# esford90's 1990 CRX Si Build **URL:** \ **Category:** Builds\ **Created:** [January 13, 2010, 11:50pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177 "2010-01-13T23:50:28Z")\ **Posts on this page:** 20\ **Page:** 5
**Author:** ![laymone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laymone/32/48908_2.png) [@laymone](https://forums.speedlife.net/u/laymone)\ **Post date:** [February 10, 2010, 9:38am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/81 "2010-02-10T09:38:03Z")
i believe you can just use the cable vss on the hydro tranny and retain stock cluster. that what im doing on my k swap ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 10, 2010, 3:35pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/82 "2010-02-10T15:35:19Z")
i would need one from an integra b series cable tranny tho right? i got my innovative mounts today from swerve…thanks! i was not able to order the motor today because i was in the hospital for the last 6 hours due to my girlfriends car having an affair with a tree…i will order it tomorrow and will have it sometime next week i would guess ---
**Author:** ![laymone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laymone/32/48908_2.png) [@laymone](https://forums.speedlife.net/u/laymone)\ **Post date:** [February 10, 2010, 9:18pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/83 "2010-02-10T21:18:38Z")
using the d is fine. everyone mounts came in but mine. ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 10, 2010, 9:24pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/84 "2010-02-10T21:24:12Z")
> [@laymone](#): > > using the d is fine. everyone mounts came in but mine. ok thanks for the info man :tup: im sure your mounts will be in well before you need them, but then again you need that piece to weld in right? ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 11, 2010, 11:43am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/85 "2010-02-11T11:43:24Z")
here is some pictures of the goods i got in yesterday…i ordered the motor and they said sometime early next week it should be at my house ![http://i860.photobucket.com/albums/ab163/esford90/P2100311.jpg](http://i860.photobucket.com/albums/ab163/esford90/P2100311.jpg) ![http://i860.photobucket.com/albums/ab163/esford90/P2100310.jpg](http://i860.photobucket.com/albums/ab163/esford90/P2100310.jpg) ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [February 11, 2010, 11:47am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/86 "2010-02-11T11:47:51Z")
I still say use a remote FPR. Even this joint: [http://cgi.ebay.com/ebaymotors/FueLab-Adjustable-Fuel-Pressure-Regulator-AFPR-51502\_W0QQcmdZViewItemQQhashZitem439d12344cQQitemZ290398024780QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories](http://cgi.ebay.com/ebaymotors/FueLab-Adjustable-Fuel-Pressure-Regulator-AFPR-51502_W0QQcmdZViewItemQQhashZitem439d12344cQQitemZ290398024780QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories) ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 11, 2010, 11:49am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/87 "2010-02-11T11:49:33Z")
for a stock motor though? the advantages using this on a stock motor isnt worth it is it? ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [February 11, 2010, 11:50am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/88 "2010-02-11T11:50:12Z")
Oh for some reason I thought you were going turbo. ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 11, 2010, 11:53am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/89 "2010-02-11T11:53:32Z")
naw lol, maybe sometime in the future…but problably not ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [February 11, 2010, 2:34pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/90 "2010-02-11T14:34:32Z")
DON’T use a D Series VSS Look at the gear, it’s plastic. B Series are metal i might have one, if i find it you can have it your motor doesn’t come with one? ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 11, 2010, 7:22pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/91 "2010-02-11T19:22:00Z")
my motor comes with an electronic one, i need a cable b series one till i do a cluster swap ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 13, 2010, 5:55am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/92 "2010-02-13T05:55:13Z")
primer is finished, im waiting on my 90 degree female to female fitting because they are on backorder through summit. I need this in order to find out where im going to mount the bulkhead to 90 degree fitting to fuel filter on the firewall sometime in march the engine bay will be painted,then I can start to reassemble the shipping company for the motor said that the will have a liftgate truck in my area on wednesday between 12:30 and 3. So my engine will be here then and I can start taking stuff off of that to clean it up before I install it after paint. pretty much all i need to do is order is my engine harness and some more stuff for my fuel setup hopefully my goal to have it done buy mid to late april will happen ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [February 13, 2010, 6:49am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/93 "2010-02-13T06:49:56Z")
:tup: There is a guy selling a b18a1 in the classifieds, maybe see if u can snag the vss of it if he still has one ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 13, 2010, 8:18am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/94 "2010-02-13T08:18:51Z")
thanks man ill ask him ---
**Author:** ![540guy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/540guy/32/5052_2.png) [@540guy](https://forums.speedlife.net/u/540guy)\ **Post date:** [February 16, 2010, 12:59pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/95 "2010-02-16T12:59:24Z")
> [@sLONISMO](#): > > update > > ![http://farm5.static.flickr.com/4017/4324085876_50baf8681d.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/3/c/3c60bd6fdc42176a0fb9471ac4ec6e6bc946f83d.jpeg) what is wrong with this picture it looks like poo poo. ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 16, 2010, 5:38pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/96 "2010-02-16T17:38:20Z")
its edited (not by me) thanks anyways will have pictures up of the motor tomorrow when it gets here ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 17, 2010, 10:27pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/97 "2010-02-17T22:27:47Z")
i got the motor, but didnt have a chance to go to my girlfriends house to upload photos the motor looks awsome and seems very mint…i got the ps pump off and the ac compressor along with some other little shit i dont need like the hydro clutch release and stuff like that if anyone needs any of the parts i stated above PM me…all parts came off of an obd1 b-16 and have less than 30xxx miles on them so they are mint ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [February 18, 2010, 11:14am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/98 "2010-02-18T11:14:53Z")
well after removing the harness and everything i dont need, i took some more stuff off just to clean it up a little this is what it looks like now ![http://i860.photobucket.com/albums/ab163/esford90/P2180317.jpg](http://i860.photobucket.com/albums/ab163/esford90/P2180317.jpg) ![http://i860.photobucket.com/albums/ab163/esford90/P2180318.jpg](http://i860.photobucket.com/albums/ab163/esford90/P2180318.jpg) ![http://i860.photobucket.com/albums/ab163/esford90/P2180319.jpg](http://i860.photobucket.com/albums/ab163/esford90/P2180319.jpg) ![http://i860.photobucket.com/albums/ab163/esford90/P2180320.jpg](http://i860.photobucket.com/albums/ab163/esford90/P2180320.jpg) ---
**Author:** ![91MR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91mr2/32/7217_2.png) [@91MR2](https://forums.speedlife.net/u/91MR2)\ **Post date:** [February 18, 2010, 11:33am UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/99 "2010-02-18T11:33:07Z")
Cool project. ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [February 18, 2010, 12:59pm UTC](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177/100 "2010-02-18T12:59:40Z")
wow, that motor is like brand new lol [Previous page](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177.md?page=4) [Next page](https://forums.speedlife.net/t/esford90s-1990-crx-si-build/78177.md?page=6)