# Eric's GSXR Buggy

**URL:** <https://forums.speedlife.net/t/erics-gsxr-buggy/250706>\
**Category:** Builds\
**Created:** [March 4, 2010, 11:15am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706 "2010-03-04T11:15:01Z")\
**Posts on this page:** 1\
**Showing post:** 60

<div class="post-metadata">

**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\
**Post date:** [August 18, 2010, 2:30pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/60 "2010-08-18T14:30:58Z")

</div>

> [@Callout : Layzie](https://forums.speedlife.net/t/callout-layzie/34444/93):
>
> 500 :excited Wish i got that. I cant even give these arms away haha. I did get 200 for my stock shocks after i went long travel. That will be the most expensive part

Well you can give them away to me :thumbup I am sure they are what I have been looking for. I was planing to go with the raptor frotnend due to the arms being longer then the Banshee ones. But 450’s will work fine also. PM me when I can get them!

I am going with a dual arm setup in the rear using modified civic spindles (basically cut down to just a bearing housing) and axles. I have been looking at my Banshee and Underboosted’s Raptor to see what parts would be good to use.

Simular to this setup

Or utilize the lower ball joints and go this way.  
 ![http://content.foto.mail.ru/list/bobrov/3/i-31.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/d/d/dd11c02200a80e562df7202083bf9a390d9e10ce.jpeg)

---

_[View the full topic](https://forums.speedlife.net/t/erics-gsxr-buggy/250706)._