# ErnGotti's 08 EvoX

**URL:** <https://forums.speedlife.net/t/erngottis-08-evox/255807>\
**Category:** Builds\
**Created:** [November 30, 2010, 2:18pm UTC](https://forums.speedlife.net/t/erngottis-08-evox/255807 "2010-11-30T14:18:11Z")\
**Posts on this page:** 1\
**Showing post:** 2202

<div class="post-metadata">

**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\
**Post date:** [September 14, 2011, 4:56pm UTC](https://forums.speedlife.net/t/erngottis-08-evox/255807/2202 "2011-09-14T16:56:13Z")

</div>

> [@Happy B-Day Jeeves](https://forums.speedlife.net/t/happy-b-day-jeeves/45378/3):
>
> I went crazy colors on purpose. I deliberately chose an ugly color scheme.  
> The side of the box says “let the brakes cool down for fifteen minutes” not “drive around sparingly stopping” so what better way to cool brakes off than not use them at all?

dude. you have the internet. 5 seconds of research would have led you to the proper way.

it’s probably fine, but w/e, but the whole point of bedding in pads is to essentially familarize the pad with the rotor by getting the pad hot enough to coat the rotor in a layer of pad material. it bonds with the metal on a molecular level.

but, if you get the pad hot, and then come to a complete stop, a bunch of pad material can bake into the rotor, which makes it a high point on the rotor’s friction surface, which causes brake judder, which you’d probably end up replacing the rotors to fix claiming they’re ‘warped’ :rofl

---

_[View the full topic](https://forums.speedlife.net/t/erngottis-08-evox/255807)._