# Eric's GSXR Buggy **URL:** \ **Category:** Builds\ **Created:** [March 4, 2010, 11:15am UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706 "2010-03-04T11:15:01Z")\ **Posts on this page:** 1\ **Showing post:** 70
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [August 20, 2010, 12:49pm UTC](https://forums.speedlife.net/t/erics-gsxr-buggy/250706/70 "2010-08-20T12:49:56Z")
> [@\*\*\*9/02/07 NYSpeed end of summer BBQ @ Letchworth \*\*\*PAYMENT Deadline 8/20\*\*\*](https://forums.speedlife.net/t/9-02-07-nyspeed-end-of-summer-bbq-letchworth-payment-deadline-8-20/32470/224): > > just get some spindles for the wheels patern you want to run. $50 worth of tubing and $20 for bushings, what ever 4 heim joints cost and you could make some custom length arms and they could be adjustable. camber, caster and alignments wise. then you can get awesome ammounts fo travel and fully adjustable suspension up front. make a few shock mounting points too. > > same for the rear. a nice 4 link trailing arm setup would be cake. just make a flange plate thats welded to the 2 forward arms that bolts to the existing honda wheel hub. Yea I am going with the 4 link arm setup out back. I have to weld up a full trans (spool) housing anyway so the arms will come off of that. I just picked up a 3A seat from gearhead so hopfully this thing should be 3/4 done by next weekend. > [@vcforlife15"](#): > > just sent you a pm, sorry forgot about this thread. if you still want them they are all yours NP, PMed ya back! --- _[View the full topic](https://forums.speedlife.net/t/erics-gsxr-buggy/250706)._