel front end on. Use the disk brakes, hubs spindles, wheels, tires, tie rods will need to be custom. but that shit would give you about 15"s of SICK ASS travel! then do something in the ass end… and you would have a mini sand rail! sub-fucking-scribed!!! ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [March 4, 2010, 11:29am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/7 "2010-03-04T11:29:20Z")
> [@KrazyKid"](#): > > YESSSS. I am very jellous! I have some sick ass plans in my head for a road maybelegal one myself. > > Dude if you want to jump this thing over anything more than a curb. Get yourself some long travel ATV shocks. Elka, PEP, FOX, AXIS… I know a YFZ LT setup is a 18.5" long one, but I have seen them 20"+ They can be valved to any weight, and you can just cut off the stock front end arm tabs and weld some new ones in to hold an entire ATV long travel front end on. Use the disk brakes, hubs spindles, wheels, tires, tie rods will need to be custom. but that shit would give you about 15"s of SICK ASS travel! then do something in the ass end… and you would have a mini sand rail! > > sub-fucking-scribed!!! Exactly what I planed to do already. I was going to pick up a Raptor/ Banshee front end, extend them a bit and call it good. ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [March 4, 2010, 11:45am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/8 "2010-03-04T11:45:48Z")
Going for this setup pretty much. ![http://i167.photobucket.com/albums/u147/reckone518/Buggy/buggy25203.jpg](http://i167.photobucket.com/albums/u147/reckone518/Buggy/buggy25203.jpg) ---
**Author:** ![freakLS7](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freakls7/32/6298_2.png) [@freakLS7](https://forums.speedlife.net/u/freakLS7)\ **Post date:** [March 4, 2010, 11:48am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/9 "2010-03-04T11:48:20Z")
^^^^cant see^^^ ---
**Author:** ![OMGSIIK](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/omgsiik/32/6489_2.png) [@OMGSIIK](https://forums.speedlife.net/u/OMGSIIK)\ **Post date:** [March 4, 2010, 11:51am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/10 "2010-03-04T11:51:48Z")
:thumbup ---
**Author:** ![GATVILLE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatville/32/6362_2.png) [@GATVILLE](https://forums.speedlife.net/u/GATVILLE)\ **Post date:** [March 4, 2010, 11:52am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/11 "2010-03-04T11:52:41Z")
SICK! subscribed ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [March 4, 2010, 12:08pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/12 "2010-03-04T12:08:45Z")
> [@On another topic](https://forums.speedlife.net/t/29484/105): > > ^^^^cant see^^^ Fixed :thumbup ---
**Author:** ![ReDevil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redevil/32/6385_2.png) [@ReDevil](https://forums.speedlife.net/u/ReDevil)\ **Post date:** [March 4, 2010, 12:16pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/13 "2010-03-04T12:16:03Z")
Fukin cool. ---
**Author:** ![mcflurry](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mcflurry/32/6468_2.png) [@mcflurry](https://forums.speedlife.net/u/mcflurry)\ **Post date:** [March 4, 2010, 2:15pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/14 "2010-03-04T14:15:11Z")
sickkkk dude! ---
**Author:** ![DFDrocks247365](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dfdrocks247365/32/24907_2.png) [@DFDrocks247365](https://forums.speedlife.net/u/DFDrocks247365)\ **Post date:** [March 4, 2010, 2:21pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/15 "2010-03-04T14:21:48Z")
This looks awesome!!! ---
**Author:** ![freakLS7](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freakls7/32/6298_2.png) [@freakLS7](https://forums.speedlife.net/u/freakLS7)\ **Post date:** [March 4, 2010, 2:39pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/16 "2010-03-04T14:39:16Z")
this thing looks like its gonna be nuts! so sick! ---
**Author:** ![Murrdog9000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/murrdog9000/32/6391_2.png) [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)\ **Post date:** [March 4, 2010, 3:20pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/17 "2010-03-04T15:20:51Z")
awesome!!! ---
**Author:** ![offroadzj](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/offroadzj/32/6428_2.png) [@offroadzj](https://forums.speedlife.net/u/offroadzj)\ **Post date:** [March 4, 2010, 3:47pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/18 "2010-03-04T15:47:51Z")
Pssshhhh. GSXR 600 is weak. R1 motor would have been the win!!! ---
**Author:** ![AMD\_IS\_THE\_BEST](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/amd_is_the_best/32/6342_2.png) [@AMD\_IS\_THE\_BEST](https://forums.speedlife.net/u/AMD_IS_THE_BEST)\ **Post date:** [March 4, 2010, 5:14pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/19 "2010-03-04T17:14:21Z")
Sick dude! Looks like a great frame to start from. ---
**Author:** ![Vovchandr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vovchandr/32/6275_2.png) [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)\ **Post date:** [March 4, 2010, 5:31pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/20 "2010-03-04T17:31:17Z")
Fn sick. What are you doing for tranny/clutch? [Next page](https://forums.speedlife.net/t/erics-gsxr-buggy/250706.md?page=2)